Fabrication and Application of Flexible Graphene Silk Composite Film Electrodes Decorated with Spiky Pt Nanospheres.

Bo Liang,Lu Fang,Yichuan Hu,Guang Yang,Qin Zhu,Xuesong Ye

DOI: https://doi.org/10.1039/c3nr06057h

IF: 6.7

2014-01-01

Nanoscale

Abstract:A free-standing graphene silk composite film decorated with spiky Pt nanospheres was prepared and utilized in electrochemical sensor applications.

What problem does this paper attempt to address?

Graphene composite coated carbon fiber: electrochemical synthesis and application in electrochemical sensing

Jie Bai,Pengfei Qi,Xiaoteng Ding,Huimin Zhang

DOI: https://doi.org/10.1039/c5ra26620c

IF: 4.036

2016-01-01

RSC Advances

Abstract:A universal method for the fabrication of graphene composite modified carbon fiber is reported.

chemistry, multidisciplinary
Nanoscale Graphene Doped with Highly Dispersed Silver Nanoparticles: Quick Synthesis, Facile Fabrication of 3D Membrane-Modified Electrode, and Super Performance for Electrochemical Sensing

Yang Li,Panpan Zhang,Zhaofei Ouyang,Mingfa Zhang,Zhoujun Lin,Jingfeng Li,Zhiqiang Su,Gang Wei

DOI: https://doi.org/10.1002/adfm.201504533

IF: 19

2016-01-01

Advanced Functional Materials

Abstract:The performance of graphene-based hybrid materials greatly depends on the dispersibility of nanoscale building blocks on graphene sheets. Here, a quick green synthesis of nanoscale graphene (NG) nanosheets decorated with highly dispersed silver nanoparticles (AgNPs) is demonstrated, and then the electrospinning technique to fabricate a novel nanofibrous membrane electrode material is utilized. With this technique, the structure, mechanical stability, biochemical functionality, and other properties of the fabricated membrane electrode material can be easily controlled. It is found that the orientations of NG and the dispersity of AgNPs on the surface of NG have significant effects on the properties of the fabricated electrode. A highly sensitive H2O2 biosensor is thus created based on the as-prepared polymeric NG/AgNP 3D nanofibrous membrane-modified electrode (MME). As a result, the fabricated biosensor has a linear detection range from 0.005 to 47 x 10(-3)m (R = 0.9991) with a supralow detection limit of 0.56 x 10(-6)m (S/N = 3). It is expected that this kind of nanofibrous MME has wider applications for the electrochemical detection and design of 3D functional nanomaterials in the future.
Binary Synergistic Sensitivity Strengthening of Bioinspired Hierarchical Architectures based on Fragmentized Reduced Graphene Oxide Sponge and Silver Nanoparticles for Strain Sensors and Beyond

Zhao Songfang,Guo Lingzhi,Li Jinhui,Li Ning,Zhang Guoping,Gao Yongju,Li Jia,Cao Duxia,Wang Wei,Jin Yufeng,Sun Rong,Wong Ching-Ping

DOI: https://doi.org/10.1002/smll.201700944

IF: 13.3

2017-01-01

Small

Abstract:Recently, stretchable electronics have been highly desirable in the Internet of Things and electronic skins. Herein, an innovative and cost-efficient strategy is demonstrated to fabricate highly sensitive, stretchable, and conductive strain-sensing platforms inspired by the geometries of a spiders slit organ and a lobsters shell. The electrically conductive composites are fabricated via embedding the 3D percolation networks of fragmentized graphene sponges (FGS) in poly(styrene-block-butadiene-block-styrene) (SBS) matrix, followed by an iterative process of silver precursor absorption and reduction. The slit-and scale-like structures and hybrid conductive blocks of FGS and Ag nanoparticles (NPs) provide the obtained FGS-Ag-NP-embedded composites with superior electrical conductivity of 1521 S cm(-1), high break elongation of 680%, a wide sensing range of up to 120% strain, high sensitivity of approximate to 10(7) at a strain of 120%, fast response time of approximate to 20 ms, as well as excellent reliability and stability of 2000 cycles. This huge stretchability and sensitivity is attributed to the combination of high stretchability of SBS and the binary synergistic effects of designed FGS architectures and Ag NPs. Moreover, the FGS/SBS/Ag composites can be employed as wearable sensors to detect the modes of finger motions successfully, and patterned conductive interconnects for flexible arrays of light-emitting diodes.
An Efficient Flexible Electrochemical Glucose Sensor Based on Carbon Nanotubes/carbonized Silk Fabrics Decorated with Pt Microspheres

