Abstract:Systematic errors induced by distortions in the pump pulse of conventional Brillouin distributed fiber sensors are thoroughly investigated. Experimental results, supported by a theoretical analysis, demonstrate that the two probe sidebands in standard Brillouin optical time-domain analyzers provide a non-zero net gain on the pump pulse, inducing severe distortions of the pump when scanning the pump-probe frequency offset, especially at high probe power levels. Compared to the impact of non-local effects reported in the state-of-the-art, measurements here indicate that for probe powers in the mW range (below the onset of amplified spontaneous Brillouin scattering), the obtained gain and loss spectra show two strong side-lobes that lead to significant strain/temperature errors. This phenomenon is not related to the well-known spectral hole burning resulting from pump depletion, but it is strictly related to the temporal and spectral distortions that the pump pulse experiences when scanning the Brillouin gain/loss spectrum. As a solution to this problem, a novel scanning scheme for Brillouin sensing is proposed. The method relies on a fixed frequency separation between the two probe sidebands, so that a flat zero net gain is achieved on the pump pulse when scanning the pump-probe frequency offset. The proposed technique is experimentally validated, demonstrating its ability to completely cancel out non-local effects up to a probe power ultimately limited by the onset of amplified spontaneous Brillouin scattering. The method allows for one order of magnitude improvement in the figure-of-merit of optimized long-range Brillouin distributed fiber sensors, enabling measurements along a 100 km-long sensing fiber with 2 m spatial resolution and with no need of added features for performance enhancement.

System optimization of a long-range Brillouin-loss-based distributed fiber sensor.

94 km Brillouin distributed optical fiber sensors based on ultra-long fiber ring laser pumping]

Investigation on Optimized Launch Power in the Distributed Brillouin Fiber Sensor Design

Performance of long-range loss-mechanism Brillouin optical-fiber time-domain analysis

Extending the Sensing Range of Brillouin Optical Time-Domain Analysis Combining Frequency-Division Multiplexing and In-Line EDFAs

Bi-Directional Brillouin Optical Time Domain Analyzer System for Long Range Distributed Sensing

High-spatial-resolution Fast Brillouin Optical Fiber Sensor for Distributed Dynamic Measurement Based on Differential Double-Pulse

2-Km-range and 2-Cm-spatial-resolution Brillouin Optical Fiber Sensor Using a Transient Differential Pulse Pair

Dynamic Distributed Optical Fiber Sensing Based on Simultaneous Measurement of Brillouin Gain and Loss Spectra with Frequency-Agile Technique.

Modulated Pulses Based High Spatial Resolution Distributed Fiber System for Multi-Parameter Sensing

Long-range BOTDA Sensor over 50 Km Distance Employing Pre-Pumped Simplex Coding

Hybrid Fiber-Optic Sensing Integrating Brillouin Optical Time-Domain Analysis and Fiber Bragg Grating for Long-Range Two-Parameter Measurement

Time-division Multiplexing-Based BOTDA over 100km Sensing Length

High-Performance Distributed Brillouin Optical Fiber Sensing

124km Phase-Sensitive Otdr With Brillouin Amplification

Design and Realization of Briliouin Optical Time Domain Reflectometer with 34km in Sensing Length

Enhanced Sensing Performance in Long Distance Brillouin Optical Time-Domain Analyzer Based on Raman Amplification: Theoretical and Experimental Investigation

Optimization of long-range BOTDA sensors with high resolution using first-order bi-directional Raman amplification

Novel scanning method for distortion-free BOTDA measurements

Vector Brillouin optical time-domain analysis with Raman amplification and optical pulse coding

Long-distance Fiber Bragg Grating Sensor System Based on Time Division Multiplexing and Narrow Wavelength Swept Laser