Abstract:Efficient and stable electrode materials are urgently required for wastewater treatment in the electrocatalytic degradation of toxic and refractory organic pollutants. Ti3+ self-doping black TiO2 nanotube arrays (Ti/B-TiO2-NTs) as an interlayer were used for preparing a novel PbO2 electrode via an electrochemical reduction technology, and a sodium dodecyl sulfate (SDS)-modified PbO2 catalytic layer was successfully achieved via an electrochemical deposition technology. The physicochemical characterization tests showed that the Ti/B-TiO2-NTs/PbO2-SDS electrodes have a denser surface and finer grain size with the introduction of Ti3+ in the interlayer of Ti/TiO2-NTs and the addition of SDS in the active layer of PbO2. The electrochemical characterization results showed that the Ti3+ self-doping black Ti/TiO2-NTs/PbO2-SDS electrode had higher oxygen evolution potential (2.11 V vs. SCE), higher electrode stability, smaller charge-transfer resistance (6.74 Ω cm−2), and higher hydroxyl radical production activity, leading to it possessing better electrocatalytic properties. The above results indicated that the physicochemical and electrochemical characterization of the PbO2 electrode were all enhanced significantly with the introduction of Ti3+ and SDS. Furthermore, the Ti/B-TiO2-NTs/PbO2-SDS electrodes displayed the best performance on the degradation of methylene blue (MB) in simulated wastewater via bulk electrolysis. The removal efficiency of MB and the chemical oxygen demand (COD) could reach about 99.7% and 80.6% under the optimal conditions after 120 min, respectively. The pseudo-first-order kinetic constant of the Ti/B-TiO2-NTs/PbO2-SDS electrode was 0.03956 min−1, which was approximately 3.18 times faster than that of the Ti/TiO2-NTs/PbO2 electrode (0.01254 min−1). In addition, the Ti/B-TiO2-NTs/PbO2-SDS electrodes showed excellent stability and reusability. The degradation mechanism of MB was explored via the experimental identification of intermediates. In summary, the Ti3+ self-doping black Ti/TiO2-NTs/PbO2-SDS electrode is a promising electrode in treating wastewater.

Effect of Matrix on the Electrochemical Characteristics of TiO2 Nanotube Array-Based PbO2 Electrode for Pollutant Degradation

Fabrication of sulfur-doped TiO2 nanotube array as a conductive interlayer of PbO2 anode for efficient electrochemical oxidation of organic pollutants

Electrochemically Reduced Phytic Acid-Doped TiO2 Nanotubes for the Efficient Electrochemical Degradation of Toxic Pollutants.

Fabrication of Fe2O3/TiO2 Nanotube Electrode and Its Photoelectrocatalytic Performance in Dye Wastewater Degradation

Fabrication of Fe<SUB>2</SUB>O<SUB>3</SUB>/TiO<SUB>2</SUB> Nanotube Electrode and Its Photoelectrocatalytic Performance in Dye Wastewater Degradation

New hierarchical Ti/SnO 2 -PbO 2 /CNT electrode: Enhanced electrochemical properties and improved electrochemical oxidation towards various real wastewaters

Development of SDS-Modified PbO2 Anode Material Based on Ti3+ Self-Doping Black TiO2NTs Substrate as a Conductive Interlayer for Enhanced Electrocatalytic Oxidation of Methylene Blue

Influence of MnOx deposition on TiO2 nanotube arrays for electrooxidation

Fabrication of Fe 2 O 3 /TiO 2 Nanotube Electrode and Its Photoelectrocatalytic Performance in Dye Wastewater Degradation: Fabrication of Fe 2 O 3 /TiO 2 Nanotube Electrode and Its Photoelectrocatalytic Performance in Dye Wastewater Degradation

Preparation of Anatase Tio2/Ti Nanotube-Like Electrodes and Their High Photoelectrocatalytic Activity for the Degradation of Pcp in Aqueous Solution

When MXene (Ti3C2Tx) meet Ti/PbO2: An improved electrocatalytic activity and stability

Performance and doped mechanism of a novel PbO_2 anode

Electrochemical degradation of reverse osmosis concentrate (ROC) using the electrodeposited Ti/TiO2-NTs/PbO2 electrode

Effects of Rare Earth Doping on Structural and Electrocatalytic Properties of Nanostructured TiO2 Nanotubes/SnO2-Sb Electrode for Electrochemical Treatment of Industrial Wastewater

Ti/SnO2–Sb2O5–RuO2/α-PbO2/β-PbO2 Electrodes for Pollutants Degradation

Photoelectrocatalytic Degradation of Organic Contaminants at Bi2O3/TiO2 Nanotube Array Electrode

Fabrication of MnO2/TiO2 nano-tube arrays photoelectrode and its enhanced visible light photoelectrocatalytic performance and mechanism

Promoting the Electrocatalytic Performance of PbO2 Nanocrystals Via Incorporation of Y2O3 Nanoparticles: Degradation Application and Electrocatalytic Mechanism

Defective TiO2 Nanotube Arrays for Efficient Photoelectrochemical Degradation of Organic Pollutants

Stable boron and cobalt co-doped TiO2 nanotubes anode for efficient degradation of organic pollutants

Trace Ti3+- and N-codoped TiO2 Nanotube Array Anode for Significantly Enhanced Electrocatalytic Degradation of Tetracycline and Metronidazole