Abstract:The indicators of respiratory rate (RespRate), heart rate (HR), and arterial pulse waveform (APW) directly reflect human health levels. Therefore, it is crucial to monitor these indicators. This article introduces a parallel waveguide fiber Bragg grating (PWFBG) sensor capable of measuring respiratory rate and either trunk bending or pulse, and estimating HR based on the measured pulse. Traditional measurement methods require separate sensors for each parameter, leading to increased complexity and cost. We used femtosecond (fs) laser to inscribe a coupling waveguide in a single-mode fiber (SMF), and then inscribed two Fiber Bragg Gratings (FBGs) with different center wavelengths in the fiber core and waveguide respectively, to create the PWFBG structure. To reduce demodulation costs, we made the two FBGs corresponding to the sensor into filters. By using the edge filtering method, we achieved intensity demodulation of the sensor. Finally, the PWFBG structure is encapsulated in polydimethylsiloxane (PDMS) and fixed on the human chest or neck to measure respiratory rate and the degree of trunk bending or pulse. Experimental measurements show that the proposed sensor structure is highly sensitive to human respiration and pulse, and can also assess the degree of trunk bending. In tests, volunteers' heart rates were 84 bpm at rest, 12 bpm after exercise, and 104 bpm after resting, with results comparing favorably with commercial instruments, falling within the ± 1.96 SD range, demonstrating the sensor's accuracy. Additionally, the core FBG and waveguide FBG have similar temperature responses (17 pm/°C and 18.1 pm/°C respectively), allowing the core FBG to compensate for the temperature changes affecting the waveguide FBG. This sensor has significant potential for health monitoring, health management, and biological research, especially in high magnetic field environments like magnetic resonance imaging (MRI).

Optical Active Fiber Sensing Technique Based on the Lasing Wavelength Demodulation for Monitoring the Human Respiration and Pulse

A Multifunctional Skin-Like Wearable Optical Sensor Based On An Optical Micro-/Nanofibre

Wearable Optical Fiber Sensor Based on a Bend Singlemode-Multimode-Singlemode Fiber Structure for Respiration Monitoring

The Experimental Research on Mimetic Optical Artificial Nose Sensor System and Detection of Respiration Odor

Single Optical Microfiber Enabled Tactile Sensor for Simultaneous Temperature and Pressure Measurement

In-Fiber Breathing Monitoring Sensor by Micro-Tapered Long-Period Grating Structure

Respiration monitoring using antiresonant reflecting guidance in selectively infiltrated hollow core photonic crystal fiber

An Optical Micro/Nano Fiber Sensor for Monitoring Respiration

Low-Cost Wearable Sensor Based on a D-Shaped Plastic Optical Fiber for Respiration Monitoring

Diaphragm‐based optical fiber sensor for pulse wave monitoring and cardiovascular diseases diagnosis

Parallel waveguide fiber Bragg gratings – Used for detecting human respiratory rate, trunk status, and pulse

Fabrication and application of a grooved optical fiber respiratory sensor based on geometric parameter optimization by optical simulation

Wearable respiratory sensor based on Mach-Zehnder interferometer in seven-core fiber

In-fiber Mach-Zehnder interferometer for wearable respiration measurement

Helical long period fiber grating sensor for non-invasive measurement of vital signs

Fabrication and evaluation of a notched polymer optical fiber fabric strain sensor and its application in human respiration monitoring

Blood Oxygenation and Flow Measurements Using a Single 720-Nm Tunable V-cavity Laser.

Design and Experiment of an Optical Fiber Micro Bend Sensor for Respiration Monitoring

MXene-Based Fiber-Optic Humidity Sensor for Fast Human Breath Monitoring

[Neuromodulators in otorhinolaryngology].

Sensitive and Wearable Optical Microfiber Sensor for Human Health Monitoring