Abstract:Emerging macro- and flexible electronic applications such as foldable displays, artificial skins, and smart textiles grow rapidly into the market. Solution-processed thin-film transistors (TFTs) based on single-walled carbon nanotubes (SWCNTs) as the semiconductor channel can offer high performance, low cost and versatility for macro- and flexible electronics. Major challenges to the development of SWCNT-based TFTs include: (i) hysteresis in their transfer characteristics (TCs), (ii) difficulties in simultaneous achievements of high on-state current Ion and large on/off current ratio Ion/Ioff, and (iii) poor uniformity and scalability resulting from the poor solution processability. This thesis aims at developing reliable and simple process techniques for fabrication of the SWCNT-based TFTs that possess the afore-stated characteristics. It presents a systematic investigation to not only explore the fundamental device physics, but also develop novel fabrication methods for enhancement of device performance.First, issues related to the measurement of gate capacitance (Cg), the determination of current scalability, and the hysteresis in randomly networked SWCNTs are properly addressed. This leads to the establishment of a comprehensive methodology for extraction of carrier mobility (μ) for the SWCNT-based TFTs. In detail, the large hysteresis is effectively suppressed by adopting a pulsed drain current-gate voltage (Id-Vg) method in which the polarity of the gate pulse was alternating during the measurement. Different from most reported methods in the literature, Cg is accurately determined in our case by performing direct capacitance-voltage measurement on the TFTs.Second, with the employment of functional composites comprising SWCNTs embedded in a semiconducting polymer, poly-9,9 dioctyl-fluorene-cobithiophene (F8T2), as the semiconducting channel via facile solution processes under ambient conditions, the fabricated TFTs exhibit outstanding electrical performance with: (i) negligible hysteresis, (ii) high μ, (iii) high Ion and large Ion/Ioff, (iv) excellent uniformity and dimensional scalability, and (v) good stability. These highly desired performance parameters are achieved owing to an ideal composite structure with metallic SWCNTs being selectively removed and the remaining semiconducting SWCNTs being well wrapped by the polymer matrix.Finally, the developed TFTs basing on the SWCNT/F8T2 composite are used as the building block to construct some logic circuits. The resultant inverters, NANDs, and NORs are found to retain the small-hysteresis characteristics, with a cut-off frequency reaching 100 kHz. The results presented in this thesis advance the state-of-art SWCNT-based macroelectronics.

Aerosol-Synthesized SWCNT Networks with Tunable Conductivity and Transparency by a Dry Transfer Technique

Ultrathin High-Mobility SWCNT Transistors with Electrodes Printed by Nanoporous Stamp Flexography

Transferable thin films of pristine carbon nanotubes.

Fast liquid-free patterning of SWCNT films for electronic and optical applications

Aerosol synthesis of single-walled carbon nanotubes by tuning feeding flow configuration for transparent conducting films

Transparent and Freestanding Single‐Walled Carbon Nanotube Films Synthesized Directly and Continuously via a Blown Aerosol Technique

Highly Transparent and Transferable Ultralong Carbon Nanotube Networks for Transparent Wearable Electronics

Highly Efficient Bilateral Doping of Single-Walled Carbon Nanotubes

The three-dimensional noncommutative Gross–Neveu model

Fabrication of All‐Carbon Nanotube Electronic Devices on Flexible Substrates Through CVD and Transfer Methods

High Throughput Production of Transparent Conductive Single-Walled Carbon Nanotube Films via Advanced Floating Catalyst Chemical Vapor Deposition

Highly Conductive Robust Carbon Nanotube Networks for Strong Buckypapers and Transparent Electrodes

Silver Nanowires on Carbon Nanotube Aerogel Sheets for Flexible, Transparent Electrodes

Single-Walled Carbon Nanotube Thin Film with High Semiconducting Purity by Aerosol Etching toward Thin-Film Transistors

Stable Doping of Single-Walled Carbon Nanotubes for Flexible Transparent Conductive Films

Highly transparent, low sheet resistance and stable Tannic acid modified-SWCNT/AgNW double-layer conductive network for organic light emitting diodes

Flexible, Transparent, Thickness-Controllable SWCNT/PEDOT:PSS Hybrid Films based on Coffee-Ring Lithography for Functional Noncontact Sensing Device.

Highly transparent tactile sensor based on a percolated carbon nanotube network

Cytological, molecular and life cycle characterization of Anostracospora rigaudi n. g., n. sp. and Enterocytospora artemiae n. g., n. sp., two new microsporidian parasites infecting gut tissues of the brine shrimp Artemia

Additive‐Free Dispersion of Single‐Walled Carbon Nanotubes and Its Application for Transparent Conductive Films

Thin-Film Field-Effect Transistors Based on Composites of Semiconducting Polymer and Carbon Nanotubes