Chao Chen,Rui Ran,Zhiyu Yang,Ruitao Lv,Wanci Shen,Feiyu Kang,Zheng-Hong Huang

DOI: https://doi.org/10.1016/j.snb.2017.10.067

2018-01-01

Abstract:Advanced flexible electronics have been attracting increasing attention nowadays. Herein, we fabricated an efficient flexible glucose sensor based on multi-walled carbon nanotubes coated carbonized silk fabric (MWCNTs/CSF) by Pt microsphere decoration. The MWCNTs/CSF was obtained by carbonization at 950 degrees C under an inert atmosphere, which showed good conductivity, flexibility and stability. After a decoration of Pt microspheres by electrodeposition, the resultant material showed a good sensitivity towards H2O2. Following with immobilizing with glucose oxidase (GOx), the resultant sensor showed a sensitivity of 288.86 mu A mM(-1) cm(-2) with a good linear range from 0 to 5 mM. This method is considered to be an efficient way to fabricate flexible electrodes and wearable electronic devices. (C) 2017 Elsevier B.V. All rights reserved.
Graphene/polyaniline woven fabric composite films as flexible supercapacitor electrodes

Xiaobei Zang,Xiao Li,Miao Zhu,Xinming Li,Zhen Zhen,Yijia He,Kunlin Wang,Jinquan Wei,Feiyu Kang,Hongwei Zhu

DOI: https://doi.org/10.1039/c5nr00584a

IF: 6.7

2015-01-01

Nanoscale

Abstract:We report the design and preparation of graphene and polyaniline (PANI) woven-fabric composite films by in situ electropolymerization. The introduction of PANI greatly improves the electrochemical properties of solid-state supercapacitors which possess capacitances as high as 23 mF cm(-2), and exhibit excellent cycling stability with similar to 100% capacitance retention after 2000 cycles. The devices have displayed superior flexibility with improved areal specific capacitances to 118% during deformation.
In Situ Growth of Nanosilver on Fabric for Flexible Stretchable Electrodes

Qingwei Liao,Yuxiang Yin,Jingxin Zhang,Wei Si,Wei Hou,Lei Qin

DOI: https://doi.org/10.3390/ijms232113236

2022-10-31

Abstract:Flexible sensing can disruptively change the physical form of traditional electronic devices to achieve flexibility in information acquisition, processing, transmission, display, and even energy, and it is a core technology for a new generation of the industrial internet. Fabric is naturally flexible and stretchable, and its knitted ability makes it flexibility and stretchability even more adjustable. However, fabric needs to be electrically conductive to be used for flexible sensing, which allows it to carry a variety of circuits. The dip-coating technique is a common method for preparing conductive fabrics, which are made conductive by attaching conductive fillers to the fabrics. However, the adhesion of the conductive fillers on the surface of such conductive fabrics is weak, and the conductive property will decay rapidly because the conductive filler falls off after repeated stretching, limiting the lifespan of flexible electronic devices based on conductive fabric. We chose multifunctional nanosilver as a conductive filler, and we increased the adhesion of nanosilver to fabric fiber by making nanosilver grow in situ and cover the fiber, so as to obtain conductive fabric with good conductivity. This conductive fabric has a minimum square resistance of 9 Ω/sq and has better electrical conductivity and more stable electrical properties than the conductive fabric prepared using the dip-coating process, and its square resistance did not increase significantlyafter 60 stretches.
One-step fabrication of high-performance graphene composites from graphite solution for bio-scaffolds and flexible strain sensors

Hang Yu,Qibin Zhuang,Jiawei Lin,Zhuo Chen,Zhiwen Chen,Zhongbao Wang,Gang Zhou,Shaohua Zhang,Yingzhen Lai,Dezhi Wu

