Abstract:Wrinkles, as a form of mechanical instability, can be employed in many different areas, including self-cleaning coating, flexible electronics, smart adhesion, channel for microfluidic devices, and mechanical property measurements. After two decades of research, the wavelength and amplitude of wrinkles can be well controlled by proper design of physical properties of thin films and substrates. However, it is still very difficult to change their orientations and complexity in a single piece of thin film, which is critically important for many practical applications. In previous studies, the orientation of all the wrinkles are either along the same direction or can only be controlled to some extent by the patterning of relief structures which rely on the complicated lithography techniques and cannot be adjusted for a given substrate. Here, we employed the shape memory polymer (SMP) as a smart substrate, combined with local/selective heating to control the boundary conditions for the strain field, and realized the gradual change in the orientation of wrinkles in a single piece of thin film. The wrinkles with a gradual change in orientations exhibited angle-dependent colors. Furthermore, by changing the sequence of thin film coating and partial triggering of an SMP, complex surface features with a sharp interface can be obtained. Finite element simulation investigations uncover the basic principles and requirements that need to be satisfied, as well as the limitations of our method, to generate wrinkles with controlled orientations in a single piece of thin film.

Tunable Formation of Ordered Wrinkles in Metal Films with Controlled Thickness Gradients Deposited on Soft Elastic Substrates.

Spatially Configuring Wrinkle Pattern and Multiscale Surface Evolution with Structural Confinement

Unique Aspects of a Shape Memory Polymer As the Substrate for Surface Wrinkling.

Tunable Spatially Dependent Wrinkling Morphologies on Pre-Curved Surfaces

Hierarchical Wrinkles and Oscillatory Cracks in Metal Films Deposited on Liquid Stripes.

Formation of Wrinkled Patterns in Metal Films Deposited on Elastic Substrates: Tunability and Wettability

Surface Wrinkling with Memory for Programming Adhesion and Wettability

Localization of Wrinkle Patterns by Crack-Tip Induced Plasticity: Experiments and Simulations

Controlled Wrinkling Patterns in Periodic Thickness-Gradient Films on Polydimethylsiloxane Substrates

Harnessing Heterogeneous Wrinkles in Metal/Polydimethylsiloxane Film System by Combination of Mechanical Loading and Heat Treatment

Wrinkling of structured thin films via contrasted materials.

Controlled Formation of Surface Patterns in Metal Films Deposited on Elasticity-Gradient PDMS Substrates.

Surface effects on the wrinkles in a stiff thin film bonded to a compliant substrate

Controlled wrinkling patterns and surface friction by thickness gradient

Harnessing Fold-to-wrinkle Transition and Hierarchical Wrinkling on Soft Material Surfaces by Regulating Substrate Stiffness and Sputtering Flux

Wrinkling Behavior of Variable Thickness Films Bonded to Elastic Substrates

Harnessing multimodal wrinkle patterns in flexible films by three-axial mechanical loading

Wrinkles with Changing Orientation and Complexity in a Single Piece of Thin Film

Wrinkling of Thin Films on a Microstructured Substrate

Surface Wrinkling Patterns of Film–Substrate Systems with a Structured Interface

Regulating Wrinkling Patterns by Periodic Surface Stiffness in Film-Substrate Structures