Abstract:Lithium-oxygen (Li-O2) batteries are nowadays among the most appealing next-generation energy storage systems in view of a high theoretical capacity and the use of transition-metal-free cathodes. Nevertheless, the practical application of these batteries is still hindered by limited understanding of the relationships between cell components and performances. In this work, we investigate a Li-O2 battery by originally screening different gas diffusion layers (GDLs) characterized by low specific surface area (<40 m2 g-1) with relatively large pores (absence of micropores), graphitic character, and the presence of a fraction of the hydrophobic PTFE polymer on their surface (<20 wt %). The electrochemical characterization of Li-O2 cells using bare GDLs as the support indicates that the oxygen reduction reaction (ORR) occurs at potentials below 2.8 V vs Li+/Li, while the oxygen evolution reaction (OER) takes place at potentials higher than 3.6 V vs Li+/Li. Furthermore, the relatively high impedance of the Li-O2 cells at the pristine state remarkably decreases upon electrochemical activation achieved by voltammetry. The Li-O2 cells deliver high reversible capacities, ranging from ∼6 to ∼8 mA h cm-2 (referred to the geometric area of the GDLs). The Li-O2 battery performances are rationalized by the investigation of a practical Li+ diffusion coefficient (D) within the cell configuration adopted herein. The study reveals that D is higher during ORR than during OER, with values depending on the characteristics of the GDL and on the cell state of charge. Overall, D values range from ∼10-10 to ∼10-8 cm2 s-1 during the ORR and ∼10-17 to ∼10-11 cm2 s-1 during the OER. The most performing GDL is used as the support for the deposition of a substrate formed by few-layer graphene and multiwalled carbon nanotubes to improve the reaction in a Li-O2 cell operating with a maximum specific capacity of 1250 mA h g-1 (1 mA h cm-2) at a current density of 0.33 mA cm-2. XPS on the electrode tested in our Li-O2 cell setup suggests the formation of a stable solid electrolyte interphase at the surface which extends the cycle life.

From Li–O2 to Li–Air Batteries: Carbon Nanotubes/Ionic Liquid Gels with a Tricontinuous Passage of Electrons, Ions, and Oxygen

Isolated Transition Metal Nanoparticles Anchored on N-doped Carbon Nanotubes As Scalable Bifunctional Electrocatalysts for Efficient Zn–air Batteries

Carbon Nanotube Wiring of Electrodes for High-Rate Lithium Batteries Using an Imidazolium-Based Ionic Liquid Precursor As Dispersant and Binder: A Case Study on Iron Fluoride Nanoparticles

Self-Catalyzed Growth of Co4N and N-Doped Carbon Nanotubes toward Bifunctional Cathode for Highly Safe and Flexible Li-Air Batteries

Intensive Investigation on All-Solid-state Li-air Batteries with Cathode Catalysts of Single-Walled Carbon Nanotube/ruo2

Self-Templated Formation of Carbon Nanotubes Interpenetrating Ordered Microporous Carbon Nanospheres for High-Performance Li–S Batteries

Oxygen-enriched Carbon Nanotubes As a Bifunctional Catalyst Promote the Oxygen Reduction/evolution Reactions in Li-O(2 )Batteries

Ionic‐Liquid‐Assisted Synthesis of N, F, and B Co‐Doped CoFe 2 O 4− x on Multiwalled Carbon Nanotubes with Enriched Oxygen Vacancies for Li–S Batteries

Intertwined Network of Si/C Nanocables and Carbon Nanotubes As Lithium-Ion Battery Anodes.

A Lithium‐Oxygen Battery Exploiting Carbon Nanotubes, Graphene and Gold Catalyst

Garnet Electrolyte‐Based Integrated Architecture for High‐Performance All‐Solid‐State Lithium‐Oxygen Batteries

Electrochemical Performance of Solid‐State Lithium–Air Batteries Using Carbon Nanotube Catalyst in the Air Electrode

Mesoporous Co3O4 -Rods-Entangled Carbonized Polyaniline Nanotubes as an Efficient Cathode Material toward Stable Lithium-Air Batteries

Orthogonal-Channel, Low-Tortuosity Carbon Nanotube Platforms for High-Performance Li-O2 Batteries

Fabrication and Performance of All-Solid-State Li-Air Battery with SWCNTs/LAGP Cathode.

A highly stable and flexible zeolite electrolyte solid-state Li–air battery

Gel-derived cation-π stacking films of carbon nanotube-graphene complexes as oxygen cathodes.

Sandwich-Structured Cathodes with Cross-Stacked Carbon Nanotube Films As Conductive Layers for High-Performance Lithium-Ion Batteries

A MOF Derived Co-NC@CNT Composite with a 3D Interconnected Conductive Carbon Network As a Highly Efficient Cathode Catalyst for Li–O2 Batteries

Influence of Ion Diffusion on the Lithium-Oxygen Electrochemical Process and Battery Application Using Carbon Nanotubes-Graphene Substrate

Carbon Cathodes in Rechargeable Lithium-Oxygen Batteries Based on Double-Lithium-Salt Electrolytes