Abstract:Monte Carlo simulated SEM images for realistic instrumental conditions are used to evaluate measurement methods for SEM image sharpness. The Monte Carlo simulation of the SEM image is based on a well-developed physical model of electron-solid interaction, which employs Mott’s cross section for elastic electron scattering and dielectric functional approach to electron inelastic scattering with cascade secondary electron production included, a finite element mesh modeling of complex sample topography and a modeling of SEM instrumental conditions (i.e. focus, astigmatism, drift and vibration). A series of simulated SEM images of a realistic sample, gold particles on a carbon substrate, for different instrumental parameters are generated to represent practical images where all instrumental conditions are precisely known and controlled. An estimation of three measurement methods of SEM image sharpness, i.e. FT, CG and DR methods, has then been performed with these simulated images. The responses of image sharpness measurement methods to various instrumental conditions are studied. The calculation shows that all the three methods present similar and reasonable response to focus parameter; their dependences of the measured sharpness on astigmatism coefficient are complicated and CG method presents reasonable sharpness value. For drift and vibration, the situation is more complex because CG/DR methods can be less or more sensitive to vibration coefficient than FT method. Because of the different response behaviors of the three sharpness measurement methods to experimental parameters, we propose to use a mean, simple average or weighted average, of three sharpness values as a proper measure of sharpness.

Monte Carlo Simulation of Cd-Sem Images for Linewidth and Critical Dimension Metrology

Monte Carlo Simulation of Scanning Electron Microscope Image of Sidewall Shape for Linewidth Measurement.

Model-Based Library for Critical Dimension Metrology by CD-SEM

Uncertainty evaluation of Monte Carlo simulated line scan profiles of a critical dimension scanning electron microscope (CD-SEM)

Use of Model-Based Library in Critical Dimension Measurement by CD-SEM

Monte Carlo Simulation Study of Scanning Electron Microscopy Images of Rough Surfaces

Limits of model-based CD-SEM metrology

Application of Machine Learning Method to Model-Based Library Approach to Critical Dimension Measurement by CD-SEM

Critical-dimension scanning electron microscope characterization of smoothly varying wave structures with a Monte Carlo simulation

Monte Carlo Study of the Effective Electron Beam Shape in Scanning Electron Microscopic Imaging

Application of Monte Carlo Simulation Method to the Nano-Scale Characterization by Scanning Electron Microscopy

Sidewall angle calculation on CD-SEM metrology

Monte Carlo Simulation of Realistic Beam-Sample Interaction in SEM: Application to Evaluation of Sharpness Measurement Methods

A Simple And Practical Approach For Building Lithography Simulation Models Using A Limited Set Of Cd Data And Sem Pictures

Application of Monte Carlo simulation to SEM image contrast of complex structures

Monte Carlo Simulation of Secondary Electron and Backscattered Electron Images in Scanning Electron Microscopy for Specimen with Complex Geometric Structure

CD-SEM real time bias correction using reference metrology based modeling

An Optimized Parameter Guidance System for Line/Space CD Metrology

Diagnosing and removing CD-SEM metrology artifacts

Sensitivity of Scanning Electron Microscope Width Measurements to Model Assumptions