DOI: https://doi.org/10.1088/1361-6528/acd1f4

IF: 3.5

2023-05-17

Nanotechnology

Abstract:Graphene composites possess great application potential in various fields including flexible electrodes, wearable sensors and biomedical devices owing to their excellent mechanical and electrical properties. However, it remains challenging to fabricate graphene composites-based devices with high consistency due to the gradual aggression effect of graphene during fabrication process. Herein, we propose a method for one-step fabricating graphene/polymer composite-based devices from graphite/polymer solution by using electrohydrodynamic (EHD) printing with the Weissenberg effect (EPWE). Taylor-Couette flows with high shearing speed were generated to exfoliate high-quality graphene with a rotating steel microneedle coaxially set in a spinneret tube. The effects of the rotating speed of the needle, spinneret size and precursor ingredients on the graphene concentration were discussed. As a proof of concept, EPWE was used to successfully fabricate graphene/polycaprolactone (PCL) bio-scaffolds with good biocompatibility and graphene/thermoplastic polyurethane strain sensor for detecting human motions with a maximum gauge factor more than 2400 from 40% to 50% strain. As such, this method sheds a new light on one-stepin situfabrication of graphene/polymer composite-based devices from graphite solution with low cost.
Innovative Graphene-Based Nanocomposites for Improvement of Electrochemical Sensors: Synthesis, Characterization, and Applications

Untika Pengsomjit,Fatima Alabdo,Chanpen Karuwan,Charoenkwan Kraiya,Waleed Alahmad,Sibel A. Ozkan

DOI: https://doi.org/10.1080/10408347.2024.2343854

2024-04-26

Critical Reviews in Analytical Chemistry

Abstract:Graphene, renowned for its exceptional physicochemical attributes, has emerged as a favored substrate for integrating a wide array of inorganic and organic materials in scientific endeavors and innovations. Electrochemical graphene-based nanocomposite sensors have been developed by incorporating diverse nanoparticles into graphene, effectively immobilized onto electrodes through various techniques. These graphene-based nanocomposite sensors have effectively detected and quantified various electroactive species in samples. This review delves into using graphene nanocomposites to fabricate electrochemical sensors, leveraging the exceptional electrical, mechanical, and thermal properties inherent to graphene derivatives. These nanocomposites showcase electrocatalytic activity, substantial surface area, superior electrical conductivity, adsorption capabilities, and notable porosity, which are highly advantageous for sensing applications. A myriad of characterization techniques, including Raman spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), BET surface area analysis, and X-ray diffraction (XRD), have proven effective in exploring the properties of graphene nanocomposites and validating the adjustable formation of these nanomaterials with graphene. The applicability of these sensors across various matrices, encompassing environmental, food, and biological domains, has been evaluated through electrochemical measurements, such as cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and differential pulse voltammetry (DPV). This review provides a comprehensive overview of synthesis methods, characterization techniques, and sensor applications pertinent to graphene-based nanocomposites. Furthermore, it deliberates on the challenges and future prospects within this burgeoning field.

chemistry, analytical
Electrospinning Silk Fibroin/Graphene Nanofiber Membrane Used for 3D Wearable Pressure Sensor

Zulan Liu,Jiaxuan Wang,Qian Zhang,Zheng Li,Zhi Li,Lan Cheng,Fangyin Dai

DOI: https://doi.org/10.3390/polym14183875

IF: 5

2022-09-17

Polymers

Abstract:With the improvement of science and technology, flexible sensors have become a hot research topic. Flexible sensors have broad application in human health detection and motion detection and other fields. In this paper, the silk fibroin/graphene nanofiber membranes were prepared by double needle electrospinning. In addition, the high sensitivity of the three-dimensional composite hierarchy was obtained by superimposing a monolayer silk fibroin/graphene nanofiber membrane, which was prepared via double needle electrospinning. In addition, the three-dimensional hierarchy was encapsulated by polydimethylsiloxane to prepare a pressure sensor. The sensitivity of the pressure sensor can achieve 7.7 Pa−1. In addition, this pressure sensor has excellent durability (>2000 cycles) and shorter response times (490 ms), which has broad research prospects in human health detection and motion detection.

