Abstract:The ongoing depletion of shallow resources has led to the mining of progressively deeper deposits, where high-temperature thermal stresses pose heat hazards and threaten worker safety. Mitigating geothermal hazards is therefore an essential component of mining operations in deep mines. In this paper, a novel synergetic mining approach is proposed that controls heat hazards at low cost and simultaneously exploits mineral and geothermal energy. Injection and production channels are designed below the ventilation tunnel to synchronously cool the tunnel surrounding rock and exploit mine geothermal energy. A fully coupled numerical model is established that simultaneously simulates heat and mass transfer in a large-scale ventilation network and geological reservoir. The cooling effect on the tunnel and heat recovery capacity of geothermal exploitation are investigated to assess the feasibility of the proposed scheme. Three case studies are presented to identify the impact of the water injection and production channel layout on the heat and mass transfer characteristics in the rock layer. The temperature of the tunnel surrounding rock is cooled over a few years via low-temperature water injection into the mine and heat production in the deep rock layer; this rapidly reduces the air temperature inside the tunnel. The total heat production rate initially rapidly increases and then gradually decreases. In the ninth year, the maximum heat production rate of the production channel reached 6.01 × 103 kW. The cooling effect on the roadway and heat production performance are optimal when the water injection channel is arranged under the air intake side of the main ventilation roadway of the mine and the heat production channel is arranged in the deep rock under the return air side of the roadway. After 4 years of water injection, the temperature at the end of the tunnel in Case 1 rapidly decreased to 30.9°C; this temperature is 6.6°C and 3.4°C lower than those in Cases 2 and 3, respectively. Longer injection channel lengths can significantly reduce the injection pressure requirement in the injection channel. Shorter distances between the injection channel and tunnel are associated with faster reductions of the tunnel temperature. This technique significantly improves the thermal comfort inside the tunnel and produces considerable geothermal energy; a single heat production channel can produce 1.68 × 1015 J over a period of 10 years.

Application of a Novel Liquid Nitrogen Control Technique for Heat Stress and Fire Prevention in Underground Mines.

A New Approach to Control a Serious Mine Fire with Using Liquid Nitrogen As Extinguishing Media

Impact of Heat and Mass Transfer During the Transport of Nitrogen in Coal Porous Media on Coal Mine Fires.

Study on Multi Field Coupling Numerical Simulation of Nitrogen Injection in Goaf and Fire-Fighting Technology

Study of energy-efficient heat resistance and cooling technology for high temperature working face with multiple heat sources in deep mine

Investigation on a mobile fire extinguishing approach using liquid carbon dioxide as inert medium for underground mine

Synergetic mining of geothermal energy in deep mines: An innovative method for heat hazard control

A Comprehensive Set of Cooling Measures for the Overall Control and Reduction of High Temperature-Induced Thermal Damage in Oversize Deep Mines: A Case Study

Research and numerical simulation on nitrogen injection scheme in goaf of 1303 fully mechanized caving face in Jinniu mine

Distribution of spontaneous combustion three zones and optimization of nitrogen injection location in the goaf of a fully mechanized top coal caving face

Study on Nitrogen Injection Fire Prevention and Extinguishing Technology in Spontaneous Combustion Gob Based on Gob-Side Entry Retaining

The Application of Nitrogen Curtain Technology to Longwall Goaf to Prevent the Spontaneous Combustion of Coal: A Case Study in Shajihai Coalmine, China

Coupling Relation between the Location of Cross-Cut Negative Pressure and Injecting Nitrogen into Coal Mine Goaf

Study on Spontaneous Combustion "Three Zones" of the Distribution Law and Integrated Fire Prevention Technology in Mined-Out Area of Lingquan Mine

Feasibility analysis of mixed cooling with liquid nitrogen and liquid oxygen

Study on the Parameters of Collaborative Fire Prevention by Plugging Air Leakage with Isolation Wall and Injecting Nitrogen in the Goaf of Re-Mining Working Face

Research on the Mobile Refrigeration System at a High Temperature Working Face of an Underground Mine

Numerical simulation of mine heat hazard governance and geothermal resource exploitation using extraction-ventilation collaborative method

Integrated Control Technique for Losing Coal Spontaneous Combustion of the Top-Coal Falling Region in High-Gas Mine

Analysis and Practical of Cooling Measures in Coal Mine Fire Area

Research on the technology of uniformly injecting nitrogen into the porous long pipes in the gob of the gob-side entry retaining mining mode with roof cutting and pressure relief