Abstract:An important goal in carbon nanotube optoelectronics is to achieve a high-performance near-infrared light source. But there are still many challenges such as the purity of single-walled carbon nanotube (SWCNT) chirality, nonradiative defects, thin-film quality, and device structure design. Here, we realize infrared light-emitting diodes (LEDs) based on chirality-sorted (10, 5) SWCNT network films, which operate at a low bias voltage and emit at a telecom O band of 1290 nm. Asymmetric palladium (Pd) and hafnium (Hf) contacts are used as electrodes for hole and electron injection, respectively. However, the large Schottky barrier at the interface of the SWCNTs and the Hf electrode, primarily resulting from the polymer wrapped on the nanotube surface during the sorting process, leads to inefficient electron injection and thus a low electroluminescence efficiency. We find that the efficiency of electron injection can be improved by the local doping of the nanotubes with dielectric layers of YOX-HfO2, which reduces the Schottky barrier at the SWCNT/Hf interface. Accordingly, the (10, 5) SWCNT film-based LED achieves an external quantum efficiency of larger than 0.05% without any optical coupling structure. With further improvement, we expect that such an infrared light source will have great application potential in the carbon nanotube monolithic optoelectronic integrated system and on-chip optical interconnection, especially in the field of short-distance optical fiber communications and data center.

Flexible Light-Emitting Devices Based on Chirality-Sorted Semiconducting Carbon Nanotube Films.

Microcavity-Controlled Chirality-Sorted Carbon Nanotube Film Infrared Light Emitters

Infrared Light-Emitting Diodes Based on Chirality-Sorted Carbon Nanotube Films

Fully Bendable Polymer Light Emitting Devices with Carbon Nanotubes As Cathode and Anode

All carbon nanotube based flexible field emission devices prepared through a film transfer method

Efficient Carbon Nanotube Field Emitter Using Electrospun Carbon Nanofibers as a Flexible Electrode

Carbon Nanotubes On Carbon Fabrics For Flexible Field Emitter Arrays

Highly Stretchable Carbon Nanotube Fibers with Tunable and Stable Light Emission

Carbon nanotube-based flexible electronics

Lateral Field Emitters Fabricated Using Carbon Nanotubes

Synthesis and Characterization of Carbon Nanotube Grown on Flexible and Conducting Carbon Fiber Sheet for Field Emitter

Highly Flexible Polymer Light-Emitting Devices Using Carbon Nanotubes As Both Anodes and Cathodes

Carbon Nanotube Arrays on Flexible Substrate and Their Field Emission Characteristics

Flexible Carbon Nanotubes Photosensor Array

On-Chip Polarized Light Emitters Based On (6,5) Chirality-Sorted Carbon Nanotube Aligned Arrays

Flat-panel luminescent lamp using carbon nanotube cathodes

High-Performance Carbon Nanotube Light-Emitting Diodes with Asymmetric Contacts

Flexible photodetector based on carbon nanotube fibers

Flexible Full‐Inorganic Ultrathin Films with Stable Circularly Polarized Luminescence Covering the Visible to Near‐Infrared Region

Solid state carbon nanotube device for controllable trion electroluminescence emission

Realizing Flexible Multicolored Electrochromism on Carbon Nanotubes through Thin-Film Interference