polymer science
Multifunctional Graphene-Based Composite Sponge

Xu Cui,Jiayu Tian,Yin Yu,Aron Chand,Shuocheng Zhang,Qingshi Meng,Xiaodong Li,Shuo Wang

DOI: https://doi.org/10.3390/s20020329

IF: 3.9

2020-01-07

Sensors

Abstract:Although graphene has been widely used as a nano-filler to enhance the conductivity of porous materials, it is still an unsatisfactory requirement to prepare graphene-based sponge porous materials by simple and low-cost methods to enhance their mechanical properties and make them have good sensing and capacitive properties. Graphene platelets (GnPs) were prepared by the thermal expansion method. Graphene-based sponge porous materials were prepared by a simple method. A flexible sensor was formed and supercapacitors were assembled. Compared with other graphene-based composites, the graphene-based composite sponge has good electrical response under bending and torsion loading. Under 180° bending and torsion loading, the maximum resistance change rate can reach 13.9% and 52.5%, respectively. The linearity under tension is 0.01. The mechanical properties and capacitance properties of the sponge nanocomposites were optimized when the filler fraction was 1.43 wt.%. The tensile strength was 0.236 MPa and capacitance was 21.4 F/g. In cycles, the capacitance retention rate is 94.45%. The experimental results show that the graphene-based sponge porous material can be used as a multifunctional flexible sensor and supercapacitor, and it is a promising and multifunctional porous nanocomposite material.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Fabrication of graphene/poly(ethyl 2-cyanoacrylate) composite electrode for amperometric detection in capillary electrophoresis

Junchao Xu,Luyan Zhang,Gang Chen

DOI: https://doi.org/10.1016/j.snb.2013.03.109

2013-01-01

Abstract:This report describes the development and application of a novel graphene/poly(ethyl 2-cyanoacrylate) composite electrode as a sensitive amperometric detector of capillary electrophoresis. The composite electrode was fabricated on the basis of the in situ polymerization of a mixture of graphene and ethyl 2-cyanoacrylate in the microchannel of a piece of fused silica capillary under heat. The structure of the material was investigated by scanning electron microscopy, X-ray diffraction, thermogravimetric analysis, and infrared spectroscopy. The results indicated that graphene sheets were well dispersed and interconnected throughout the composite to form a conductive network. The performance of this unique detector was demonstrated by separating and detecting five naturally occurring phenolic compounds in combination with capillary electrophoresis. The graphene-based detector offered significantly lower operating potentials, substantially enhanced signal-to-noise characteristics, and lower expense of operation, indicate great promise for microchip capillary electrophoresis, flowing injection analysis, and other microfluidic analysis systems.
Multifunctional, durable and highly conductive graphene/sponge nanocomposites

Qingshi Meng,Yin Yu,Jiayu Tian,Zhaokun Yang,Shuang Guo,Rui Cai,Sensen Han,Tianqing Liu,Jun Ma

DOI: https://doi.org/10.1088/1361-6528/ab9f73

IF: 3.5

2020-09-02

Nanotechnology

Abstract:Porous functional materials play important roles in a wide variety of growing research and industrial fields. We herein report a simple, effective method to prepare porous functional graphene composites for multi-field applications. Graphene sheets were non-chemically modified by Triton®X-100, not only to maintain high structural integrity but to improve the dispersion of graphene on the pore surface of a sponge. It was found that a graphene/sponge nanocomposite at 0.79 wt.% demonstrated ideal electrical conductivity. The composite materials have high strain sensitivity, stable fatigue performance for 20 000 cycles, short response time of 0.401 s and fast response to temperature and pressure. In addition, the composites are effective in monitoring materials deformation and acoustic attenuation with a maximum absorption rate 67.78% and it can be used as electrodes for a supercapacitor with capacitance of 18.1 F g−1. Moreover, no expensive materials or complex equipment are required for the composite manufacturing process. This new methodology for the fabrication of multifunctional, durable and highly conductive graphene/sponge nanocomposites hold promise for many other applications.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology
Modified screen-printed electrode using graphene ink for electrochemical sensor application

I Anshori,S Harimurti,L N Rizalputri,M S Hartono,R R Althof,M Handayani,Tati L E R Mengko,B Yuliarto

