Abstract:Reverse osmosis concentrate (ROC) from local printing and dyeing mills poses serious environmental health risks. In this study, the Ti/TiO2 nanotubes (TiO2-NTs)/PbO2 electrode was successfully fabricated, and applied to the electrochemical degradation of ROC. For comparison, Ti/TiO2-NTs and Ti/PbO2 electrodes were also fabricated. The characterization of the electrodes revealed that the Ti/TiO2-NTs/PbO2 electrode was completely covered with β-PbO2 particles, and TiO2-NTs gave it large surface area and also restricted the growth of its crystal particles. Electrochemistry tests showed that relative to the other electrodes, the Ti/TiO2-NTs/PbO2 electrode had superior electrochemical properties. Furthermore, the efficiency of the chemical oxygen demand (COD) removal of the three electrodes was in the order: Ti/TiO2-NTs/PbO2 > Ti/PbO2 > Ti/TiO2-NTs. This trend could be attributed to the introduction of the TiO2-NTs, which enhanced electron transport and facilitated the generation of hydroxyl radicals (OH). After the treatment of the ROC sample for 180 min using the Ti/TiO2-NTs/PbO2 electrode, excellent degradation and current efficiencies were realized, alongside a relatively lower energy consumption (0.19 KWh/(g⋅COD)). An increase in both current density and temperature had a positive effect on the performance of this electrode. Importantly, the ROC degradation process which fitted well with pseudo-first-order kinetics was more effective under weakly alkaline conditions. Finally, this electrode retained its COD removal capacity by 47.59%; its morphology was hardly altered, and no Pb(II) was detected in solution even after 10 cycles of continuous use that lasted 90 min.

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is: how to effectively treat reverse osmosis concentrate (ROC) from printing and dyeing plants to reduce its harm to the environment. Specifically, the researchers developed a new type of electrode material - Ti/TiO_2 nanotube/PbO_2 electrode and applied it to the electrochemical degradation process of ROC. By comparing different types of electrodes (such as Ti/TiO_2 nanotube, Ti/PbO_2 electrode), the efficiency and stability of this new electrode in degrading ROC were evaluated, aiming to find an economical and efficient method to treat this high - salinity wastewater containing refractory organic matter and harmful heavy metals, meet the emission standards and reduce the risk of secondary pollution at the same time. ### Research Background - Reverse osmosis technology is widely used in printing and dyeing wastewater treatment, but the generated reverse osmosis concentrate (ROC) accounts for 15 - 20% of the total influent, and has high salinity and a high content of non - biodegradable components. Direct discharge will cause serious harm to the water environment. - Traditional physicochemical methods for treating ROC are costly and prone to generate secondary pollutants, so more effective treatment methods need to be found. ### Research Purposes - Explore the application effect of Ti/TiO_2 nanotube/PbO_2 electrode prepared by electrodeposition method in the electrochemical degradation of ROC. - Evaluate the electrochemical performance and stability of this electrode, especially its chemical oxygen demand (COD) removal efficiency in the process of degrading ROC. - Analyze the factors affecting the degradation effect of ROC, such as current density, initial solution pH value and temperature. ### Main Findings - The Ti/TiO_2 nanotube/PbO_2 electrode shows excellent performance in degrading ROC, and its COD removal efficiency is the highest, reaching 33.37% (within 60 minutes). - The average current efficiency (ACE) and instantaneous current efficiency (ICE) of this electrode are 39.82% and 31.51% respectively, which are significantly higher than those of other electrodes. - Compared with the Ti/PbO_2 electrode, the Ti/TiO_2 nanotube/PbO_2 electrode has lower energy consumption, indicating that it is more economical and feasible in practical applications. - This electrode can still maintain a high COD removal ability after multiple cycles of use, and no Pb(II) dissolution was detected, showing good stability and safety. ### Conclusions - The Ti/TiO_2 nanotube/PbO_2 electrode shows excellent performance in the electrochemical degradation of ROC and is a new electrode material with potential for treating ROC in printing and dyeing plants. - This research provides new ideas and technical support for solving the ROC treatment problem, which is helpful for reducing environmental risks and improving wastewater treatment efficiency.

Electrochemical degradation of reverse osmosis concentrate (ROC) using the electrodeposited Ti/TiO2-NTs/PbO2 electrode

Electrochemical Oxidation of Chemi-Thermo-mechanical Pulping Wastewater

Energy-efficient electrochemical degradation of ciprofloxacin by a Ti-foam/PbO2-GN composite electrode: Electrode characteristics, parameter optimization, and reaction mechanism

Electrochemical oxidation of reverse osmosis concentrates using enhanced TiO2-NTA/SnO2-Sb anodes with/without PbO2 layer

Efficient treatment of printing and dyeing reverse osmosis concentrate by a Ti‐NTA/SnO2‐Sb2O3 electrocatalytic membrane

Electrochemical Treatment of Municipal Reverse Osmosis Concentrates by a Tio2-Bnts/Sno2-Sb Reactive Electrochemical Membrane

Electrochemical treatment of municipal reverse osmosis concentrates by a TiO 2 -BNTs/SnO 2 -Sb reactive electrochemical membrane

Electrochemical oxidation of reverse osmosis concentrates using macroporous Ti-ENTA/SnO2-Sb flow-through anode: Degradation performance, energy efficiency and toxicity assessment

Treatment of reverse-osmosis concentrate of printing and dyeing wastewater by electro-oxidation process with controlled oxidation-reduction potential (ORP)

Electrochemical oxidation of reverse osmosis concentrate using a pilot-scale reactive electrochemical membrane filtration system: Performance and mechanisms

Fabrication of Fe2O3/TiO2 Nanotube Electrode and Its Photoelectrocatalytic Performance in Dye Wastewater Degradation

Efficient desalination and synergistic toxic organics removal in RO concentrates with electrochemical advanced oxidation processes

Performance of electrochemical treatment of refractory organic matter in printing and dyeing reverse osmosis concentrate

Electrochemical oxidation of trace organic contaminants in reverse osmosis concentrate using RuO2/IrO2-coated titanium anodes

Evaluation of diclofenac degradation effect in “active” and “non-active” anodes: A new consideration about mineralization inclination

Efficient Degradation of Phenolic Wastewaters by a Novel Ti/PbO2-Cr-PEDOT Electrode with Enhanced Electrocatalytic Activity and Chemical Stability

Enhanced perfluorooctane acid mineralization by electrochemical oxidation using Ti3+ self-doping TiO2 nanotube arrays anode

Electrochemical oxidation of a typical PPCP wastewater with a novel high-efficiency PbO2 anode based on NCNSs and Ce co-modification: parameter optimization and degradation mechanism

Enhanced treatment of p-nitrophenol and coking wastewater through electrochemical and electrochemical-ozonation coupling process utilizing a novel Ti4O7 reactive electrochemical membrane anode

Development of SDS-Modified PbO2 Anode Material Based on Ti3+ Self-Doping Black TiO2NTs Substrate as a Conductive Interlayer for Enhanced Electrocatalytic Oxidation of Methylene Blue

Electrochemical degradation of refractory pollutants using TiO2 single crystals exposed by high-energy {001} facets.