Abstract:CH3NH3PbBr3 (MAPbBr(3))-perovskite solar cells (Br-PSCs) have attracted much attention due to their green-long wavelength transparency and high open-circuit voltage originating from their large bandgap (2.2 eV). However, the efficiency of carbon-based Br-PSCs without organic hole transport materials (HTM) is still low due to the inappropriate quality of MAPbBr(3) deposited in a relatively thick porous scaffold. Herein, an amorphous precursor route based on a two-step sequential method is exploited to conformably and seamlessly grow MAPbBr(3) in the TiO2 porous scaffold. In the first step, the amorphous Pb-Br precursor containing a large amount of DMF molecules was prepared by lowering the post-treatment temperature to 25 degrees C, affording full pore filling and smooth surface capping. The conversion to MAPbBr(3) in the second step was accelerated by the molecular exchange between DMF and MABr in IPA solution. Moreover, by solvent engineering through the addition of non-polar cyclohexane into the MABr IPA solution, the molecular exchange process was tuned in such a way to separate the nucleation and growth of MAPbBr(3) crystals, leading to the preferential [001] orientation with an even surface finishing and the subsequent light absorption enhancement and trap state reduction. Using MAPbBr(3) films in carbon-based PSCs has boosted their efficiency to 8.09% (V-oc = 1.35 V), a record value for HTM-free Br-PSCs, also comparable to that of the best HTM-based Br-PSCs. Significantly, non-encapsulated devices showed no efficiency decay after storage in dry air (25-30 degrees C and 10-20% humidity) for 90 days. What is more, the efficiency was retained up to about 90% after storage for 15 days under high heat stress (air, 80 degrees C and 50-85% humidity).

Efficient Planar Perovskite Solar Cells Based On 1.8 Ev Band Gap Ch3nh3pbi2br Nanosheets Via Thermal Decomposition

Phase Engineering of Perovskite Materials for High-Efficiency Solar Cells: Rapid Conversion of CH3NH3PbI3 to Phase-Pure CH3NH3PbCl3 Via Hydrochloric Acid Vapor Annealing Post-Treatment

Pseudohalide-Induced Recrystallization Engineering for CH3NH3PbI3 Film and Its Application in Highly Efficient Inverted Planar Heterojunction Perovskite Solar Cells

Reproducible One-Step Fabrication of Compact MAPbl(3-x)Cl(x) Thin Films Derived from Mixed-Lead-Halide Precursors

An efficient planar-heterojunction solar cell based on wide-bandgap CH3NH3PbI2.1Br0.9 perovskite film for tandem cell application.

High Efficient Planar-Heterojunction Solar Cells Achieved by Using A Smooth Ch3nh3pbi3 Film Via A New Approach of Forming the Pbi2 Nanostructure Together with Strategically High Ch3nh3i Concentration

Efficient Planar Perovskite Solar Cells Using Halide Sr-substituted Pb Perovskite

High-Performance Simple-Structured Planar Heterojunction Perovskite Solar Cells Achieved by Precursor Optimization.

An Amorphous Precursor Route To The Conformable Oriented Crystallization Of Ch3nh3pbbr3 In Mesoporous Scaffolds: Toward Efficient And Thermally Stable Carbon-Based Perovskite Solar Cells

High-performance Planar Heterojunction Perovskite Solar Cells: Preserving Long Charge Carrier Diffusion Lengths and Interfacial Engineering

Direct Conversion of CH3NH3PbI3 from Electrodeposited PbO for Highly Efficient Planar Perovskite Solar Cells

Vacuum-Assisted Thermal Annealing of CH3NH3PbI3 for Highly Stable and Efficient Perovskite Solar Cells

Crystallization and Defect Chemistry Dual Engineering for MAPbI 3 Perovskite Solar Cells with Efficiency Approaching 22%

High‐Performance Planar Solar Cells Based On CH3NH3PbI3‐xClx Perovskites with Determined Chlorine Mole Fraction

CH3NH3PbI3 and CH3NH3PbI3–xClx in Planar or Mesoporous Perovskite Solar Cells: Comprehensive Insight into the Dependence of Performance on Architecture

Growth and Evolution of Solution-Processed CH3NH3PbI3-xClx Layer for Highly Efficient Planar-Heterojunction Perovskite Solar Cells

Optimization of the Photoelectric Properties and Photo-Stability of CH3NH3PbBrXI3-X Films for Efficient Planar Perovskite Solar Cells

Planar Heterojunction Perovskite Solar Cells Via Vapor-Assisted Solution Process

Vacuum Co-Deposited CH3NH3PbI3 Films by Controlling Vapor Pressure for Efficient Planar Perovskite Solar Cells

Ultralow Thermal Conductivity and Ultrahigh Thermal Expansion of Single-Crystal Organic–Inorganic Hybrid Perovskite CH3NH3PbX3 (X = Cl, Br, I)

Novel Planar Heterostructure Perovskite Solar Cells with CdS Nanorods Array As Electron Transport Layer