Abstract:The conventional graphite anode is still insufficient to meet the demand due to its low theoretical specific capacity(372 mAhg-1). Compared to the graphite, the high surface-to-volume ratio and open porous system of graphene shows great advantages:i) fast ion transport enabling the high rate capability, which is an obstacle for graphite with microsize bulk lithium diffusion; ii) the large surface areas of graphene can provide more electrochemical reaction active sites for energy storage. Meanwhile, Graphene is an excellent substrate to host active nanomaterial for energy applications due to its high conductivity, large surface area, structural flexibility, and chemical stability.1,2Overall, the superior electronic conductivity and mechanical properties of graphene make it suitable for fabrication into high-performance composites with other anode materials for LIBs. Recently, Alloy-type anodes (Si, Ge, Sn, Sb, etc.) have attracted much attention due to their higher Li storage capacity than the graphite anode that is currently used in Li-ion batteries. Compared with the silicon etc., Germanium has high theoretical capacity (1384 mAh/g), good lithium diffusivity (400 times faster than in silicon), and high electrical conductivity (104 times higher than silicon).3 However, the practical usage of Ge as an anode material is hindered by dramatic volume changes (∼300%) caused by insertion/extraction of lithium ions, which results in crack and pulverization, and loss of electrode contact.4 Herein, we developed a facile synthesis method (solution-phase reactions) to form hybrid materials of amorphous hierarchical porous GeOx whose primary particles are 3∼7 nm diameter anchored on reduced grapheme oxide (RGO) sheets for lithium ion battery applications. The high rate performance of mesoporous GeOx/RGO composite is attributed to (1) the amorphous hierarchical porous GeOx whose primary particles are 3∼7 nm diameter anchored on conducting RGO stabilize the cycling performance and rate capability; (2)fast charge transfer reaction at the large interfacial area of RGO between hybrid electrode and liquid electrolyte. Acknowledgements This work is supported by the Project of the Ningbo 3315 International Team of Advanced Energy Storage Materials, China Postdoctoral Science Foundation funded project. References: Yoo, E., et al.Large reversible Li storage of graphene nanosheet families for use in rechargeable lithium ion batteries. Nano Letters. 2008.8(8): 2277-2282. Xiang, H. F., et al. Graphene sheets as anode materials for Li-ion batteries: preparation, structure, electrochemical properties and mechanism for lithium storage.Rsc Advances 2012. 2(17): 6792-6799. Wang, X. L., et al. Amorphous Hierarchical Porous GeOx as High-Capacity Anodes for Li Ion Batteries with Very Long Cycling Life. Journal of the American Chemical Society 2011. 133(51): 20692-20695 Yuan, F. W., et al. Alkanethiol-Passivated Ge Nanowires as High-Performance Anode Materials for Lithium-Ion Batteries: The Role of Chemical Surface Functionalization. Acs Nano 2012. 6(11): 9932-9942.

Amorphous Hierarchical Porous GeO(x) As High-Capacity Anodes for Li Ion Batteries with Very Long Cycling Life.

Three-Dimensional Double-Walled Ultrathin Graphite Tube Conductive Scaffold with Encapsulated Germanium Nanoparticles as a High-Areal-Capacity and Cycle-Stable Anode for Lithium-Ion Batteries

Ge/C Nanowires As High-Capacity and Long-Life Anode Materials for Li-Ion Batteries

The Development of Si and Ge-Based Nanomaterials for High Performance Lithium Ion Battery Anodes

GeO2 Nanoparticles Decorated in Amorphous Carbon Nanofiber Framework as Highly Reversible Lithium Storage Anode

Porous Nano-Structured GeO2 for High Performance Lithium Storage

Amorphous Hierarchical Porous GeO X /reduced Graphene Oxide Composite As a High-Performance Anode Material for Lithium Ion Batteries

Amorphous GeSnSe nanoparticles as a Li-Ion battery anode with High-Capacity and long cycle performance

A three-dimensional Ge@C anode with a hollow and micro/nano structure for high-capacity lithium-ion battery

GeO2 Encapsulated Ge Nanostructure with Enhanced Lithium‐Storage Properties

Hierarchical porous silicon structures with extraordinary mechanical strength as high-performance lithium-ion battery anodes

Heterogeneous isomorphism hollow SiGe nanospheres with porous carbon reinforcing for superior electrochemical lithium storage

Confining Nano-GeP in Nitrogenous Hollow Carbon Fibers toward Flexible and High-Performance Lithium-Ion Batteries

High Conductivity Cu 3 Ge and High-Capacity GeO 2 Synergistically Enhance a Continuous Channel Ge-Based Anode for Lithium-Ion Batteries with Long-Life and Scalable Preparation

Facile simultaneous polymerization enabled in-situ confinement of size-tailored GeO2 nanocrystals in continuous S-Doped carbons for lithium storage

Open-framework germanates derived GeO2/C nanocomposite as a long-life and high-capacity anode for lithium-ion batteries

Sandwiched Porous C/ZnO/Porous C Nanosheet Battery Anodes with Stable Solid-Electrolyte Interphase for Fast and Long Cycling

One-step in situ encapsulation of Ge nanoparticles into porous carbon network with enhanced electron/ion conductivity for lithium storage

Porous Co3V2O8 Nanosheets with Ultrahigh Performance As Anode Materials for Lithium Ion Batteries

A Hierarchical SiO 2 -Microsphere-Graphene Host Enabling Superior Long-Term Cycling for Lithium-Metal Anodes

Diatomite‐Derived Hierarchical Porous Crystalline‐AmorphousNetwork for High‐Performance and Sustainable Si Anodes