Abstract:Sample preparation is a crucial set of unit operations that is performed on the sample to make it suitable for detection or sensing. Miniaturization of the sample preparation steps and their integration with the sensor is important for developing truly point of care sensing systems or the so called “Lab-on-Chip” devices. An ideal point of care device should be able to take raw sample in and provide information out. Sample preparation in such a setting should be performed with minimal intervention by the user, in an automated way and possibly without the use of external reagents. Although many microfluidic Lab-on-Chip devices have been developed with integrated sample preparation capability, the focus of the innovation has been on the sensor itself. They have typically used the same sequence of unit operations as the laboratory tests that they are based on and do not necessarily exploit the advantages of miniaturization to optimize sample preparation. We posit here that these devices should be developed with a focus on easy and simple sample preparation with minimal to no user intervention in order to find widespread applicability Here, we present examples of developing devices with focus on redesigning sample preparation methods to enable ease of use. First we demonstrate a simple microfluidic device (shown in Figure 1a) that can be used to analyse the cell free DNA concentration, a biomarker that is a prognostic indicator of mortality, at the bedside of septic patients. The device can separate cell free DNA from whole blood, concentrate it and quantify the concentration in a small form factor and under 5 min using small amount (10 uL) of blood. The device exploits the advantages of miniaturization in combining several unit operations that are normally performed sequentially in the laboratory so that the assay can be done faster. In another example, we exploit the advantage of miniaturization to perform bacterial culture assays faster. Bacterial culture and staining is the oldest method of diagnosis of bacterial infection. However, they are slow and take anywhere between 1 day (E.Coli) to few weeks (Mycobacteria). Molecular assays based on nucleic acids or proteins as biomarkers have emerged over the past few decades as faster methods to identify a pathogen. However, these assays do not provide viability or drug effectiveness information that are useful for medical professionals to formulate their treatment. In order to make culture based detection faster, we have developed a novel platform that automatically segments a sample in thousands of nanovolume wells. The device design is optimized to automatically segment the sample using a simple squeegee and under 1 min (shown in Figure 1b) which is suitable for point of care applications in resource poor settings. Metabolic activity of the bacteria aliquoted into these nanowells can be measured as an indicator of their presence and viability. By segmenting the sample into small volumes we show that the analysis time can be made much smaller especially at low concentrations. We also demonstrate single cell detection. The compact form factor of these devices and the minimal need for external reagents make them ideally suited for point of care testing. Figure 1

A microfluidic device for dry sample preservation in remote settings.

Flow Stabilizer on a Syringe Tip for Hand-Powered Microfluidic Sample Injection

BioDry: An Inexpensive, Low-Power Method to Preserve Aquatic Microbial Biomass at Room Temperature

Vacuum-Tight Sample Transfer Stage for A Scanning Electron Microscopic Study of Stabilized Lithium Metal Particles

(Invited) Simple Microfluidic Sample Preparation for Point of Care Diagnostics

A Portable Microfluidic Device for Thermally Controlled Granular Sample Manipulation.

A scalable microfluidic chamber array for sample-loss-free and bubble-proof sample compartmentalization by simple pipetting

A LOW-COST EASY-TO-FABRICATE SANDWICH-STRUCTURED MICRODEVICE FOR CONTROLLABLE REMOVAL OF EXTRACELLULAR CRYOPROTECTIVE AGENTS WITH HIGH EFFICIENCY

Reagent storage and delivery on integrated microfluidic chips for point-of-care diagnostics

Facile Microfluidic Device for Droplets Emulsion from Small Samples

A home-made pipette droplet microfluidics rapid prototyping and training kit for digital PCR, microorganism/cell encapsulation and controlled microgel synthesis

Storing self-contained gel capillary cassettes for POC medical diagnostics

Self-Propelled and Electrobraking Synergetic Liquid Manipulator toward Microsampling and Bioanalysis

Making Healthcare Accessible: A Rapid Clean-Room-Free Fabrication Strategy for Microfluidics-Driven Biosensors Based on Coupling Stereolithography and Hot Embossing

A vacuum-assisted, highly parallelized microfluidic array for performing multi-step digital assays

A hand-powered microfluidic system for portable and low-waste sample discretization

Dried Blood Spot Recovery: A Microfluidic Technique for Fast Elution Without Dilution

Hand-powered microfluidics: A membrane pump with a patient-to-chip syringe interface

Sample Preparation In Microstructured Devices

Engineering a Microfluidic Platform to Cryopreserve Stem Cells: A DMSO‐Free Sustainable Approach

Integrated Microdroplet-Based System for Enzyme Synthesis and Sampling