Abstract:In this paper, a respiration sensor based on anti-resonant reflecting effect is proposed and successfully manufactured. The sensor consists of a section of hollow core photonic crystal fiber (PCF) spliced between single mode fibers. One of the cladding air holes is filled with liquid to create the anti-resonant effect. The moisture from human breath can condense on the outer surface of the hollow core photonic crystal fiber, which affects the anti-resonant reflecting guidance property of the waveguide. The breath pattern can be monitored by tracing the change of transmitted intensities. A wearable solution is provided by attaching the sensor head to a facial mask, and breath dynamic characteristics is collected and converted to electronic signals. The sensor device is used to monitor the breath condition of different volunteers during a variety of physiological activities. The sensor presents a rapid response time of 47 ms and recovery time of 63 ms. The Peak expiratory flow (PEF) of the breathing process can also be measured with the sensor, since which has a linear relationship with the output voltage. On the other hand, the sensor is capable of measuring temperature change simultaneously. The resonant wavelength exhibts blueshift as temperature rises, and the temperature sensitivity is about -0.16 nm/°C. The sensor is light weight, cost effective, and is suitable for monitoring patients during certain medical procedures, such as magnetic resonance imaging scan, where electronic sensors are not suitable.

Noninvasive Respiration Movement Sensor Based on Distributed Bragg Reflector Fiber Laser with Beat Frequency Interrogation.

Optical Active Fiber Sensing Technique Based on the Lasing Wavelength Demodulation for Monitoring the Human Respiration and Pulse

Respiration monitoring using antiresonant reflecting guidance in selectively infiltrated hollow core photonic crystal fiber

Non-intrusive respiratory monitoring system using Fiber Bragg Grating sensor

Ultra-short DBR Fiber Laser Based Sensor for Arterial Pulse Monitoring

In-Fiber Breathing Monitoring Sensor by Micro-Tapered Long-Period Grating Structure

Wearable Optical Fiber Sensor Based on a Bend Singlemode-Multimode-Singlemode Fiber Structure for Respiration Monitoring

Optical Fiber Sensor for Wearable and Accurate Human Respiratory Monitoring

Low-Cost Wearable Sensor Based on a D-Shaped Plastic Optical Fiber for Respiration Monitoring

A Wearable Breath Sensor Based on Fiber-Tip Microcantilever.

In-bed Fibre Optic Breathing and Movement Sensor for Non-Intrusive Monitoring

In-fiber Mach-Zehnder interferometer for wearable respiration measurement

Novel pressure sensor based on distributed Bragg reflector (DBR) fiber laser

Fiber laser sensor with beat frequency demodulation

Fiber Optic Non-Wearable Respiratory Monitoring Based on In-Line Modal Interferometer

Medical Respiratory Monitoring Sensors Based on Microbend Fiber Loss

Real-Time Monitoring of Human Breathing Using Wearable Tilted Fiber Grating Curvature Sensors

A simple optical fiber interferometer based breathing sensor

Polarimetric Multilongitudinal‐mode Distributed Bragg Reflector Fiber Laser Sensor for Strain Measurement

Fiber-Optic Anemometer Based on Distributed Bragg Reflector Fiber Laser Technology

Optical Fiber Microvibration Sensor Design for Wearable Multi-Point Breathing Monitoring