Abstract:A novel, fast, and cheap nonchromatographic method for direct speciation of dissolved inorganic and organic selenium species in environmental and biological samples was developed by flow injection (FI) dual-column preconcentration/separation on-line coupled with ICP-MS determination. In the developed technique, the first column packed with nanometer-sized Al2O3 could selectively adsorb the inorganic selenium [Se(IV), Se(VI)], and the retained inorganic selenium could be eluted by 0.2 mol l(-1) NaOH, while the organic Se [selenocystine (SeCys(2)) and selenomethionine (Se-Met)] was not retained. On the other hand, the second column packed with mesoporous TiO2 chemically modified by dimercaptosuccinic acid (DMSA) could selectively adsorb Se(IV) and SeCys(2) and barely adsorb Se(VI) and Se-Met. When the sample solution was passed through the column 1, separation of inorganic selenium and organic selenium could be achieved first. Then, the effluent from column I was successively introduced into the column 2 and the speciation of organic selenium could be attained due to the different adsorption behaviors of Se-Met and SeCys(2) on DMSA modified TiO2. After that, the eluent from column 1 contained Se(IV), and Se(VI) was adjusted to desired pH and injected into column 2, and the speciation of Se(IV) and Se(VI) could also be realized thanks to their different retention on column 2. The parameters affecting the separation were investigated systematically and the optimal separation conditions were established. The detection limits obtained for Se(IV), Se(VI), Se-Met and SeCys(2) were 45-210 ng l(-1) with precisions of 3.6-9.7%. The proposed method has been successfully applied for the speciation of dissolved inorganic and organic selenium in environmental and biological samples. In order to validate the methodology, the developed method was also applied to the speciation of selenium in certified reference material of SELM-1 yeast, and the determined values were in good agreement with the certified values. Copyright (C) 2007 John Wiley & Sons, Ltd.

Determination of Trace Amounts of Se(IV) by Hydride Generation Atomic Fluorescence Spectrometry after Solid-Phase Extraction Using Magnetic Multi-Walled Carbon Nanotubes.

Ultrasensitive Determination of Selenium by Atomic Fluorescence Spectrometry Using Nano-Tio2 Pre-Concentration and in Situ Hydride Generation

Flow Injection On-Line Sorption Preconcentration Coupled with Hydride Generation Atomic Fluorescence Spectrometry Using A Polytetrafluoroethylene Fiber-Packed Microcolumn for Determination of Se(Iv) in Natural Water

Magnetic dispersive micro-solid phase extraction coupled with dispersive liquid-liquid microextraction followed by graphite furnace atomic absorption spectrometry for quantification of Se(IV) and Se(VI) in food samples

Determination Of Ultra-Trace Amounts Of Selenium In Environmental Samples By Sequential Injection-Hydride Generation-Nondispersive Atomic Fluorescence Spectrometry

A Silver Nanoparticle-Based Colorimetric Assay of Trace Selenium with Hydride Generation for Sample Introduction

Determination and speciation of trace and ultratrace selenium ions by energy-dispersive X-ray fluorescence spectrometry using graphene as solid adsorbent in dispersive micro-solid phase extraction

Separation and Preconcentration of Se(IV)/Se(VI) Species by Selective Adsorption Onto Nanometer-Sized Titanium Dioxide and Determination by Graphite Furnace Atomic Absorption Spectrometry.

Magnetic dispersive solid phase extraction using modified magnetic multi-walled carbon nanotubes combined with electrothermal atomic absorption spectrometry for the determination of selenium

On-line Organoselenium Interference Removal for Inorganic Selenium Species by Flow Injection Coprecipitation Preconcentration Coupled with Hydride Generation Atomic Fluorescence Spectrometry.

One-pot preparation of magnetic composite containing boronic acid groups and aminated multwalled carbon nanotubes for the speciation of Se(IV) and Se(VI) in water and milk samples by combination with chromatographic quantification

A Hydride Generation Atomic Fluorescence Spectrometric Procedure for Selenium Determination after Flow Injection On-Line Co-Precipitate Preconcentration

Simultaneous Determination of Se and Te in Ores by Hg-Afs after Online Preconcentration with Nano-Tio2 Immobilized on Silica Gel

Determination of Inorganic Selenium Speciation in Natural Water by Sector Field Inductively Coupled Plasma Mass Spectrometry Combined with Hydride Generation

Hydride Generation for Headspace Solid-Phase Extraction with CdTe Quantum Dots Immobilized on Paper for Sensitive Visual Detection of Selenium.

Preconcentration and in-situ photoreduction of trace selenium using TiO 2 nanoparticles, followed by its determination by slurry photochemical vapor generation atomic fluorescence spectrometry

Determination of ultra-trace amounts of selenium(IV) by flow injection hydride generation atomic absorption spectrometry with on-line preconcentration by coprecipitation with lanthanum hydroxide

Determination of Selenium and Tellurium in Pure Cathode Copper by Hydride Generation-Atomic Fluorescence Spectrometry

Ultrasensitive determination of selenium in water and food samples by ICP-MS: UiO-66-NH 2 for preconcentration and direct slurry hydride generation

Organic and Inorganic Selenium Speciation in Environmental and Biological Samples by Nanometer-Sized Materials Packed Dual-Column Separation/Preconcentration On-Line Coupled with Icp-Ms

Ultrasensitive Determination of Selenium in Water and Food Samples by ICP-MS: UiO-66-NH2 for Preconcentration and Direct Slurry Hydride Generation