Abstract:It is widely thought in electro-biochemical analysis that the sensing interfaces play a key role in the enzymeless detection of biomolecules like glucose, ascorbic acid, dopamine and uric acid. On the way to maximize the anti-poisoning sensitivity of nonenzymatic electrochemical glucose sensors as well as achieve favorable selectivity, we propose here a porous interface fabricated by a facile but effective approach for glucose monitoring in alkaline media containing dissolved oxygen. The sensing interface based on porous Cu foams is directly formed on a homemade disposable screen-printed carbon electrode (SPCE) substrate by electrodeposition assisted with hydrogen evolution simultaneously, and its porosity can be easily tailored through adjusting deposition conditions for the optimal electrocatalytic oxidation of glucose molecules. SEM and BET studies show that the generated Cu foam possesses robust hierarchical porous architectures with greatly enhanced surface area and pore volume, beneficial for the unimpeded mobility of glucose and reaction products. Cyclic voltammetric tests indicate that a diffusion-controlled glucose electro-oxidation reaction occurs at the Cu foam electrode at around +0.35 V vs. Ag/AgCl in 0.1 M NaOH. Chronoamperometric results obtained under optimized conditions reveal that the proposed sensor exhibits desired poison resistance ability in the presence of chloride ions and significant selectivity to glucose, providing fascinating sensitivities of 2.57 and 1.81 mA cm(-2) mM(-1) for glucose in the linear concentration ranges of 2-80 μM and 0.1-5 mM, respectively. The limit of detection is calculated to be as low as 0.98 μM according to the signal-to-noise ratio of three. In addition, the fabricated sensing interface shows attractive reproducibility (RSD of 5.1% and 7.0% for 15 repeated measurements on a sensor and for measurements on 15 prepared sensors, respectively) and outstanding long-term stability (less than 5% loss in sensitivity over 1 month) for glucose detection. The application of the Cu foam based sensor for monitoring glucose in practical samples is also successfully demonstrated.

A disposable and sensitive non-enzymatic glucose sensor based on 3D graphene/Cu2O modified carbon paper electrode

A Highly Sensitive Nonenzymatic Glucose Sensor Based on Cu/Cu2O Composite Nanoparticles Decorated Single Carbon Fiber

A Disposable and Sensitive Non-Enzymatic Glucose Sensor Based on a 3D-Mn-doped NiO Nanoflower-Modified Flexible Electrode

Non-enzymatic Glucose Sensor Based on Micro-/Nanostructured Cu/Ni Deposited on Graphene Sheets

A non-enzymatic glucose sensor based on electrodepositing Cu/graphene nanocomposite film modified electrode

A Novel Non-Enzymatic Glucose Sensor Based on Cu Nanoparticle Modified Graphene Sheets Electrode

Functional nanostructure-loaded three-dimensional graphene foam as a non-enzymatic electrochemical sensor for reagentless glucose detection

Ultrasensitive Non-Enzymatic Glucose Sensors Based on Hybrid Reduced Graphene Oxide and Carbonized Silk Fabric Electrodes Decorated with Cu Nanoflowers

A Flexible and Disposable Hybrid Electrode Based on Cu Nanowires Modified Graphene Transparent Electrode for Non-Enzymatic Glucose Sensor

A novel non-enzymatic glucose sensor based on a Cu-nanoparticle-modified graphene edge nanoelectrode

Precisely Quantified Catalyst Based on in Situ Growth of Cu2o Nanoparticles on A Graphene 3d Network for Highly Sensitive Glucose Sensor

Sensitive electrochemical nonenzymatic glucose sensing based on anodized CuO nanowires on three-dimensional porous copper foam

Free-standing Electrochemical Electrode Based on Ni(OH)2/3D Graphene Foam for Nonenzymatic Glucose Detection

Highly sensitive and selective nonenzymatic detection of glucose using three-dimensional porous nickel nanostructures.

Disposable and portable gold nanoparticles modified - laser-scribed graphene sensing strips for electrochemical, non-enzymatic detection of glucose

Ultrasensitive and Highly Flexible Nonenzymatic Glucose Biosensor Based on Laser-Scribed Carbon Paper Substrate

A Flexible Enzymeless Glucose Sensor Via Electrodepositing 3D Flower-like CoS Onto Self-Supporting Graphene Tape Electrode

A Highly Sensitive Non-Enzymatic Glucose Electrode Based on Truncated Octahedral CuO-modified Cu2O@Cu Composite

Cu2O-Based Electrochemical Biosensor for Non-Invasive and Portable Glucose Detection

Electrochemical Sensing Interfaces with Tunable Porosity for Nonenzymatic Glucose Detection: A Cu Foam Case

Copper/reduced graphene oxide film modified electrode for non-enzymatic glucose sensing application