Abstract:Microbial fuel cells (MFCs) use bacteria to convert chemical energy in an organic substrate to electrical energy. MFC biosensoric capabilities are based on its ability to detect a change in current or voltage caused by the introduction of an analyte. The operating principle is the linear relationship between the analyte concentration and the current output in the biosensor. The objective of this review is to provide an overview of the application of MFC biosensors for water and wastewater monitoring through biological/chemical oxygen demand (BOD/COD) or toxicity. While most reviews focus on operating principles and designs/configurations of MFC biosensors, this review mainly covers microbial consortium, current generation mechanisms and performance indicators. Factors affecting operation and challenges of the technology are also discussed. MFC biosensors have been widely investigated because of their simple architecture, cost-effective construction and their potential self-sustaining power source. An efficient MFC biosensor must be capable of rapid and precise in situ monitoring of a target compound, have long operational stability with low maintenance requirements and quick recovery after sudden disturbance. MFC biosensor performance is limited by several factors, including electron transfer at the anode, substrate concentration, internal resistance of the system and environmental variables (i.e., temperature and pH). These limitations could be minimized by improving the reactor materials, design and operation. However, practical applications have proven that improving one factor does not necessarily result in an overall improvement in performance. The key to an efficient biosensor is establishing a combination of conditions that allow optimal performance of the biosensor without compromising sensitivity or stability. Microbial fuel cells (MFCs) use bacteria to convert chemical energy in an organic substrate to electrical energy. MFC biosensoric capabilities are based on its ability to detect a change in current or voltage caused by the introduction of an analyte. MFC biosensors have been widely investigated because of their simple architecture, cost-effective construction and their potential self-sustaining power source. An efficient MFC biosensor must be capable of rapid and precise in situ monitoring of a target compound, have long operational stability with low maintenance requirements and quick recovery after sudden disturbance. In water and wastewater monitoring, MFCs can offer the capability of simultaneous treatment of contaminated medium and generation of a measured concentration response within a short response time, in contrast with traditional methods. The biosensing element of MFC biosensors will be an electroactive microorganism at the anode or cathode electrode surface.

An MFC-based Online Monitoring and Alert System for Activated Sludge Process.

Performance of a Microbial Fuel Cell-Based Biosensor for Online Monitoring in an Integrated System Combining Microbial Fuel Cell and Upflow Anaerobic Sludge Bed Reactor.

Optimization of Sensing Performance in an Integrated Dual Sensors System Combining Microbial Fuel Cells and Upflow Anaerobic Sludge Bed Reactor

Novel online monitoring and alert system for anaerobic digestion reactors.

Microbial fuel cell based biosensor for in situ monitoring of anaerobic digestion process.

Recent Advances in Microbial Fuel Cells Integrated with Sludge Treatment

Microbial fuel cell sensors for water quality early warning systems: Fundamentals, signal resolution, optimization and future challenges

Water pollution organism early warning system and method based on principle of microbial fuel cells

Using Microbial Fuel Cell to Dispose Waste Water to Generate Electric Power and Drive the Monitoring System

Development of a Novel Membrane-less Microbial Fuel Cell (ML-MFC) with a Sandwiched Nitrifying Chamber for Efficient Wastewater Treatment

A Microbial Fuel Cell-Based Detection System for the Heating Value of Sludge

Microbial fuel cell-based biosensor for online monitoring wastewater quality: A critical review

Different responses of toxic substances in microbial fuel cells

Two-stage Microbial Fuel Cell (MFC) and Membrane Bioreactor (MBR) System for Enhancing Wastewater Treatment and Resource Recovery Based on MFC As a Biosensor

Integration of A Microbial Fuel Cell with Activated Sludge Process for Energy-Saving Wastewater Treatment: Taking A Sequencing Batch Reactor As an Example

Microbial Fuel Cell Sensors for Water and Wastewater Monitoring

Development of an innovative MFC-biosensor for real-time monitoring of anaerobic digestion for biogas production: Controlled substrate feeding strategy

Factors Affecting the Performance of a Single-Chamber Microbial Fuel Cell-Type Biological Oxygen Demand Sensor

The Environmental Study of Simultaneous Organics Removal and Bioelectricity Generation and Analysis of Economic Benefit in Pilot-scale AA/O-MFC during Long-term Operation

Microbial fuel cell-based biosensors for environmental monitoring: a review.

Focusing on the process diagnosis of anaerobic fermentation by a novel sensor system combining microbial fuel cell, gas flow meter and pH meter