Abstract:Graphene-gold nanohybrids have become a hot research topic in material science, because the hybridization can be an effective strategy to enhance the functionality of materials and the integration of nanomaterials on graphene nanosheets potentially paves a new way to improve their electronic, chemical and electrochemical properties. The study reported a novel graphene-gold nanohybrid with excellent electrocatalytic performance for electrochemical detection of glucose. First, the monodisperse gold nanoparticles (GNs) were prepared via the citrate reduction associated with pH-shifting. The resulting GNs give an average particle size of 6 nm and narrow size distribution. Then, one part of the GN solution was mixed with the graphite oxide solution, which followed by the ascorbic acid reduction and unidirectional freeze-drying to prepare graphene aerogel@GNs (GA@GNs). The formed GA@GNs offers a well-defined three-dimensional and orientated porous structure. In addition, the most of GNs in the aerogel was embedded in the intertwined graphene sheets. Finally, another part of the GN solution was sucked into the GA@GNs to obtain GA@GNs/GNs. It was subjected to freeze-drying and thermal annealing in air at 180 degrees C to remove the citrate modified on the surface of GNs. Because their active sites were well exposed outside, the adsorbed GNs are of high catalytic activity. The study shows that the as-prepared GA@GNs/GNs gives high electrical conductivity (15.4 S m(-1)), specific surface area (291.6 m(2) g(-1)) and apparent heterogeneous electron transfer rate constant (14.8 +/- 0.12 cm s(-1)). The sensor based on the GA@GNs/GNs displays ultrasensitive electrochemical response to glucose, owing to largely enhanced electron transfer, mass transport and catalytic activity. Its peak current linearly increases with the increase of glucose in the range from 0.01 to 16 mM with the detection limit of 0.004 mM (S/N = 3). The analytical method presents the advantage of sensitivity, repeatability and stability compared with present glucose sensors. It has been successfully applied in the detection of glucose in serum samples with the spiked recovery of 95.7-104.2%. The study also provides a promising approach for building on various graphene-metal nanohybrids with excellent electrochemical performance for sensing, catalysis and energy storage/conversion devices. (C) 2014 Elsevier B.V. All rights reserved.

A graphene-cobalt oxide based needle electrode for non-enzymatic glucose detection in micro-droplets.

One step electrochemical deposition and reduction of graphene oxide on screen printed electrodes for impedance detection of glucose

A Novel Nonenzymatic Sensor Based on CuO Nanoneedle/graphene/carbon Nanofiber Modified Electrode for Probing Glucose in Saliva

Enzymeless Glucose Detection Based on CoO/Graphene Microsphere Hybrids

An efficient biosensor using a functionalized microneedle of Cu2O-based CoCu-LDH for glucose detection

A NiFe Alloy Reduced on Graphene Oxide for Electrochemical Nonenzymatic Glucose Sensing.

Design and Fabrication of Ag-CuO Nanoparticles on Reduced Graphene Oxide for Nonenzymatic Detection of Glucose

A disposable and sensitive non-enzymatic glucose sensor based on 3D graphene/Cu2O modified carbon paper electrode

Cobalt oxide nanosheets wrapped onto nickel foam for non-enzymatic detection of glucose

RGO@Cu2O@Cu Ternary Nanocomposite for High-Performance Non-Enzymatic Glucose Detection

RGO@Cu 2 O@Cu Ternary Nanocomposite for High-Performance Non-Enzymatic Glucose Detection

Electrochemical glucose sensitive device based on graphene supported Co3O4@Ag NWs core-shell nanostructures

Copper Nanoparticle/Graphene Oxide/Single Wall Carbon Nanotube Hybrid Materials As Electrochemical Sensing Platform for Nonenzymatic Glucose Detection

A non-enzymatic glucose sensor based on electrodepositing Cu/graphene nanocomposite film modified electrode

Novel Graphene-Gold Nanohybrid with Excellent Electrocatalytic Performance for the Electrochemical Detection of Glucose

Cobalt single atom sites in carbon aerogels for ultrasensitive enzyme-free electrochemical detection of glucose

Ultrasensitive Non-Enzymatic Glucose Sensors Based on Hybrid Reduced Graphene Oxide and Carbonized Silk Fabric Electrodes Decorated with Cu Nanoflowers

Cu2O-Based Electrochemical Biosensor for Non-Invasive and Portable Glucose Detection

Single-Step Formation Of Ni Nanoparticle-Modified Graphene-Diamond Hybrid Electrodes For Electrochemical Glucose Detection

Facile synthesis of nanospindle-like Cu2O/straight multi-walled carbon nanotube hybrid nanostructures and their application in enzyme-free glucose sensing

Cu2O nanowires with exposed {111} facet for nonenzymatic detection of glucose in complex biological fluids