DOI: https://doi.org/10.1088/1742-6596/1912/1/012022

2021-05-01

Journal of Physics: Conference Series

Abstract:Abstract In lab-on-chip development, screen printed electrode (SPE) method is usually utilized as an electrochemical sensor. As a basic conductive material, carbon has several advantages compared to other conductive materials. SPE performance can be enhanced by using a nanomaterial due to its unique properties, such as its small size particle and large surface area that can accelerate the electron transfer on the surface of the electrode. Graphene as a carbon-based nanomaterial is an extraordinary material to work with because of its good electrical conductivity and large specific surface area. In this work, we developed a graphene paste from the water-based graphene ink with the addition of polyurethane binder material to realize a nanocarbon conductive paste, which insoluble in water and other electrolytes. Our graphene paste was deposited on the working electrode area of SPE and the performance was tested using cyclic voltammetry method. The result showed that the optimal ratio for the graphene carbon paste, polyurethane to graphene ink, was 1:15 %vol. With this ratio, the performance of the modified SPE could successfully be increased and it also showed a stable sensing performance by having a low error value, below 3%, for 7 times of repeated measurements.
Electrochemical Sensors Fabricated by Electrospinning Technology: An Overview

Ke Chen,Weimin Chou,Lichao Liu,Yonghui Cui,Ping Xue,Mingyin Jia

DOI: https://doi.org/10.3390/s19173676

IF: 3.9

2019-08-23

Sensors

Abstract:Nanofibers or nanofibrous membranes prepared by electrospinning possess many attractive properties, including excellent mechanical properties, high specific surface area and high porosity, making them attractive for sensor application, especially for the electrochemical sensors. Many nanomaterials are used as additives to improve the conductivity, sensitivity and selectivity of sensors. Based on the different modifiers of electrode materials, electrochemical sensors can be divided into enzyme sensors and non-enzyme sensors. In this review, we summarize the recent progress of the electrochemical sensors fabricated by electrospinning, including hydrogen peroxide (H2O2) sensors, glucose sensors and other sensors. In addition, the sensing mechanisms of various electrochemical sensors are introduced in detail. Finally, future research directions of electrochemical sensors based on electrospinning and the challenges faced by large-scale applications of electrospun electrochemical sensors are presented.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Spinning Fabrication of Graphene/Polypyrrole Composite Fibers for All-Solid-State, Flexible Fibriform Supercapacitors

Xiaoteng Ding,Yang Zhao,Chuangang Hu,Yue Hu,Zelin Dong,Nan Chen,Zhipan Zhang,Liangti Qu

DOI: https://doi.org/10.1039/c4ta01230e

IF: 11.9

2014-01-01

Journal of Materials Chemistry A

Abstract:We have developed a facile and straightforward approach for the continuous fabrication of graphene/polypyrrole (G/PPy) composite fibers via a wet-spinning strategy. The diameter of G/PPy fibers can be well-controlled in the range of about 15–80 μm. Furthermore, the fiber possesses high conductivity and mechanical flexibility, thus offering significant advantages as flexible, lightweight electrodes for an efficient fiber-based electrochemical supercapacitor. The all-solid-state fiber supercapacitor with H2SO4–polyvinyl alcohol (H2SO4–PVA) gel electrolyte has been demonstrated, which could be woven into a textile for wearable electronics.
Direct Writing of Liquid Metal onto an Electrospun Graphene Oxide Composite Polymer Nanofiber Membrane for Robust and Stretchable Electrodes

Yi‐Gen Wu,Zhong‐Bao Wang,Jin‐Bin Xu,Zhuo Chen,Guo‐Long Zeng,Zhen‐Jin Xu,Jia‐Hong Zhou,Xin‐Qi Chen,Qiu‐Lin Tan,Qin‐Nan Chen,Yang Yang,Song‐Yue Chen,Ling‐Yun Wang,De‐Zhi Wu

