Abstract:In this article, an in-line Mach-Zehnder interferometer (ILMZI)-based temperature sensor of a sandwich-like composite structure was proposed and experimentally demonstrated. Using simple cleaving and splicing operations, ILMZI was formed by compactly sandwiching a section of four-hole microstructure optical fiber (FHMF) of ultrashort length between two segments of multimode fibers and single-mode fibers in turn. Due to the large thermo-optic coefficient difference between the silica and air modes in FHMF, the sensor achieves a comparable sensitivity of 67.29 pm/degrees C over a wide dynamic range of 20.8 degrees C-100.4 degrees C. Because the sensing area length is only a few hundred micrometers, the long-term stability and anti-interference of the sensor are greatly enhanced. In addition, the large airhole design confines the propagation mode in silica medium by total internal reflection, reducing the interaction between the liquid sample and the sensing element, making the sensor inert to the ambient refractive index. The maximum response deviation of the sensor under microvibration disturbances is 3.51 x 10(-4) nm/degrees C, and the maximum cross-sensitivity under strain disturbances is only 0.0018 degrees C/mu epsilon. The proposed sensor is excellent in performance, easy in fabrication, simple in structure, and low in cost, which can be expected to be used in practical temperature sensing applications without any additional packaging.

A Thermally Annealed Mach-Zehnder Interferometer for High Temperature Measurement.

Highly Sensitive Temperature Sensor Using Intrinsic Mach-Zehnder Interferometer Formed by Bent Micro-Fiber Embedded in Polymer

High Temperature High Sensitivity Mach-Zehnder Interferometer Based on Waist-Enlarged Fiber Bitapers

Fiber Inline Mach-Zehnder Interferometer Fabricated by Fusion Splicing for High Temperature Sensing

Fiber-optic Mach–Zehnder interferometric sensor for high-sensitivity high temperature measurement

Fiber Mach-Zehnder Interferometer Based on Microcavities for High-Temperature Sensing with High Sensitivity.

A Reliable Anti-Interference Temperature Sensor Based on a Four-Hole Microstructure Optical Fiber Mach-Zehnder Interferometer.

High temperature ( up to 950 ° C ) sensor based on 2 micro taper in-line fiber Mach-Zehnder 3 interferometer ( Invited ) 4

High Temperature (up to 950 °C) Sensor Based on Micro Taper In-Line Fiber Mach–Zehnder Interferometer

Fiber Up-Taper Assisted Mach-Zehnder Interferometer for High Sensitive Temperature Sensing

An Anti-Jamming High-Temperature Sensor Based on Optical Fiber In-Line Mach–Zehnder Interferometer Structure

Simultaneous Measurement of Refractive Index and Temperature Using a Mach-Zehnder Interferometer with Forward Core-Cladding-core Recoupling

Temperature and Strain Response of In-Fiber Air-Cavity Fabry-Perot Interferometer under Extreme Temperature Condition

High Sensitivity Temperature Sensor Using Microfiber Based Mach-Zehnder Interferometer

All-solid Multi-Core Fiber-Based Multipath Mach–Zehnder Interferometer for Temperature Sensing

Temperature sensor with enhanced sensitivity based on silicon Mach-Zehnder interferometer with waveguide group index engineering.

An Antiinterference Temperature Sensor Based on Mach-Zehnder Interferometer Using Kagome Hollow-Core Photonic Crystal Fiber

Simultaneous measurement of strain and temperature by employing fiber Mach-Zehnder interferometer.

Strain-Insensitive Optical Fiber Mach-Zehnder Interferometric Temperature Sensor

A Novel Mach–Zehnder Interferometric Temperature Sensor Based on a Symmetrical Double-Grooved Structure

High-temperature sensor based on an abrupt-taper Michelson interferometer in single-mode fiber.