Abstract:A microbial fuel cell (MFC), as a cleaner wastewater treatment process, can recover electricity from organic wastes. However, high power production and high quality effluent are difficult to achieve simultaneously. In this study, a novel filtration composite anode (FCA), which combined carbon fiber brush and carbon textile was proposed to enhance COD removal and power generation performance of MFCs. The COD removal rate constant of MFCs with the filtration composite anode (FCA-MFC) was 033 h(-1), much higher than that of MFCs with single brush anode (FB-MFC) (0.23 h(-1)) or textile anode (FT-MFC) (0.18 h(-1)) in the recirculation mode, and also exceeded that of CA-MFC in non-recirculation mode (0.12 h(-1)). FCA-MFC delivered a maximum power density of 1140 mW m(-2) at a recirculation rate of 2 mL min(-1), which was higher than the FB-MFC (990 mW m(-2)) and the FT-MFC (80 mW m(-2)) and its counterparts in non-recirculation mode (1000 mW m(-2)). Moreover, the FCA-MFC maintained a higher current density (4.0 A m(-2)) than the other two MFCs until the COD decreased to 40 mg L-1 at an external resistance of 100 Omega. CV and EIS tests verified a higher electrochemical performance of the filtration composite anode. These results demonstrated higher COD removals and power generation of the composite anode at ambient temperature, resulting from the filtration effect that facilitated mass transfer, increased microbial colonization, and improved electrochemical activity. Considering the high-quality effluent and high power generation, the filtration composite anode configuration promises a great potential for sustainable wastewater treatment application. (C) 2018 Elsevier Ltd. All rights reserved.

In-situ integration of microbial fuel cell with hollow-fiber membrane bioreactor for wastewater treatment and membrane fouling mitigation.

Integrating Microbial Fuel Cells with Anaerobic Acidification and Forward Osmosis Membrane for Enhancing Bio-Electricity and Water Recovery from Low-Strength Wastewater.

A Microbial Fuel Cell–membrane Bioreactor Integrated System for Cost-Effective Wastewater Treatment

Integration of Microbial Fuel Cell with Independent Membrane Cathode Bioreactor for Power Generation, Membrane Fouling Mitigation and Wastewater Treatment

In Situ Investigation of Processing Property in Combination with Integration of Microbial Fuel Cell and Tubular Membrane Bioreactor

Development of a Novel Membrane-less Microbial Fuel Cell (ML-MFC) with a Sandwiched Nitrifying Chamber for Efficient Wastewater Treatment

Performance of a Combined System of Microbial Fuel Cell and Membrane Bioreactor: Wastewater Treatment, Sludge Reduction, Energy Recovery and Membrane Fouling.

Analysis of performances of microbial fuel cell-membrane bioreactor system

Membrane fouling reduction in a cost-effective integrated system of microbial fuel cell and membrane bioreactor.

Microbial Fuel Cell-Membrane Bioreactor Integrated System for Wastewater Treatment and Bioelectricity Production: Overview

Investigation and evaluation of membrane fouling in a microbial fuel cell-membrane bioreactor systems (MFC-MBR)

Integration of A Microbial Fuel Cell with Activated Sludge Process for Energy-Saving Wastewater Treatment: Taking A Sequencing Batch Reactor As an Example

Assessment of an Anaerobic Membrane Bio-Electrochemical Reactor (anmber) for Wastewater Treatment and Energy Recovery

Two-stage Microbial Fuel Cell (MFC) and Membrane Bioreactor (MBR) System for Enhancing Wastewater Treatment and Resource Recovery Based on MFC As a Biosensor

Power Generation Enhanced by a Polyaniline–phytic Acid Modified Filter Electrode Integrating Microbial Fuel Cell with Membrane Bioreactor

Towards Bio-Utilization and Energy Recovery Potential Exploration of Membrane Foulant from Membrane Bioreactor by Using Microbial Fuel Cell-Centered Technology.

Improved Performance of Air-Cathode Single-Chamber Microbial Fuel Cell for Wastewater Treatment Using Microfiltration Membranes and Multiple Sludge Inoculation

Improving Electricity Generation and Substrate Removal of a MFC–SBR System Through Optimization of COD Loading Distribution

A Novel Filtration Composite Anode Configuration of Microbial Fuel Cell for Efficient Wastewater Treatment and Enhanced Power Generation

Integration of Bio-Electrochemical Cell in Membrane Bioreactor for Membrane Cathode Fouling Reduction Through Electricity Generation