Abstract:A peculiar nanostructure consisting of nitrogen-doped, carbon-encapsulated (N-C) SnO2@Sn nanoparticles grafted on three-dimensional (3D) graphene-like networks (designated as N-C@SnO2@Sn/3D-GNs) has been fabricated via a low-cost and scalable method, namely an in situ hydrolysis of Sn salts and immobilization of SnO2 nanoparticles on the surface of 3D-GNs, followed by an in situ polymerization of dopamine on the surface of the SnO2/3D-GNs, and finally a carbonization. In the composites, three-layer core-shell N-C@SnO2@Sn nanoparticles were uniformly grafted onto the surfaces of 3D-GNs, which promotes highly efficient insertion/extraction of Li(+). In addition, the outermost N-C layer with graphene-like structure of the N-C@SnO2@Sn nanoparticles can effectively buffer the large volume changes, enhance electronic conductivity, and prevent SnO2/Sn aggregation and pulverization during discharge/charge. The middle SnO2 layer can be changed into active Sn and nano-Li2O during discharge, as described by SnO2 + Li(+) → Sn + Li2O, whereas the thus-formed nano-Li2O can provide a facile environment for the alloying process and facilitate good cycling behavior, so as to further improve the cycling performance of the composite. The inner Sn layer with large theoretical capacity can guarantee high lithium storage in the composite. The 3D-GNs, with high electrical conductivity (1.50 × 10(3) S m(-1)), large surface area (1143 m(2) g(-1)), and high mechanical flexibility, tightly pin the core-shell structure of the N-C@SnO2@Sn nanoparticles and thus lead to remarkably enhanced electrical conductivity and structural integrity of the overall electrode. Consequently, this novel hybrid anode exhibits highly stable capacity of up to 901 mAh g(-1), with ∼89.3% capacity retention after 200 cycles at 0.1 A g(-1) and superior high rate performance, as well as a long lifetime of 500 cycles with 84.0% retention at 1.0 A g(-1). Importantly, this unique hybrid design is expected to be extended to other alloy-type anode materials such as silicon, germanium, etc.

Boron-Doped, Carbon-Coated Sno2/Graphene Nanosheets for Enhanced Lithium Storage

Nitrogen-Doped Carbon-Encapsulated Sno2-Sns/Graphene Sheets With Improved Anodic Performance In Lithium Ion Batteries

N-Doped Graphene Quantum Dots Supported by Carbon Nanotubes Grown on Carbon Clothes for Lithium Storage

Conformal Conversion of Polyphosphazene@Sb2MoO6 Nanowires to N/S-Doped/Carbon-Coated SbPO4/MoOx for High-performance Lithium Storage

Hybrid of Co-doped SnO2 and graphene sheets as anode material with enhanced lithium storage properties

Facile synthesis of boron-doped porous carbon as anode for lithium–ion batteries with excellent electrochemical performance

Robust and Stable Intercalated Graphene Encapsulation of Tin Nanorods for Enhanced Cycle and Capacity Performance for Lithium Storage

Nitrogen-Doped Carbon-Encapsulated SnO2@Sn Nanoparticles Uniformly Grafted on Three-Dimensional Graphene-like Networks as Anode for High-Performance Lithium-Ion Batteries

Hybrid coating SnO2 for enhanced Li ions storage

Boron-doped single crystal LiNi0.6Mn0.2Co0.2O2 with improved electrochemical performance for lithium-ion batteries

Synthesis and Electrochemical Performance of Nano-Sized Li4ti5o12 Coated with Boron-Doped Carbon

The Effect of Boron Doping on Structure and Electrochemical Performance of Lithium-Rich Layered Oxide Materials.

External and internal Cultivation: Design for Mo-doped SnS 2 /SnO 2 heterostructure on N -doped graphene achieves Kinetics-Enhanced and Superior-Lithium storage performance

Boron-manganese-nitrogen co-doped three-dimensional porous carbon realizes superior capacitive lithium-ion storage

Nanosize SnO₂ confined in the porous shells of carbon cages for kinetically efficient and long-term lithium storage.

In-situ synthesized carbon-coated Sn–SnO2 nanoparticles embedded in carbon nanotubes on Cu foam as anode material for lithium-ion batteries

Boron-doping induced lithophilic transition of graphene for dendrite-free lithium growth

V3S4 Nanosheets Anchored on N, S Co-Doped Graphene with Pseudocapacitive Effect for Fast and Durable Lithium Storage

Carbon Nanotubes Connecting and Encapsulating MoS2-Doped SnO2 Nanoparticles as an Excellent Lithium Storage Performance Anode Material

Encapsulation of TiO2(B) nanowire cores into SnO 2/carbon nanoparticle shells and their high performance in lithium storage

Cobalt-boron Nanoparticles Anchored on Graphene As Anode of Lithium Ion Batteries