Abstract:A New Approach to Synthesis Micrometer-sized Porous Silicon Anode for Lithium Ion batteries Haiping Jia, Xiaolin Li, and Ji-Guang Zhang Pacific Northwest National Laboratory, Richland, WA, United States. With the increasing demand on high energy Li-ion batteries (LIBs) for electric vehicles and other large scale energy storage applications, silicon (Si) based composite material has been regarded as one of the most promising candidate to replace the state-of-the-art graphite anodes and can further boost the specific energy of LIBs to be more than 300 Wh/kg. Silicon has the highest practical capacity of 3,579 mAh g-1 and a relatively low lithiation potential of 0.2 V vs. Li/Li+. However, fast capacity fade still largely limits the practical application of Si based anode. A large volume change during lithiation and delithiation processes lead to pulverization and subsequent loss of electrical contact, continuous consumption of electrolyte, repeated breaking/formation of the solid electrolyte interphase (SEI) and an increase in the overall resistance. There has been significant effort to understand and mitigate the capacity fade in Si-based anodes exploiting nanostructured electrodes, surface coatings, additives and novel binders. These advances have paved the way for practical application of Si-based anodes for Li-ion battery applications. Although significant progress has been made, most nanostructured Si materials have to be prepared by high-cost processes (such as chemical vapor deposition) that are difficult to scale up. Therefore, there is an increasing need to prepare Si microparticles (SiMP) with high conductivity and stable structures. In this work, we developed a low-cost and scalable synthesis processes to make desired micronmeter scale SiO2/MWNT spheres. The highly spherical SiO2/MWNT macrobeads ranging from 500 nm to 10 µm in diameter were employed as template and silicon precursor (Figure 1a, b). The as-prepared material basically retains the original morphology of template and demonstrates unique hierarchical structure (Figure 1c, d). The fine primary silicon particles can shorten the Li+ transport route, and avoid the pulverization of SiMP. The obtained silicon composite delivers a reversible capacity of 1290 mAh g-1 at 1C and 87% capacity can be retained after 300 cycles. We attribute this promising cycling stability to the well-designed hierarchical structure, which provides: 1) enough void space to accommodate the volume change so that the swelling of the composite can be minimized; 2) good mechanical structure and electronic conductivity from the MWNT matrix. More details on the synthesis process and electrochemical performance of SiMP will be reported in this report. Figure 1. (a, b) SEM images of microsphere SiO2/MWNT; (c, d) SEM images of the obtained Si/MWNT. Figure 1

Scalable Synthesis of Nano-Silicon from Beach Sand for Long Cycle Life Li-ion Batteries

Scalable and Low-Cost Synthesis of Porous Silicon Nanoparticles As High-Performance Lithium-Ion Battery Anode

Scalable Preparation of Porous Silicon Nanoparticles and Their Application for Lithium-Ion Battery Anodes

Large-scale Fabrication, 3D Tomography, and Lithium-Ion Battery Application of Porous Silicon.

Scalable synthesis of ant-nest-like bulk porous silicon for high-performance lithium-ion battery anodes

Scalable Synthesis of Nano-Si Embedded in Porous C and Its Enhanced Performance As Anode of Li-Ion Batteries

Green, Scalable, and Controllable Fabrication of Nanoporous Silicon from Commercial Alloy Precursors for High-Energy Lithium-Ion Batteries

Scalable synthesis of Si/SiO 2 @C composite from micro-silica particles for high performance lithium battery anodes

A self-driven alloying/dealloying approach to nanostructuring micro-silicon for high-performance lithium-ion battery anodes

Scalable Production of Si Nanoparticles Directly from Low Grade Sources for Lithium-Ion Battery Anode

Scalable Synthesis of Si Nanosheets as Stable Anodes for Practical Lithium-Ion Batteries

Scalable synthesis of interconnected hollow Si/C nanospheres enabled by carbon dioxide in magnesiothermic reduction for high-performance lithium energy storage

Scalable Synthesis of Porous Silicon by Acid Etching of Atomized Al-Si Alloy Powder for Lithium-Ion Batteries

Low-cost and Scalable Preparation of Nano-Si from Photovoltaic Waste Silicon for High-Performance Li-ion Battery Anode

Scalable synthesis of micrometer-sized porous silicon/carbon composites for high-stability lithium-ion battery anodes

Synthesis of 3D stacked silicon nanosheets via electrochemical reduction of attapulgite in molten salt for high-performance lithium-ion batteries anode

Multi-step low-cost synthesis of ultrafine silicon porous structures for high-reversible lithium-ion battery anodes

Solution synthesis of porous silicon particles as an anode material for lithium ion batteries.

A New Approach to Synthesis Micrometer-Sized Porous Silicon Anode for Lithium Ion Batteries

The preparation of mass producible, highly-cycling stable Si/C anode materials with nano-sized silicon crystals embedded in highly amorphous silicon matrix

A Novel Approach to Synthesize Micrometer-Sized Porous Silicon As a High Performance Anode for Lithium-Ion Batteries