Abstract:In this work, ZK60 magnesium alloy was employed as the substrate substratum for producing micro-arc oxidation (MAO) coating which contains Ca and P. Electrophoretic deposition (ED) process was conducted on the micro-arc oxidized sample to prepare a hydroxyapatite (HA) layer on the original coating. X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectrometer (EDS) and Fourier transform infrared spectroscopy (FT-IR) were used to analyze the phase constituents and microstructures of both MAO and MAO-ED coatings. Corrosion resistance and degradation behavior of the coatings in SBF were investigated by electrochemical tests and simulated body fluid (SBF) immersion tests. The results indicate that a dense HA layer about 5 μm in thickness had been successfully prepared on the MAO coating. After going through the ED process, the porosity of the MAO-ED coating had decreased from 5.63 to 0.81%. The Ca/P ratio of the MAO-ED coating had become 1.60, which indicates a potential biocompatibility of the material. Therefore, the MAO-ED coating can induce the deposition of bioactive products from SBF. During an immersion test of SBF for 10 days, the weight gain of MAO-ED sample continued to increase, showing that the deposition rate of the induced products is always higher than that of corrosion products before experiencing the 10 days of immersion. The deposition of induced products protects the substrate from being corroded so effectively that it ensures the good mechanical properties and biocompatibility during the initial stage of implantation. According to the changes in sample morphologies and the electrochemical measurements in SBF, a relevant degradation model has been suggested and the underlying mechanism for degradation behavior is discussed.

Degradable Behavior and Bioactivity of Micro-Arc Oxidized AZ91D Mg Alloy with Calcium Phosphate/chitosan Composite Coating in M-Sbf.

Micro-arc Oxidation Behaviors of AZ91D Magnesium Alloy in Different Electrolytes

Degradation Behavior Of Micro-Arc Oxidized Zk60 Magnesium Alloy In A Simulated Body Fluid

Preparation and Degradation Behavior of Composite Bio-Coating on ZK60 Magnesium Alloy Using Combined Micro-Arc Oxidation and Electrophoresis Deposition

Biodegradation Behavior of Micro-Arc Oxidation Coating on Magnesium Alloy-from a Protein Perspective

Optimization of the in Vitro Biodegradability, Cytocompatibility, and Wear Resistance of the AZ31B Alloy by Micro-Arc Oxidation Coatings Doped with Zinc Phosphate

A chitosan/polylactic acid composite coating enhancing the corrosion resistance of the bio-degradable magnesium alloy

In Vitro Corrosion and Cytocompatibility of A Microarc Oxidation Coating and Poly(L-Lactic Acid) Composite Coating on Mg-1li-1ca Alloy for Orthopedic Implants

Microstructure and Corrosion Behavior of Thermal-Sprayed Hydroxyapatite/Magnesium Composite Coating on the Surface of AZ91D Magnesium Alloy

An In-Situ Degradation Behavior Study of Mao Coating on Az91d Magnesium Alloy in Aqueous Solutions by Secm

Fabrication and Characterization of Micro-arc Oxidation (MAO) Coatings on Novel Biodegradable Mg-1Ca Alloy for Orthopaedic Application

A Novel Anti-Corrosion and Antibacterial Integrated MAO/PCNZ Composite Coating on AZ31B Mg Alloy

Corrosion resistance and molecular dynamics behavior of the MAO/SAM composite coatings on magnesium alloy

Corrosion Resistance and Surface Biocompatibility of a Microarc Oxidation Coating on a Mg–Ca Alloy

Effect of equal channel angular pressing as the pretreatment on microstructure and corrosion behavior of micro-arc oxidation (MAO) composite coating on biodegradable Mg-Zn-Ca alloy

Bioactive MAO/CS composite coatings on Mg-Zn-Ca alloy for orthopedic applications

Neuropathic pain inhibitor, RAP-103, is a potent inhibitor of microglial CCL1/CCR8

In Vitro Corrosion Behavior of Zr-Containing MAO-PLA Composite Coating on Magnesium Alloy

In Vitro and in Vivo Biodegradation and Biocompatibility of an MMT/BSA Composite Coating Upon Magnesium Alloy AZ31

Electrochemical Behavior Al[sub 2]o[sub 3]∕al Coated Surgical AZ91 Magnesium Alloy in Simulated Body Fluids

Corrosion behavior of biomedical AZ91 magnesium alloy in simulated body fluids