Abstract:Flexible lithium ion batteries with high energy density have recently received tremendous interest due to their potential applications in flexible electronic devices. Herein, we report a simple high energy ball-milling technique together with vacuum filtration to fabricate a highly flexible, conductive, robust and free-standing RGO/Co9S8 nanocomposite paper with high conductivity (121 S cm−1), tensile strength (50.4 MPa) and Young's modulus (3.5 GPa) which can be directly used as a free-standing anode for flexible LIBs without binders, conducting agents and metallic current collectors. The free-standing RGO/Co9S8 anode with a high mass active material loading of 66.7 wt% Co9S8 can deliver a high specific capacity of 1415 mA h gCo9S8−1 (944 mA h gelectrode−1) and maintain 573 mA h gCo9S8−1 (382.2 mA h gelectrode−1) after 500 cycles at a current density of 1C (1C = 545 mA g−1). More importantly, the rate capability was improved by introducing RGO. The RGO/Co9S8 anode exhibited impressive capacities of 1096.70 mA h gCo9S8−1 with a capacity recuperability of 69.4% as the current returned to 0.1C. These results demonstrate that the well designed nanocomposite is of great potential as an anode for flexible LIBs. As far as we know, such improved electrochemical performance can be attributed to the nanosized Co9S8 particles with a diameter of ∼25 nm homogeneously dispersed on the surface of high conductive graphene sheets that can be obtained owing to the milling impact stress, which enhances surface electrochemical reactivity and shortens the transport length of lithium ions and electrons. What's more, the large specific surface area of the graphene sheet enables the uniform distribution of Co9S8 and offers better ability to accommodate volume expansion/shrinkage of Co9S8 during repeated charge/discharge cycles.

A self-standing and flexible electrode of yolk-shell CoS2 spheres encapsulated with nitrogen-doped graphene for high-performance lithium-ion batteries.

A Freestanding Flexible Single‐Atom Cobalt‐Based Multifunctional Interlayer Toward Reversible and Durable Lithium‐Sulfur Batteries

Low-Carbon and Nanosheathed ZnCo2O4 Spheroids with Porous Architecture for Boosted Lithium Storage Properties.

Cobalt sulfide nanoparticles restricted in 3D hollow cobalt tungstate nitrogen-doped carbon frameworks incubating stable interfaces for Li-ion storage

Flexible V2O3/carbon Nano-Felts As Free-Standing Electrode for High Performance Lithium Ion Batteries

Facile Synthesis of Ultrasmall CoS2Nanoparticles Within Thin N-Doped Porous Carbon Shell for High Performance Lithium-Ion Batteries

Flexible Li[Li0.2Ni0.13Co0.13Mn0.54]O2/Carbon Nanotubes/Nanofibrillated Celluloses Composite Electrode for High-Performance Lithium-Ion Battery

Self-assembled CoS2 Nanoparticles Wrapped by CoS2-quantum-dots-anchored Graphene Nanosheets As Superior-Capability Anode for Lithium-Ion Batteries

Intermetallic SnSb Nanodots Embedded in Carbon Nanotubes Reinforced Nanofabric Electrodes with High Reversibility and Rate Capability for Flexible Li-ion Batteries

Facile Synthesis of Yolk-Shell Cos2@Fes2@Nc Hollow Microspheres for Advanced Lithium-Ion Batteries Anode Materials

Carbon sphere-templated synthesis of porous yolk-shell ZnCo2O4 spheres for high-performance lithium storage

Ultrathin NixCoy-silicate Nanosheets Natively Anchored on CNTs Films for Flexible Lithium Ion Batteries

Binder-free Flower-Like SnS2 Nanoplates Decorated on the Graphene As a Flexible Anode for High-Performance Lithium-Ion Batteries

Sb Nanoparticles Embedded in the N-Doped Carbon Fibers as Binder-Free Anode for Flexible Li-Ion Batteries

Free‐Standing SnO2/Nitrogen‐Doped Graphene Films As High‐Performance Binder‐Free Electrodes for Flexible Lithium‐Ion Batteries

Engineering Flexible Carbon Nanofiber Concatenated Mof-Derived Hollow Octahedral Cofe2o4 As An Anode Material For Enhanced Lithium Storage

Free-standing ZnSe-CoFe@CNT/CNF heterostructure nanofibers as an ultra-long lifespan and high-rate anode for flexible lithium ion and sodium ion batteries

Graphene/Co9s8 Nanocomposite Paper As A Binder-Free and Free-Standing Anode for Lithium-Ion Batteries

A Self-Standing And Flexible Electrode Of Li4ti5o12 Nanosheets With A N-Doped Carbon Coating For High Rate Lithium Ion Batteries

Sandwiching Defect-Rich TiO2-δ Nanocrystals into a Three-Dimensional Flexible Conformal Carbon Hybrid Matrix for Long-Cycling and High-Rate Li/Na-Ion Batteries.

Facile Synthesis of Yolk–Shell Bi@C Nanospheres with Superior Li-ion Storage Performances