DOI: https://doi.org/10.1002/admt.202201935

IF: 6.8

2023-01-30

Advanced Materials Technologies

Abstract:A facile method is used to construct robust and stretchable electrodes by direct‐written liquid metal onto electrospun graphene oxide/thermoplastic polyurethane composite nanofiber membrane contributing from the improved interfacial force between the liquid metal oxide layer and predeposited interface bonding layer possessing rich –OH. Highly stretchable electrodes with electrically robust behavior are critical for wide applications of soft robots, electronic skins, and flexible sensors. However, it remains challenging to fabricate such electrodes with traditional fabrication methods, such as lithography, conductive composite material synthetization, stencil printing, and microchannel injection. Here, a facile method is proposed to construct robust and stretchable electrodes by direct‐written liquid metal (LM) onto a predeposited interface bonding layer, which greatly improves the interfacial force between the LM and substrate. An electrospun graphene oxide/thermoplastic polyurethane composite nanofiber membrane is used as the bonding layer, which provides rich –OH on the interface and in situ forming of hydrogen bond (H‐bond) with the LM oxide layer. A prototype electrode shows stretchability of 580%. The resistance remains stable that varies from 2.8 to 19.3 Ω at 500% elongation, and varies slightly after 7500 stretching cycles under 50% elongation, from 2.6–4.0 to 4.4–6.4 Ω. The fabrication technique is demonstrated with applications in stretchable circuit board assemblies and stretchable electronic cables, indicating a potential effective method for fabricating high‐performance stretchable electrodes.

materials science, multidisciplinary
Environmentally Responsive Composite Films Fabricated Using Silk Nanofibrils and Silver Nanowires

Jialin Liu,Tengyu He,Guangqiang Fang,Ranran Wang,Elbadawy A. Kamoun,Jinrong Yao,Zhengzhong Shao,Xin Chen

DOI: https://doi.org/10.1039/c8tc04549f

IF: 6.4

2018-01-01

Journal of Materials Chemistry C

Abstract:Two kinds of silk nanofibril/silver nanowire composite films were fabricated by using a facile vacuum-filtration method, and can act as a humidity sensor or a pressure sensor.
Sheath-Core Graphite/Silk Fiber Made by Dry-Meyer-Rod-Coating for Wearable Strain Sensors.

Mingchao Zhang,Chunya Wang,Qi Wang,Muqiang Jian,Yingying Zhang

DOI: https://doi.org/10.1021/acsami.6b06984

IF: 9.5

2016-01-01

ACS Applied Materials & Interfaces

Abstract:Recent years have witnessed the explosive development of flexible strain sensors. Nanomaterials have been widely utilized to fabricate flexible strain sensors, because of their high flexibility and electrical conductivity. However, the fabrication processes for nanomaterials and the subsequent strain sensors are generally complicated and are manufactured at high cost. In this work, we developed a facile dry-Meyer-rod-coating process to fabricate sheath-core-structured single-fiber strain sensors using ultrafine graphite flakes as the sheath and silk fibers as the core by virtue of their flexibility, high production, and low cost. The fabricated strain sensor exhibits a high sensitivity with a gauge factor of 14.5 within wide workable strain range up to 15%, and outstanding stability (up to 3000 cycles). The single-fiber-based strain sensors could be attached to a human body to detect joint motions or easily integrated into the multidirectional strain sensor for monitoring multiaxial strain, showing great potential applications as wearable strain sensors.
Graphene composite paper synergized with micro/nanocellulose-fiber and silk fibroin for flexible strain sensor

Jun Li,Fei Yang,Dongyan Liu,Sensen Han,Junsheng Li,Guoxin Sui

DOI: https://doi.org/10.1016/j.ijbiomac.2023.124439

IF: 8.2

2023-04-19

International Journal of Biological Macromolecules

Abstract:The fabrication of uniform and strong graphene-based conductive paper is challenging due to easy aggregation and poor film formability of graphene. Herein, on the basis of good dispersing effect of nanocellulose, high content graphene (50 wt%) composite paper with micro/nanocellulose fibers and silk fibroin (SF) was manufactured via simple casting method. The synergistic effects of cellulose microfibers (CMFs), cellulose nanofibers (CNFs) and SF result in the paper with ideal combination of flexibility, electrical conductivity and mechanical strength, where CNFs, CMFs and SF act as dispersing and film forming for GNPs, dimensional stability, and interfacial binding agents, respectively. Extraordinarily, by adding SF, graphene nanosheets are tightly coated on the surface of CMFs. The composite paper shows a tensile strength of 49.29 MPa, surface resistance of 39.0–42.1 Ω and good joints bend sensing performance. Additionally, it is found that CMFs can hinder the micro-cracks from propagating during the cyclic elbow bending test. The graphene-based conductive paper is helpful for the development of smart clothing wearable biosensing devices.

