Abstract:We propose and experimentally demonstrate broadband, low-crosstalk, and low-loss polarization splitter-rotators (PSRs) with optimized taper structures at 1550-nm and 1310-nm wavelengths, respectively. The PSRs consist of particle swarm optimization (PSO) based bi-level tapers and shortcuts to adiabaticity (STA) based ridge-waveguide couplers. Ridge waveguides are introduced to increase the coupling coefficient of the STA based coupler and to reduce the crosstalk from TM0 mode. The measured polarization conversion losses (PCLs) and crosstalk (CT) are less than 0.6 dB and –20 dB, respectively, from 1500 nm to 1600 nm wavelength for the 1550-nm PSR. The measured PCLs and CT are less than 1 dB and –22 dB, respectively, from 1260 nm to 1340 nm wavelength for the 1310-nm PSR. High-performance PSRs are preferred to realize polarization diversity for silicon photonic circuits. Various structures of PSR have been proposed, including asymmetrical directional coupler (ADC) [1,2], bi-level taper plus ADC [3], bi-level taper plus multimode interference coupler [4], bi-level taper plus adiabatic coupler [5], and bi-level taper plus asymmetric Y-junction [6]. However, none of them can have a PCL value less than 1 dB and a CT value less than –20 dB within a 80-nm-wide wavelength range. The scanning electron microscope (SEM) pictures of the 1550-nm and 1310-nm PSRs are shown in Fig. 1 and Fig. 2, respectively. The PSR consists of a TM0-TE1 bi-level taper and a TE0-TE1 demultiplexer. The bi-level tapers are optimized based on the PSO method. The tapers, which are 20-μm long, are divided into 4 and 10 segments with equal length for the 1550-nm and 1310-nm PSR respectively. The maximum values of the average TM0–TE1 conversion efficiencies over the wavelengths from 1500 nm to 1600 nm and from 1260 nm to 1360 nm are set to the Figure of Merit for the 1550-nm and 1310-nm PSRs, respectively. The TE0-TE1 demultiplexer is optimized based on the STA method [7]. The coupling length is 70 μm. The minimum edge-gaps are 200 nm and 160 nm for the 1550-nm and 1310-nm PSRs, respectively. The total PSR lengths are about 120 μm. Fig. 3 shows the measured results of the 1550-nm PSR. The PCLs and CT are less than 0.6 dB and –20 dB, respectively, from 1500 nm to 1600 nm wavelength. Fig. 4 shows the measured results of the 1310-nm PSR. The PCLs and CT are less than 1 dB and –22 dB, respectively, from 1260 nm to 1340 nm wavelength. The measured broadband operation is limited by the available bandwidth of grating couplers. In conclusion, we have proposed and demonstrated practical PSRs at 1550-nm and 1310-nm wavelengths, respectively. The PSRs show lower PCL less than 1 dB and lower polarization CT less than –20 dB within a 80-nm-wide wavelength range.

Fabrication Tolerant Polarization Splitter and Rotator Based on A Tapered Directional Coupler

Broadband and Low-Crosstalk Polarization Splitter-Rotator with Optimized Tapers

Broadband Polarization-Independent Directional Coupler Using Asymmetric-Waveguides

Polarization splitter-rotators with optimized taper structures

Design of Compact and Easy-fabricated Polarization Splitter-rotator Based on Slotted Waveguide

High-performance Ultra-Compact Polarization Splitter-Rotators Based on Dual-Etching and Tapered Asymmetrical Directional Coupler

Proposal for Fabrication-Tolerant SOI Polarization Splitter-Rotator Based on Cascaded MMI Couplers and an Assisted Bi-Level Taper.

Silicon Polarization Splitter and Rotator with Tolerance to Width Variations Using a Nonlinearly-Tapered and Partially-Etched Directional Coupler.

Design of a SiO_2 Top-Cladding and Compact Polarization Splitter-Rotator Based on a Rib Directional Coupler

Broadband Polarization Rotator and Splitter Based on 70 Nm-Etched Waveguides on SOI Platform

Silicon Polarization Switch Based on Symmetric Polarization Splitter-Rotators

Ultracompact Silicon-Based Polarization Splitter and Rotator Based on Asymmetric Directional Couplers with Subwavelength Gratings

Realization of a Compact Polarization Splitter-Rotator on Silicon

Compact Polarization Splitter Based on Silicon Grating-Assisted Couplers

CMOS-compatible highly efficient polarization splitter and rotator based on a double-etched directional coupler.

Design of a SiO₂ top-cladding and compact polarization splitter-rotator based on a rib directional coupler.

Ultra-broadband silicon polarization splitter-rotator based on the multi-mode waveguide

Ultracompact and High Efficient Silicon-Based Polarization Splitter-Rotator Using a Partially-Etched Subwavelength Grating Coupler

Compact Highly-Efficient Polarization Splitter And Rotator Based On 90 Degrees Bends

High-extinction-ratio Silicon Polarization Beam Splitter with Tolerance to Waveguide Width and Coupling Length Variations.

Compact highly-efficient polarization splitter and rotator based on 90° bends.