Abstract:The increasing demand for wind power has led to a significant increase in the number and size of wind turbine blades manufactured globally. As the number and physical size of turbines deployed grow, the probability of manufacturing defects being present in composite turbine blades also increases. As capital blade costs and operational and maintenance expenses increase in ever larger turbine systems, the need for inspection of the structural health of large-scale turbine blades during operation critically increases. One method for locating and quantifying manufacturing defects, while also allowing for the in situ measurement of the structural health of blades, is monitoring the full-field deformation and strain of a blade. In a demonstration of this methodology, static tests were performed on a Sandia National Laboratories CX-100 9-m composite turbine blade to extract full-field displacement and strain measurements. Three-dimensional digital image correlation was used. Measurements were taken at previously identified damaged areas near the blade root, along the high- and low-pressure surfaces. The results indicate that the measurement approach can clearly identify failure locations and discontinuities in the blade curvature under load. Postprocessing of the data, using a stitching technique of digital image correlation snapshots taken along the length of the blade, allows observation of the shape and curvature of the entire blade. The experiment demonstrates the feasibility of the approach and reveals that the technique can be readily scaled to accommodate utility-scale blades. As long as a trackable pattern is applied to the surface of the blade, measurements can be made in situ when a blade is on a manufacturing floor, installed in a test fixture, or installed on a rotating turbine. The results demonstrate the potential of the optical measurement technique for use in the wind industry.

Material damage diagnosis and characterization for turbine rotors using three-dimensional adaptive ultrasonic NDE data reconstruction techniques.

Detection and Quantification of Damage in Metallic Structures by Laser-Generated Ultrasonics

A modified phase space warping method for tracking damage evolution of rotating machineries

Damage Mode Identification of Composite Wind Turbine Blade under Accelerated Fatigue Loads Using Acoustic Emission and Machine Learning

Damage Mode Identification and Singular Signal Detection of Composite Wind Turbine Blade Using Acoustic Emission

Damage Detection for Rotating Blades Using Digital Image Correlation with an AC-SURF Matching Algorithm

Damage detection and full surface characterization of a wind turbine blade using three-dimensional digital image correlation

Processing Ultrasonic Inspection Data from Multiple Scan Patterns for Turbine Rotor Weld Build-Up Evaluations

Detection of Three-Dimensional Parameter of Defects for Gas Turbine Blades Based on Two-Dimensional Digital Radiographic Projective Imaging

Risk Assessment of Turbine Rotor Failure Using Probabilistic Ultrasonic Non-Destructive Evaluations

Damage Identification of Wind Turbine Blades Using an Adaptive Method for Compressive Beamforming Based on the Generalized Minimax-Concave Penalty Function

Probabilistic Fatigue Life Prediction and Structural Reliability Evaluation of Turbine Rotors Integrating an Automated Ultrasonic Inspection System

Induction Infrared Thermography and Thermal-Wave-Radar Analysis for Imaging Inspection and Diagnosis of Blade Composites

3D Positioning of Defects for Gas Turbine Blades Based on Digital Radiographic Projective Imaging

Research on the Defect Types Judgment in Wind Turbine Blades Using Ultrasonic NDT

Fault Diagnosis of Demountable Disk-Drum Aero-Engine Rotor Using Customized Multiwavelet Method

Damage detection in wind turbine blades using embedded radar networks

Unsupervised acoustic detection of fatigue-induced damage modes from wind turbine blades

Damage identification of wind turbine blades using the microphone array under different parametric and measuring conditions: A prototype study with laboratory-scale models

An Ultra-Compliant and Flexible Structural Sensing Neural System for Damage Detection in Wind Turbine Blades

Ultrasonic guided wave damage localization method for composite fan blades based on damage-scattered wave difference