Abstract:A novel, fast, and cheap nonchromatographic method for direct speciation of dissolved inorganic and organic selenium species in environmental and biological samples was developed by flow injection (FI) dual-column preconcentration/separation on-line coupled with ICP-MS determination. In the developed technique, the first column packed with nanometer-sized Al2O3 could selectively adsorb the inorganic selenium [Se(IV), Se(VI)], and the retained inorganic selenium could be eluted by 0.2 mol l(-1) NaOH, while the organic Se [selenocystine (SeCys(2)) and selenomethionine (Se-Met)] was not retained. On the other hand, the second column packed with mesoporous TiO2 chemically modified by dimercaptosuccinic acid (DMSA) could selectively adsorb Se(IV) and SeCys(2) and barely adsorb Se(VI) and Se-Met. When the sample solution was passed through the column 1, separation of inorganic selenium and organic selenium could be achieved first. Then, the effluent from column I was successively introduced into the column 2 and the speciation of organic selenium could be attained due to the different adsorption behaviors of Se-Met and SeCys(2) on DMSA modified TiO2. After that, the eluent from column 1 contained Se(IV), and Se(VI) was adjusted to desired pH and injected into column 2, and the speciation of Se(IV) and Se(VI) could also be realized thanks to their different retention on column 2. The parameters affecting the separation were investigated systematically and the optimal separation conditions were established. The detection limits obtained for Se(IV), Se(VI), Se-Met and SeCys(2) were 45-210 ng l(-1) with precisions of 3.6-9.7%. The proposed method has been successfully applied for the speciation of dissolved inorganic and organic selenium in environmental and biological samples. In order to validate the methodology, the developed method was also applied to the speciation of selenium in certified reference material of SELM-1 yeast, and the determined values were in good agreement with the certified values. Copyright (C) 2007 John Wiley & Sons, Ltd.

Determination of Inorganic Selenium Speciation in Natural Water by Sector Field Inductively Coupled Plasma Mass Spectrometry Combined with Hydride Generation

Stability of selenium and its speciation analysis in water using automatic system separation and HR-ICP-MS measurement

Speciation Analysis of Selenium in Water Samples by High Performance Liquid Chromatography-Inductively Coupled Plasma Mass Spectrometry

Organic and Inorganic Selenium Speciation in Environmental and Biological Samples by Nanometer-Sized Materials Packed Dual-Column Separation/Preconcentration On-Line Coupled with Icp-Ms

Solvent Bar Microextraction Combined with Electrothermal Vaporization Inductively Coupled Plasma Mass Spectrometry for the Speciation of Inorganic Arsenic in Water Samples

Simultaneous Speciation of Inorganic Selenium and Antimony in Water Samples by Electrothermal Vaporization Inductively Coupled Plasma Mass Spectrometry Following Selective Cloud Point Extraction

On-line Organoselenium Interference Removal for Inorganic Selenium Species by Flow Injection Coprecipitation Preconcentration Coupled with Hydride Generation Atomic Fluorescence Spectrometry.

Simultaneous Measurements of Cr, Cd, Hg and Pb Species in Ng L-1 Levels by Interfacing High Performance Liquid Chromatography and Inductively Coupled Plasma Mass Spectrometry.

Hollow Fiber Liquid Phase Microextraction Combined with Electrothermal Vaporization ICP-MS for the Speciation of Inorganic Selenium in Natural Waters

Sensitive analysis of selenium speciation in natural seawater by isotope-dilution and large volume injection using PTV-GC-ICP-MS

Determination of Mercurial Species in Fish by Inductively Coupled Plasma Mass Spectrometry with Anion Exchange Chromatographic Separation

Simultaneous Enrichment of Inorganic and Organic Species of Lead and Mercury in Pg L−1 Levels by Solid Phase Extraction Online Combined with High Performance Liquid Chromatography and Inductively Coupled Plasma Mass Spectrometry

Polymer Monolithic Capillary Microextraction On-Line Coupled with ICP-MS for Determination of Inorganic Selenium Species in Natural Waters

A Hydride Generation Atomic Fluorescence Spectrometric Procedure for Selenium Determination after Flow Injection On-Line Co-Precipitate Preconcentration

Determination Of Ultra-Trace Amounts Of Selenium In Environmental Samples By Sequential Injection-Hydride Generation-Nondispersive Atomic Fluorescence Spectrometry

Simultaneous speciation of inorganic selenium and tellurium by inductively coupled plasma mass spectrometry following selective solid-phase extraction separation

Highly Sensitive Determination of Selenium, Arsenic and Mercury in Seawater by Hydride Generation Coupled with Solution Cathode Glow Discharge Optical Emission Spectrometry

Species selective concentration and determination of nano-selenium and inorganic selenium species in environmental waters by micropore membrane filtration and ICP-MS

Nanometer-sized Alumina Packed Microcolumn Solid-Phase Extraction Combined with Field-Amplified Sample Stacking-Capillary Electrophoresis for the Speciation Analysis of Inorganic Selenium in Environmental Water Samples.

Determination of Selenium in Marine Aquatic Products by Hydride Generation-atomic Fluorescence Spectrometry （HG-AFS）

Field Determination and Spatial Distribution of Se (IV) in Coastal Seawater of China