Diatomite‐Derived Hierarchical Porous Crystalline‐AmorphousNetwork for High‐Performance and Sustainable Si Anodes

Ying Zhang,Rui Zhang,Shucheng Chen,Hongpeng Gao,Mingqian Li,Xiaolan Song,Huolin L. Xin,Zheng Chen

DOI: https://doi.org/10.1002/adfm.202005956

IF: 19

2020-09-13

Advanced Functional Materials

Abstract:<p>Silicon has attracted considerable interest as a high‐capacity anode material for next‐generation lithium‐ion batteries. However, Si‐based anodes suffer extreme volume change (<b>≈</b>380%) upon lithiation and delithiation, which results in rapid capacity fading due to mechanical and electrochemical failure during cycling. Herein, a sustainable and scalable method to synthesize hierarchically porous micron‐sized Si particles from the low‐cost diatomite precursor is reported, which serves as both the precursor and the template. Through a one‐step magnesiothermic reduction, the SiO₂ constituent in diatomite is reduced to form a Si/SiO₂ composite network with 10–30 nm crystalline Si domains embedded within an amorphous SiO₂ matrix. Controlling the reduction time leads to an optimal ratio between the crystalline Si and the amorphous SiO₂ constituent, which endows the composite structure with high capacity and excellent cycling stability. For example, 90% capacity can be retained after 500 cycles at 0.2C for sample reduced by 6 h without any coating or prelithiation. The full cell with such Si/SiO₂ as the anode and LiNi_0.8Co_0.1Mn_0.1O₂ as the cathode shows <b>≈</b>80% capacity retention after 200 cycles. This work creates a unique path towards sustainable and scalable production of high‐performance micron‐sized Si anodes, offering new opportunities for potential industrial applications.</p>

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology

What problem does this paper attempt to address?

The problem this paper attempts to address is the development of a high-performance and sustainable silicon-based anode material to significantly enhance the energy density of next-generation lithium-ion batteries. Specifically, the paper proposes a method to prepare micron-sized silicon particles with a hierarchical porous structure from low-cost diatomaceous earth precursors to tackle the issue of large volume changes in silicon-based anode materials during charge and discharge cycles, which leads to rapid capacity decay. This method aims to optimize the ratio of crystalline silicon to amorphous silicon dioxide by controlling the reduction time, thereby endowing the composite structure with high capacity and excellent cycling stability. Additionally, this method is scalable and cost-effective, providing new opportunities for the industrial application of silicon-based anode materials.