Abstract:Microbial fuel cells (MFCs) incorporating air-breathing cathodes have emerged as a promising ecofriendly wastewater treatment technology capable of operating on an energy-free basis. However, the inevitable biofouling of these devices rapidly decreases cathodic catalytic activity and also reduces the stability of MFCs during long-term operation. The present work developed a novel microbial separator for use in air-breathing MFCs that protects cathodic catalytic activity. In these modified devices, microbes preferentially grow on the microbial separator rather than the cathodic surface such that biofouling is prevented. Trials showed that this concept provided low charge transfer and mass diffusion resistance values during the cathodic oxygen reduction reaction of 4.6 +/- 1.3 and 17.3 +/- 6.8 U, respectively, after prolonged operation. The maximum power density was found to be stable at 1.06 +/- 0.07 W m-2 throughout a long-term test and the chemical oxygen demand removal efficiency was increased to 92% compared with a value of 83% for MFCs exhibiting serious biofouling. In addition, a cathode combined with a microbial separator demonstrated less cross-cathode diffusion of oxygen to the anolyte. This effect indirectly induced the growth of electroactive bacteria and produced higher currents in air-breathing MFCs. Most importantly, the present microbial separator concept enhances both the lifespan and economics of air-breathing MFCs by removing the need to replace or regenerate the cathode during longterm operation. These results indicate that the installation of a microbial separator is an effective means of stabilizing power generation and ensuring the cost-effective performance of air-breathing MFCs intended for future industrial applications.(c) 2023 The Authors. Published by Elsevier B.V. on behalf of Chinese Society for Environmental Sciences, Harbin Institute of Technology, Chinese Research Academy of Environmental Sciences. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).

Anolyte recirculation effects in buffered and unbuffered single-chamber air-cathode microbial fuel cells.

A self-recirculation electrolyte system for unbuffered microbial fuel cells with an aerated cathode.

Effect of Buffer Charge on Performance of Air-Cathodes Used in Microbial Fuel Cells

Step-feed strategy enhances performance of unbuffered air-cathode microbial fuel cells

Effect of Proton Transfer on the Performance of Unbuffered Tubular Microbial Fuel Cells in Continuous Flow Mode

Temporal Variations of Cathode Performance in Air-Cathode Single-Chamber Microbial Fuel Cells with Different Separators

Effect of cathode electron acceptors on simultaneous anaerobic sulfide and nitrate removal in microbial fuel cell

Effect of anaerobic sludge on the bioelectricity generation enhancement of bufferless single-chamber microbial fuel cells

Effect of Nitrate on Electricity Generation in Single-Chamber Air Cathode Microbial Fuel Cells

Microbial Fuel Cells: the Effects of Configurations, Electrolyte Solutions, and Electrode Materials on Power Generation

Effects of bio- and abio-factors on electricity production in a mediatorless microbial fuel cell

Improving Phosphate Buffer-Free Cathode Performance of Microbial Fuel Cell Based on Biological Nitrification

Performance of a Batch Two‐chambered Microbial Fuel Cell Operated at Different Anode Potentials

Influence of Coulombic Efficiency in Air-Cathode Microbial Fuel Cell by Temperature and Baffle-Microfiltration Membrane Barrier

Effect of Anolytic Nitrite Concentration on Electricity Generation and Electron Transfer in a Dual-Chamber Microbial Fuel Cell.

Cathodic Biofouling Control by Microbial Separators in Air-Breathing Microbial Fuel Cells

Enhancing the stability of power generation of single-chamber microbial fuel cells using an anion exchange membrane

Effect of Cathode Types on Long-Term Performance and Anode Bacterial Communities in Microbial Fuel Cells

Improved Performance of Air-Cathode Single-Chamber Microbial Fuel Cell for Wastewater Treatment Using Microfiltration Membranes and Multiple Sludge Inoculation

Performance Improvement of MFCs by Treatment of Carbon Cloth Anode with Ultrasonic or Spent Anolyte

Improved Performance of Microbial Fuel Cells Enriched with Natural Microbial Inocula and Treated by Electrical Current