Abstract:In this work, the hydrogen desorption properties of the novel Mg-Al-H hydrogen storage composites prepared by ball-milling the as-received magnesium hydride (MgH2) and the as-prepared aluminum hydride (AlH3) with different molar ratios (1:1, 1:0.5, and 1:0.25) are investigated systematically. Nonisothermal desorption measurements show that more than 7.51 wt % of hydrogen is released from the Mg-Al-H composites when they are heated from room temperature to 500 degrees C. Thermal analysis by differential scanning calorimeter (DSC) and hydrogen desorption spectrum by mass spectrometer (MS-H-2) are used synchronously to study the desorption process of the Mg-Al-H. The onset hydrogen desorption temperature of MgH2 in the MgH2 + AlH3 composite is dramatically reduced from 320 degrees C for the pure MgH2 to below 252 degrees C. The DSC/MS-H-2 and the X-ray diffraction (XRD) analyses show that the desorption of MgH2 in the Mg-Al-H composite is composed of two steps with the reaction between MgH2 and Al forming Mg17Al12 as the first step and the self-decomposition of the residual MgH2 as the second step. Isothermal desorptions show that the desorption kinetics of the MgH2 in the Mg-Al-H composite is significantly improved. The apparent activation energy for the desorption of MgH2 in the MgH2 + 0.25AlH(3) is reduced to 144.6 kJ/mol, which contributes to the improvement in the desorption kinetics of MgH2. The Johnson-Mehl-Avrami (JMA) kinetic studies indicate that the desorption kinetic model of MgH2 in the Mg-Al-H composite is different from the pure MgH2. Concerning the reversibility, under the conditions of 300 degrees C and 5 MPa H-2, MgH2 in the Mg-Al-H composite is almost fully recovered after absorption for 5 h while it is partially recovered for the pure MgH2. Among the samples studied, the MgH2 + 0.25AlH(3) composite exhibits the highest reversible hydrogen storage capacity of 6.10 wt % (H/M).

Hydrogen Release from Mg(NH2)2−MgH2 Through Mechanochemical Reaction

Investigations on Hydrogen Desorption from the Mixture of Mg(Nh2)(2) and Cah2

Large Amount of Hydrogen Desorption from the Mixture of Mg(Nh2)(2) and Lialh4

Improved Hydrogen Storage Properties of MgH2 by Ball Milling with AlH3: Preparations, De/rehydriding Properties, and Reaction Mechanisms

Hydrogen generation from the hydrolysis of Mg powder ball-milled with AlCl3

Hydrogen desorption properties of the MgH2-AlH3 composites

Hydrogen Storage in a LiNH 2 -MgH 2 (1:1) System

Hydrogen Storage in a LiNH<sub>2</sub>−MgH<sub>2</sub>(1:1) System

Ultrafast Hydrogen Production via Hydrolysis of MgH2-NaH Composite

Exploration of hydrogen generation from an Mg-LiBH4 system improved by NiCl2 addition

Hydrogen Storage Behaviors and Microstructure of MF3 (m=ti, Fe)-doped Magnesium Hydride

Insights into the Dehydrogenation Reaction Process of A K-Containing Mg(Nh2)(2)-2lih System

Hydriding Characteristics of Mg2NiMg2Ni Prepared by Mechanical Milling of the Product of Hydriding Combustion Synthesis

Reaction pathways determined by mechanical milling process for dehydrogenation/hydrogenation of the LiNH2/MgH2 system

Synthesis And Hydrogen Storage Behaviour Of Pure Mg2feh6 At Nanoscale

Hydriding Characteristics of Mg2ni Prepared by Mechanical Milling of the Product of Hydriding Combustion Synthesis

Hydrogen storage properties of the Mg–Ti–H system prepared by high-energy–high-pressure reactive milling

Metathesis of Mg 2 FeH 6 and LiNH 2 leading to hydrogen production at low temperatures.

Improvement in the Hydrogen Storage Properties of MgH2 by Adding NaAlH4

Improvement in the Hydrogen-Storage Properties of Mg 2 Ni by Adding LiBH 4

A Combined Hydrogen Storage System of Mg(BH4)2−LiNH2with Favorable Dehydrogenation