Abstract:BackgroundThe primary objective of Tissue engineering is a regeneration or replacement of tissues or organs damaged by disease, injury, or congenital anomalies. At present, Tissue engineering repairs damaged tissues and organs with artificial supporting structures called scaffolds. These are used for attachment and subsequent growth of appropriate cells. During the cell growth gradual biodegradation of the scaffold occurs and the final product is a new tissue with the desired shape and properties.In recent years, research workplaces are focused on developing scaffold by bio-fabrication techniques to achieve fast, precise and cheap automatic manufacturing of these structures. Most promising techniques seem to be Rapid prototyping due to its high level of precision and controlling. However, this technique is still to solve various issues before it is easily used for scaffold fabrication.In this article we tested printing of clinically applicable scaffolds with use of commercially available devices and materials. Research presented in this article is in general focused on “scaffolding” on a field of bone tissue replacement.ResultsCommercially available 3D printer and Polylactic acid were used to create originally designed and possibly suitable scaffold structures for bone tissue engineering. We tested printing of scaffolds with different geometrical structures. Based on the osteosarcoma cells proliferation experiment and mechanical testing of designed scaffold samples, it will be stated that it is likely not necessary to keep the recommended porosity of the scaffold for bone tissue replacement at about 90%, and it will also be clarified why this fact eliminates mechanical properties issue. Moreover, it is demonstrated that the size of an individual pore could be double the size of the recommended range between 0.2–0.35 mm without affecting the cell proliferation.ConclusionRapid prototyping technique based on Fused deposition modelling was used for the fabrication of designed scaffold structures. All the experiments were performed in order to show how to possibly solve certain limitations and issues that are currently reported by research workplaces on the field of scaffold bio-fabrication. These results should provide new valuable knowledge for further research.

[Rapid Manufacturing of Degradable Porous Polymer Bone Scaffold].

Rapid Prototyping of Porous Poly (L-Lactic Acid) Scaffolds for Bone Tissue Engineering

Bone Tissue Scaffold Technologies Based on RP Adopted Droplet Assembly

3D Printing of Porous Degradable Scaffolds with Polylactic Acid‐Loaded Bioactive Glass and Calcium Sulfate Hemihydrate for Bone Defect Repair

Rapid Batch Surface Modification of 3D-Printed High-Strength Polymer Scaffolds for Enhanced Bone Regeneration In Vitro and In Vivo

Degradation mechanisms and acceleration strategies of poly (lactic acid) scaffold for bone regeneration

Low-Temperature Deposited Amorphous Poly(aryl ether ketone) Hierarchically Porous Scaffolds with Strontium-Doped Mineralized Coating for Bone Defect Repair.

Degradable smart composite foams for bone regeneration

Low-temperature Extrusion Manufacturing of Poly (L-Lactic Acid)/tricalcium Phosphate Composite Scaffolds for Bone Tissue Engineering

Polylactic acid scaffold with directional porous structure for large-segment bone repair

A Multimaterial Scaffold With Tunable Properties: Toward Bone Tissue Repair

A facile approach to fabricate load-bearing porous polymer scaffolds for bone tissue engineering

Fabrication of porous poly(?-lactic acid) scaffolds for bone tissue engineering via precise extrusion

Fabrication of 3D Printed PCL/PEG Polyblend Scaffold Using Rapid Prototyping System for Bone Tissue Engineering Application

Fabrication Technology of Tissue Engineering Scaffold Based on Rapid Prototyping

Porous Morphology, Porosity, Mechanical Properties Of Poly(Alpha-Hydroxy Acid)-Tricalcium Phosphate Composite Scaffolds Fabricated By Low-Temperature Deposition

3D Biocompatible Polyester Blend Scaffolds Containing Degradable Calcium Citrate for Bone Tissue Engineering

Designing of PLA scaffolds for bone tissue replacement fabricated by ordinary commercial 3D printer

Manufacture of degradable polymeric scaffolds for bone regeneration

A Novel Osteochondral Scaffold Fabricated Via Multi-nozzle Low-temperature Deposition Manufacturing

A Novel Poly (Lactic-Co-Glycolic Acid)-Collagen Hybrid Scaffold Fabricated Via Multi-Nozzle Low-Temperature Deposition