Abstract:1 General Introduction A key to the realization of effective microwave tunable devices, among others, is to develop adaptive materials with superior adjustability of electromagnetic parameters. Since there are two fundamental electromagnetic parameters, namely, permittivity and permeability, the tunable property can then be readily approached by manipulating (i) permittivity directly via the electric field, such as in ferroelectrics and conducting polymer [1, 2], or (ii) permeability via magnetic field, such as in ferromagnetic materials [3], or (iii) permittivity (permeability) indirectly by magnetic field (electric field) such as in multiferroics [4]. A unique class of composite materials is considered here to realize such tunable properties: ferromagnetic microwires with excellent soft magnetic properties and giant magnetoimpedance effect [5,6] were introduced into a polymer matrix material so that an indirect control of permittivity can be tuned by the magnetic field. The principle is that the magnetic field can induce significant variation of the impedance via the skin effect at high frequency. The current distribution along the wire then changes accordingly and induces the dipolar polarization [7]. There have been a few relevant studies on this subject in the open literature. Panina et al. [8] and Acher et al. [9] used the microwire arrays to realize the left-hand materials and tunable properties in the presence of magnetic field. Starostenko et al. [10] gave an in-depth discussion of the magnetic bias effect on the permittivity for random wire composites and proved the feasibility of using the wire composites to control attenuation. Di et al. [11], Marin et al. [12] and Zhang et al. [13] have demonstrated the perspective of microwire composites as microwave absorbers. In addition, our previous studies have shown that this kind of composite prove to be multifunctional for a wide range of potential engineering applications such as sensing and structural health monitoring (see e.g. [14-16]). The aim of this paper is to utilize instrumentation [17] dedicated to precise in-situ measurements of electromagnetic parameters to characterize the microwire composites over a broad frequency range and the field effect on the microwave behaviors of the wire composites for potential structural health monitoring (SHM) application.

Magnetically Tunable Mie Resonance-Based Dielectric Metamaterials

Tunable Dielectric Properties of Ferrite-Dielectric Based Metamaterial.

Giant magnetodielectric metamaterial

Magnetically Tunable Fano Resonance with Enhanced Nonreciprocity in a Ferrite-Dielectric Metamolecule

Tunable Ferrite-Dielectric Metamolecule with Fano Resonance

Thermally Tunable Electric Mie Resonance of Dielectric Cut-Wire Type Metamaterial.

Coupled Magnetic Mie Resonances Induced Extraordinary Optical Transmission and Its Non-Linear Tunability

A Double-Negative Waveguide Metacomposite Enabled by Ferromagnetic Microwires

MAGNETICALLY TUNABLE FERRITE-DIELECTRIC LEFT-HANDED METAMATERIAL

Thermally Controllable Mie Resonances in a Water-Based Metamaterial

Electrically tunable metasurface based on Mie-type dielectric resonators

Microwave tunable composites with melt-extracted magnetic microwires

Magnetic Coupling Effect of Mie Resonance-Based Metamaterial with Inclusion of Split Ring Resonators

Controlling Electromagnetic Wave Based on Magnetic Metamaterials

Tunable Anisotropic Parameters Realized by Metal-Dielectric Hybrid Meta-Atoms

All Dielectric Terahertz Left-Handed Metamaterial Based on Mie Resonance Coupling Effects

Electric Tunability of Microwave Permeability Dispersion Behaviors of Metamaterials

Magnetic Tuning of Electrically Resonant Metamaterial with Inclusion of Ferrite

Temperature Tuning Mie Resonance-Based All-Dielectric Metamaterial

Auxetics-Inspired Tunable Metamaterials for Magnetic Resonance Imaging

Tunable Control of Mie Resonances Based on Hybrid VO2 and Dielectric Metamaterial