Abstract:The symmetrical optical waveguide structures are fabricated in Er3+-doped aluminosilicate glass using 800 nm femtosecond laser writing in kHz repetition frequency regime. The impact of writing parameters on the waveguide preparation with a 10× microscope objective in the longitudinal writing scheme was studied in detail. The experimental results show that, under a fixed pulse energy value of 20 μJ, the waveguides can be realized with the scan speed from 20 to 160 μm/s, and with a fixed scan speed value of 160 μm/s, the waveguide can be prepared under an inscription energy range of 5–30 μJ, indicating that the waveguide can be realized in a wide range of writing parameters. The near-field mode intensity image shows that the waveguide region possesses excellent light guiding properties. Based on the refractive index profile reconstruction method, the maximum refractive index increase in the waveguide region is estimated to be about 5.5 × 10–4. The lowest propagation loss of the waveguide was measured to be about 1.51 dB/cm by the waveguide side scattering method. The microfluorescence spectra show that the gain characteristics of the waveguide region are well maintained after laser processing. This work shows that the fabrication of embedded optical waveguides using ultrashort pulse laser in Er3+-doped aluminosilicate glass has strong feasibility and great potential to create active gain devices in the field of integrated photonics and all-optical communication.

Mirrorless Lasing from Mesostructured Waveguides Patterned by Soft Lithography

Planar waveguide nanolaser configured by dye-doped hybrid nanofilm on substrate

Manipulative Dual-Microsphere Lasing Based on Nanosilica Waveguide Integrated in A Simplified Hollow-Core Microstructured Optical Fiber

Optical Lattice-Like Cladding Waveguides by Direct Laser Writing: Fabrication, Luminescence, and Lasing

Direct Writing of Buried Waveguides in Hybrid Organic-Inorganic Sol-Gel by Femtosecond Laser Pulses

Monolithic Crystalline Cladding Microstructures For Efficient Light Guiding And Beam Manipulation In Passive And Active Regimes

Enabling Waveguide Optics in Rhombohedral-Stacked Transition Metal Dichalcogenides with Laser-Patterned Grating Couplers

Femtosecond Laser Engraved 2D Tunable Optofluidic Liquid Core/Air Cladding Channel Waveguides on PDMS

Synthesis of Amphiphilic Dye-Self-Assembled Mesostructured Powder Silica with Enhanced Emission for Directional Random Laser

Low-Loss Channel Optical Waveguide Fabrication in Nd3+-Doped Silicate Glasses by Femtosecond Laser Direct Writing

Photonic-lattice-like Guiding Microstructures in Nd:YVO4 Waveguides: Fabrication, 3D Splitting, and Lasing

Near-infrared Luminescent Polymer Waveguides and Microlasers

Random Lasing in a Dye-Doped Polymer Thin Film Waveguide Deposited on a Si Surface Microstructured by Femtosecond Laser Ablation

Direct Writing of Channel Optical Waveguides in Er 3+ -Doped Aluminosilicate Glass by Low Repetition Rate Femtosecond Laser

Doped Mesoporous Silica Fibers: A New Laser Material

Single-step fabrication of surface waveguides in fused silica with few-cycle laser pulses

A Simplified Hollow-Core Microstructured Optical Fibre Laser With Microring Resonators And Strong Radial Emission

Fabrication Of Composite Sol-Gel Optical Channel Waveguides By Laser Writing Lithography

Tunable Distributed Feedback Lasing from Leaky Waveguides Based on Gel-Glass Dispersed Liquid Crystal Thin Films

High-performance Femtosecond-Laser Microfabricated Lattice-Like-cladding Waveguides in Er3+ and MgO Co-Doped LiNbO3 Crystals for Multi-Wavelength Guidance and Luminescence

1550-Nm Light Amplification from Erbium-Doped Silica Glass Waveguide Written by Femtosecond Laser Pulses