Abstract:Photoelectrochemical water splitting, consisting of photoanode and photocathode used for water reduction and oxidation, is a potential route to store the solar energy into chemical fuels. In terms of the required earth abundance, cheapness and proper band gap edges (1.12 eV), silicon is an attractive photoelectrode material. Unfortunately, silicon suffered from the instability and low efficiency due to the severe photocorrosion and passivation in the reaction electrolyte, even though limited performance has been achieved for water splitting development. [1-3]. In this work, in order to enhance the stability and photoelectrochemical efficiency, we fabricated silicon-based sandwich photoelectrodes with mediated protection layer of sputtered Molybdenum thin film, which is covered with hand-sprayed MoS2 as the catalyst, as shown in the fig. 1(a). The samples are marked with a, b, c and d separately after different thermal annealing time of 0h, 1h, 2h, 3h in the static Nitrogen atmosphere. After proper annealing, the formed nanoporous surficial structure could be observed in the SEM images (fig. 1(b)) with pore diameters ranging from 10 to 50 nm. These porous networks offer much more active sites for water splitting. The effect of annealing temperature on optical response is shown in fig. 2(a). The UV-Vis spectra show that the annealed surficial MoS2 exhibits extended optical responses to the longer wavelength region, indicating the potential enhanced visible light absorption. What’s more, in the photoluminescence (PL) spectra (Fig. 2(b)), the weaker PL intensity are observed after covering MoS2 on the top surface of Mo and essential annealing process, suggesting the suppressed recommendation of the photoexcited electrons and holes in the interface and therefore improved solar energy conversion. In conclusion, the silicon-based sandwich photoelectrode with enhanced visible light absorption and conversion is fabricated through facile processes. This novel low-cost silicon-based photoelectrode possess potential enhanced efficiency and stability applied in the photoelectrochemical water splitting system. Acknowledgments: The authors gratefully acknowledge the financial support from Norwegian Research Council FRINATEK programme (231416/F20), and China Scholarship Council (CSC, Grant No.201506930002). The Research Council of Norway is acknowledged for the support to the NorFab, project number 245963/F50. References [1] M. J. Kenney, M. Gong, Y. Li, J. Z. Wu, J. Feng, M. Lanza, H. Dai, Science, 343 (6160), 836-840 (2013). [2] S. Hu, M. R. Shaner, J. A. Beardslee, M. Lichterman, B. S. Brunschwig, N. S. Lewis, Science, 344 (6187), 1005-1009 (2014). [3] J. Feng, M. Gong, M. J. Kenney, J., Z. Wu, B. Zhang, Y. Li, H. Dai, Nano Res., 8 (5), 1577–1583 (2015). Figure 1

High-Performance Silicon Photoanodes Passivated with Ultrathin Nickel Films for Water Oxidation

Nickel-coated Silicon Photocathode for Water Splitting in Alkaline Electrolytes

Stabilization of Silicon Photoanode By Hafnium Zirconium Oxide Interlayer for Efficient Solar Water Oxidation

Silicon Photoanode Modified with Work-function-tuned Ni@FeyNi1-y(OH)2 Core-Shell Particles for Water Oxidation.

Highly Efficient NiFe Nanoparticle Decorated Si Photoanode for Photoelectrochemical Water Oxidation

Silicon Photoanodes Partially Covered by Ni@Ni(Oh)(2) Core-Shell Particles for Photoelectrochemical Water Oxidation

High Performance P-Si/ni3s2 Photocathode for Photoelectrochemical Hydrogen Evolution in Neutral Solution

Stable Silicon-Based Sandwich Photoelectrode for Efficient Solar Hydrogen Evolution

Silicon Photoanodes Partially Covered By Ni@Fe Core-Shell Particles With In Situ Formed Gradient-Enhanced Junction Electric Field For Photoelectrochemical Water Oxidation

An Interface‐cascading Silicon Photoanode with Strengthened Built‐in Electric Field and Enriched Surface Oxygen Vacancies for Efficient Photoelectrochemical Water Splitting

Achieving 12.0% Solar-to-Hydrogen Efficiency with a Trimetallic-Layer-Protected and Catalyzed Silicon Photoanode Coupled with an Inexpensive Silicon Solar Cell

Engineering Single-Atomic Ni-N4-O Sites on Semiconductor Photoanodes for High-Performance Photoelectrochemical Water Splitting

Engineering Single-Atomic Ni-N 4 -O Sites on Semiconductor Photoanodes for High-Performance Photoelectrochemical Water Splitting

Metal Sputtering Buffer Layer for High Performance Si-Based Water Oxidation Photoanode

n‐ZrS3/p‐ZrOS Photoanodes with NiOOH/FeOOH Oxygen Evolution Catalysts for Photoelectrochemical Water Oxidation

Performance and failure modes of Si anodes patterned with thin-film Ni catalyst islands for water oxidation

NiFe Alloy Protected Silicon Photoanode for Efficient Water Splitting

Conductive layer protected and oxide catalyst-coated thin-film silicon solar cell as an efficient photoanode

High‐Performance and Stable Silicon Photoanode Modified by Crystalline Ni@ Amorphous Co Core‐Shell Nanoparticles

Metal Silicidation in Conjunction with Dopant Segregation: A Promising Strategy for Fabricating High-Performance Silicon-Based Photoanodes

Aging Ni(OH)2 on 3C-SiC Photoanodes to Achieve a High Photovoltage of 1.1 V and Enhanced Stability for Solar Water Splitting in Strongly Alkaline Solutions