Abstract:Agar is extracted from red seaweed (Rhodophyceae). It is insoluble in cold water and hydrates. With good characteristics of reversibility of gel and security, agar is widely used in food, bio-engineering, medicine and other fields. Because some foods are sensitive to high temperature, the need for fully hydrate agar by boiling may limit its use in gel applications. It was reported that the agar was mixed with water and other materials such as sugar, locust bean gum, guar gum or other dispersants to improve its solubility. In order to obtain the optimal processing conditions for agar which dissolves at 60℃ with high gel strength, agar from Chinese Gracilaria Lemaneiformis was extruded and processed without adding other substances by a twin screw extruder, then the production was crushed into powder, sieved, sealed and stored. First, processing temperature, liquid to solid ratio, screw revolution speed and nozzle diameter were optimized by single factor experiment for analyzing their influences on the solubility properties at low temperature and gel strength of agar. The process conditions of agar that dissolves at 60℃ with high gel strength were optimized by Box-Behnken design and response surface methodology. Texture analyzer and advanced rheometer were used to determine gel strength and melting-gelling point respectively. The data were analyzed using SPSS 18.0 and Design-Expert 8.0. Finally the physical indexes of agar were determined. The results showed that processing temperature was the most significant factor affecting the solubility properties of agar at low temperature. Because the surface of agar formed porous expanded state at appropriate processing temperature and the particle size of agar after crushing and sieving was moderate, agar with good flowability and dispersibility dissolved at low temperature. Processing temperature and liquid to solid ratio had significantly influence on the gel strength of agar, while screw revolution speed was the least significant factor. Also, processing temperature and liquid to solid ratio had significant interaction. The optimized technological parameters were as follows: processing temperature 126℃, liquid to solid ratio 0.37 mL/g, screw revolution speed 150 r/min and nozzle diameter 6 mm, the measured average gel strength(mass concentration 1%) was 683.6 g/cm2, which was consistent well with the predicted value 693.4 g/cm2. The physical index of agar were as follows: the gelling temperature 31℃, the melting point 72℃, moisture content 15.2%, pH value 5.64. This study can provide a reference for factory production. Gracilaria is the main species utilised for commercial agar production in China. The improved solubility and high gel strength allow the gelling agent agar to be used more widely in food applications. The production of agar by this method exhibits low solution temperature, high gel strength and saving the industrial production of energy, but it requires 7-10 min to dissolve under stirring. The instant agar at low temperature will be the main direction of the further development.

High Temperature and Low Acid Pretreatment and Agarase Treatment of Agarose for the Production of Sugar and Ethanol from Red Seaweed Biomass.

Highly Efficient Conversion of Sugarcane Bagasse Pretreated with Liquid Hot Water into Ethanol at High Solid Loading

Improvement of Bacillus subtilis PI agarase production, hydrolysate scavenging capability assessment, and saccharification of algal biomass for green ethanol generation

Low-temperature Sodium Hydroxide Pretreatment for Ethanol Production from Sugarcane Bagasse Without Washing Process.

Efficacy of Acidic Pretreatment for the Saccharification and Fermentation of Alginate from Brown Macroalgae

Applying Both Chemical Liquefaction and Enzymatic Catalysis Can Increase Production of Agaro-Oligosaccharides from Agarose

Enzymatic and organic acid pretreatment of seaweed: effect on reducing sugars production and on biogas inhibition

Efficient Sugar Release by Acetic Acid Ethanol-Based Organosolv Pretreatment and Enzymatic Saccharification.

Aqueous Ammonia With Sodium Sulfite Pretreatment For Enhancing Enzymatic Saccharification and Bioethanol Production of Sugarcane Bagasse

Optimization of the preparation for the agar oligosaccharides by enzymatic hydrolysis

Convenient Agarose Preparation with Hydrogen Peroxide and Desulfation Process Analysis.

Characterization and Application of a Recombinant Exolytic GH50A β-Agarase from Cellvibrio sp. KY-GH-1 for Enzymatic Production of Neoagarobiose from Agarose

Production of extracellular agarase from Priestia megaterium AT7 and evaluation on marine algae hydrolysis

Impact of Alkali Pretreatment on Yield, Physico-Chemical and Gelling Properties of High Quality Agar from Gracilaria Tenuistipitata

The Optimization of Saccharification of Desulfurated Red Seaweed-Derived Polysaccharides and Analysis of Their Composition

Optimal sugar release from macroalgal feedstock with dilute acid pretreatment and enzymatic hydrolysis

Controllable and Complete Conversion of Agarose into Oligosaccharides and Monosaccharides by Microwave-Assisted Hydrothermal and Enzymatic Hydrolysis and Antibacterial Activity of Agaro-Oligosaccharides.

Pre-treatment of Sugarcane Bagasse with Aqueous Ammonia-Glycerol Mixtures to Enhance Enzymatic Saccharification and Recovery of Ammonia

Enhancing fermentable sugar production from sugarcane bagasse through surfactant-assisted ethylene glycol pretreatment and enzymatic hydrolysis: Reduced temperature and enzyme loading

Optimization of fermentation conditions, enzymatic properties and sugar metabolic pathways of agarase-producing strain

Production of Agar with Low-Temperature Solubility and High Gel Strength from Gracilaria by Screw Extrusion