polymer science,biochemistry & molecular biology,chemistry, applied
Fabrication and Electrochemical Properties of Free-Standing Single-Walled Carbon Nanotube Film Electrodes

Niu Zhi-Qiang,Ma Wen-Jun,Dong Hai-Bo,Li Jin-Zhu,Zhou Wei-Ya

DOI: https://doi.org/10.1088/1674-1056/20/2/028101

2011-01-01

Abstract:An easily manipulative approach was presented to fabricate electrodes using free-standing single-walled carbon nanotube （SWCNT） films grown directly by chemical vapor deposition.Electrochemical properties of the electrodes were investigated.In comparison with the post-deposited SWCNT papers,the directly grown SWCNT film electrodes manifested enhanced electrochemical properties and sensitivity of sensors as well as excellent electrocatalytic activities.A transition from macroelectrode to nanoelectrode behaviours was observed with the increase of scan rate.The heat treatment of the SWCNT film electrodes increased the current signals of electrochemical analyser and background current,because the heat-treatment of the SWCNTs in air could create more oxide defects on the walls of the SWCNTs and make the surfaces of SWCNTs more hydrophilic.The excellent electrochemical properties of the directly grown and heat-treated free-standing SWCNT film electrodes show the potentials in biological and electrocatalytic applications.

Fabrication and Application of Flexible Graphene Silk Composite Film Electrodes Decorated with Spiky Pt Nanospheres.

Graphene composite coated carbon fiber: electrochemical synthesis and application in electrochemical sensing

Nanoscale Graphene Doped with Highly Dispersed Silver Nanoparticles: Quick Synthesis, Facile Fabrication of 3D Membrane-Modified Electrode, and Super Performance for Electrochemical Sensing

Binary Synergistic Sensitivity Strengthening of Bioinspired Hierarchical Architectures based on Fragmentized Reduced Graphene Oxide Sponge and Silver Nanoparticles for Strain Sensors and Beyond

An Efficient Flexible Electrochemical Glucose Sensor Based on Carbon Nanotubes/carbonized Silk Fabrics Decorated with Pt Microspheres

Graphene/polyaniline woven fabric composite films as flexible supercapacitor electrodes

In Situ Growth of Nanosilver on Fabric for Flexible Stretchable Electrodes

One-step fabrication of high-performance graphene composites from graphite solution for bio-scaffolds and flexible strain sensors

Innovative Graphene-Based Nanocomposites for Improvement of Electrochemical Sensors: Synthesis, Characterization, and Applications

Electrospinning Silk Fibroin/Graphene Nanofiber Membrane Used for 3D Wearable Pressure Sensor

Multifunctional Graphene-Based Composite Sponge

Fabrication of graphene/poly(ethyl 2-cyanoacrylate) composite electrode for amperometric detection in capillary electrophoresis

Multifunctional, durable and highly conductive graphene/sponge nanocomposites

Modified screen-printed electrode using graphene ink for electrochemical sensor application

Electrochemical Sensors Fabricated by Electrospinning Technology: An Overview

Spinning Fabrication of Graphene/Polypyrrole Composite Fibers for All-Solid-State, Flexible Fibriform Supercapacitors

Direct Writing of Liquid Metal onto an Electrospun Graphene Oxide Composite Polymer Nanofiber Membrane for Robust and Stretchable Electrodes

Environmentally Responsive Composite Films Fabricated Using Silk Nanofibrils and Silver Nanowires

Sheath-Core Graphite/Silk Fiber Made by Dry-Meyer-Rod-Coating for Wearable Strain Sensors.

Graphene composite paper synergized with micro/nanocellulose-fiber and silk fibroin for flexible strain sensor

Fabrication and Electrochemical Properties of Free-Standing Single-Walled Carbon Nanotube Film Electrodes