Abstract:The present study proposes and experimentally verifies a refractive index (RI) sensor with high sensitivity and simple structure based on multimode Mach-Zehnder interference (MZI), in which a suspend-core fiber (SCF) fused with single-mode fibers (SMFs) at both ends worked as the sensing unit. Femtosecond laser is used to process SCF, forming microfluidic channels for liquid in and out, and then encapsulation is conducted to enhance mechanical characteristics of the MZI sensor. By analyzing simulation and experimental results, it has been confirmed that the multimode MZI arises from the effective RI difference between the fundamental mode and the higher-order modes of the SCF core induced by RI variations of external environment. This study involves the preparation and testing of three sensors with varying SCF lengths. As the external RI varies in range of 1.3333 to 1.3472, all sensors exhibit sensitivities at a comparable level. This observation aligns well with the theoretical analysis, indicating that fiber length does not have direct impact on the sensing performance. The maximum sensitivity was 1825.41 nm/RIU. The three sensors undergo tests to assess their repeatability and stability, revealing a maximum wavelength error of 0.1975 nm for repeatability and 0.18 nm for stability. In addition, the temperature sensitivity within the range of 20-100 °C is found to be as low as 0.00667 nm/°C, indicating that the potential impact of temperature-induced wavelength shift can be disregarded. The sensor exhibits high sensitivity, excellent repeatability and stability, promising extensive application in diverse fields including biology, chemistry, medicine, and environmental monitoring.

Ultrasensitive Refractive Index Sensor Based on a Mach-Zehnder Interferometer Created in Twin-Core Fiber.

Highly Sensitive Refractive Index Sensor Based on Novel Mach–Zehnder Interferometer with Multimode Fiber–thin Core Fiber–multimode Fiber Structure

Ultrasensitive Refractive Index Sensor Based on Mach–Zehnder Interferometer and a 40μm Fiber

Simultaneous Measurement of Refractive Index and Temperature Using a Mach-Zehnder Interferometer with Forward Core-Cladding-core Recoupling

Improved optical fiber Mach-Zehnder high-sensitivity refractive index sensor

Highly Sensitive Refractive Index Fiber Inline Mach–Zehnder Interferometer Fabricated by Femtosecond Laser Micromachining and Chemical Etching

Dual Mach–Zehnder Interferometer Based on Side-Hole Fiber for High-Sensitivity Refractive Index Sensing

Temperature and Refractive Index Sensor Based on an Etched Thin Core Fiber

Tapered Fiber-Optic Mach-Zehnder Interferometer for Ultra-High Sensitivity Measurement of Refractive Index

Refractive Index Measurement Based on Thin-Core Fiber In-Line Mach-Zehnder Interferometer and Differential Intensity Demodulation

High Sensitivity Refractive Index Sensing of Mach–Zehnder Interferometer Based on Multimode Fiber Core Sandwiched Between Two Waist-Enlarged Fiber Tapers

TCF-MMF-TCF fiber structure based interferometer for refractive index sensing

High-Sensitive Fiber-Optic Refractometer Based on a Core-Diameter-Mismatch Mach–Zehnder Interferometer

A Design of Taper-Like Etched Multicore Fiber Refractive Index-Insensitive a Temperature Highly Sensitive Mach-Zehnder Interferometer

Highly Sensitive Refractive Index Sensor Based on an In-Fiber Droplet-Shape Air-Cavity

High sensitivity of taper-based Mach-Zehnder interferometer embedded in a thinned optical fiber for refractive index sensing.

Ultrasensitive Refractive Index Sensor Based on Enhanced Vernier Effect Through Cascaded Fiber Core-Offset Pairs

High-Sensitivity Refractive Index Sensor Based on a Cascaded Core-Offset and Macrobending Single-Mode Fiber Interferometer

Refractive index and temperature sensor based on Mach-Zehnder interferometer with thin fibers

Temperature-Insensitive Refractive Index Sensor with Etched Microstructure Fiber.

A Simple High-Sensitivity Sensor Based on Multimode Mach-Zehnder Interference for Refractive Index Measurement