Abstract:A simply fabricated, highly sensitive, and inexpensive optical fiber temperature sensor is reported with a Fabry–Perot (FP) microcavity of controlled length. The microcavity with controllable length is fabricated by single-mode fiber (SMF) and polydimethylsiloxane (PDMS) for temperature sensing. After the PDMS is cured, the SMF is connected to the supercontinuum light source (SCLS) and the optical spectrometer analyzer (OSA) for online observation of the reflection spectrum. The micro-displacement platform is used to pull the SMF to form an air cavity. After the air cavity is stabilized, ultraviolet (UV) activated glue is used for packaging outside the PDMS. The FP microcavity is formed by the end face of the SMF and the face of PDMS. The length of the FP microcavity can be controlled online by the micro-displacement platform to a minimum of 15 µm. The free spectral range (FSR) may reach 74.8 nm and the interference fringe contrast (IFC) is up to 19.8 dB to allow sensitive measurements across a wide temperature range. The experiments demonstrate a high temperature sensitivity of 5.388 nm/°C from 33 to 93 °C with high repeatability and linearity (R2=0.9937). Stability experiments showed that the maximum changes in wavelength and intensity are only 45 pm and 0.035 dB, respectively. It is anticipated that the easily constructed, compact, and inexpensive fiber-optic temperature sensor will be employed in practical applications.

High temperature ( up to 950 ° C ) sensor based on 2 micro taper in-line fiber Mach-Zehnder 3 interferometer ( Invited ) 4

Highly Sensitive Temperature Sensor Using Intrinsic Mach-Zehnder Interferometer Formed by Bent Micro-Fiber Embedded in Polymer

Fiber-optic Mach–Zehnder interferometric sensor for high-sensitivity high temperature measurement

A Reliable Anti-Interference Temperature Sensor Based on a Four-Hole Microstructure Optical Fiber Mach-Zehnder Interferometer.

An Anti-Jamming High-Temperature Sensor Based on Optical Fiber In-Line Mach–Zehnder Interferometer Structure

Temperature sensor with enhanced sensitivity based on silicon Mach-Zehnder interferometer with waveguide group index engineering.

A Zirconia Single-Crystal Fibre-Optic Sensor for Contact Measurement of Temperatures above 2000 °C

High-sensitivity and Large-Range Fiber Optic Temperature Sensor Based on PDMS-coated Mach-Zehnder Interferometer Combined with FBG.

An Improved Y2o3-Zro2 Waveguide-Fiber-Optic Sensor For Measuring Gas Flow Temperature Above 2000 Degrees C

A temperature sensor based on multi-beam capture and interference

A Novel Mach–Zehnder Interferometric Temperature Sensor Based on a Symmetrical Double-Grooved Structure

&Lt;title>improved Y<formula><inf><roman>2</roman></inf></formula>O<formula><inf><roman>3</roman></inf></formula>-ZrO<formula><inf><roman>2</roman></inf></formula> Waveguide Fiber Optic Sensor for Measuring Gas-Flow Temperature above 2000 Degrees Celsius</title>

High-Temperature Sensor Based on Fabry-Perot Interferometer in Microfiber Tip

V-groove all-fiber intermodal Mach-Zehnder interferometer and its high-temperature sensing application

Temperature-insensitive Waveguide Sensor Using a Ring Cascaded with a Mach-Zehnder Interferometer

Simultaneous Measurement of Refractive Index and Temperature Using a Mach-Zehnder Interferometer with Forward Core-Cladding-core Recoupling

An improved Y2O3-ZrO2 waveguide-fiber-optic sensor for measuring gas flow temperature above 2000°C

Large measurement range and high sensitivity temperature sensor with FBG cascaded Mach-Zehnder interferometer

Ultrasensitive Mach-Zehnder Interferometric Temperature Sensor Based on Liquid-Filled D-Shaped Fiber Cavity

Inexpensive optical fiber Fabry–Perot microcavity with controllable length for sensitive temperature measurements

An Antiinterference Temperature Sensor Based on Mach-Zehnder Interferometer Using Kagome Hollow-Core Photonic Crystal Fiber