Abstract:Amorphous alloys exhibit unique physical and mechanical properties, which are closely connected with their microstructural heterogeneity. The correlation between structural heterogeneity and mechanical properties is one of the important issues of amorphous alloys. Micro-alloying is an effective way to tune the mechanical and physical properties of amorphous alloys. In the present study, Zr50–xCu34Ag8Al8Pdx (x = 0 and 2) amorphous alloys with ability to form excellent glass are chosen as model alloys. The evolutions of heat flow and shear modulus in different states (as-cast, relaxed and crystalline) with temperature of Zr50–xCu34Ag8Al8Pdx (x = 0 and 2) glass system are studied by differential scanning calorimetry (DSC) and electromagnetic-acoustic transformation (EMAT) technique, respectively. The experiment demonstrates that a decrease of the shear modulus is accompanied by the endothermic heat flow and vice versa. The correlation between the heat flow and shear modulus is investigated according to the interstitialcy theory. The calculations of the interstitialcy defect concentration and activation energy spectra suggest that the microstructure remains stable at relatively low temperatures. When temperature increases, the interstitialcy defect structure is activated. Compared with that in the as-cast state, the interstitialcy defect concentration in the relaxed state is reduced by structural relaxation, indicating that temperature-dependent shear modulus softening is inhibited. At temperatures above glass transition temperature, a rapid growth of interstitialcy defect concentration results in the accelerated shear softening, which is accompanied by significant endothermic heat flow. It is noted that the minor addition of palladium reduces the interstitialcy defect concentration in the Zr50–xCu34Ag8Al8Pdx (x = 0 and 2) metallic glass systems. It is suggested that the introduction of Pd reduces the atomic mobility and increases the characteristic relaxation time. In parallel, the change of shear modulus as a function of the aging time (below the glass transition temperature) is studied by using EMAT equipment. The results indicate that the interstitialcy defect concentration decreases in the physical aging process, which is accompanied by an increase of shear modulus. The interstitialcy defect concentration and shear modulus change towards the quasi-equilibrium state with aging time increasing. A reduction of the interstitialcy defect concentration leads to a decrease of the shear modulus change upon microalloying by Pd into Zr50–x Cu34Ag8Al8Pdx (x = 0 and 2) metallic glass system.

Shear-Accelerated Crystallization In A Supercooled Atomic Liquid

Crystallization-aided extraordinary plastic deformation in nanolayered crystalline Cu/amorphous Cu-Zr micropillars

Localized crystallization in shear bands of a metallic glass

Isochronal and isothermal crystallization in Zr55Cu30Ni5 Al10 bulk metallic glass

Stress-Driven Crystallization Via Shear-Diffusion Transformations in A Metallic Glass at Very Low Temperatures

Deformation and Crystallization of a Zr41.2Ti13.8Cu12.5Ni10Be22.5 Bulk Metallic Glass in the Supercooled Liquid Region

Mechanical Annealing in the Flow of Supercooled Metallic Liquid

Evolution of Defect Concentration in Zr50–xCu34Ag8Al8Pdx (x = 0, 2) Amorphous Alloys Derived Using Shear Modulus and Calorimetric Data

Crystallization on Supercooled Liquid in Metallic Zr-Cu-Al Glasses

In situ phase separation and flow behavior in the glass transition region

Crystallization mechanism and stabilization of supercooled liquid during heating in ZrCu based metallic glasses

Suppression of Quasicrystallization by Nonlinear Viscous Flow in Zr–Al–Ni–Cu–Pd Glassy Alloys

Shear-accelerated crystallization of glass-forming metallic liquids in high-pressure die casting

In-situ Visualizing Atomic Structural Evolution During Crystallization in Ternary Zr-Cu-Al Bulk Metallic Glasses

Superplastic Deformation of Supercooled Liquid in Zr-Based Bulk Glassy Alloys Containing Nano-Quasicrystalline Particles

Structural Origins for the High Plasticity of a Zr–Cu–Ni–Al Bulk Metallic Glass

Superplastic deformation behavior of Zr41.25Ti13.75Ni10Cu12.5Be22.5 bulk metallic glass in the supercooled liquid region

Anomalous Crystallization As A Signature of the Fragile-To-Strong Transition in Metallic Glass-Forming Liquids

Crystallization Kinetics of an Au-based Metallic Glass Upon Ultrafast Heating and Cooling

Investigation of Viscosity and Crystallization in Supercooled-Liquid Region of Zr-Based Glassy Alloys

Intrinsic shear transformations in metallic glasses