Abstract:In laser-induced breakdown spectroscopy (LIBS), a focused laser pulse is used to ablate material from a surface and form a laser plasma that excites the vaporized material. Geometric factors, such as the distance between the sample and the focusing lens and the method of collecting the plasma light, can greatly influence the analytical results. To obtain the best quantitative results, one must consider this geometry. Here we report the results of an investigation of the effect of sampling geometry on LIBS measurements. Diagnostics include time-resolved spectroscopy and temporally and spectrally resolved imaging using an acousto-optic tunable filter (AOTF). Parameters investigated include the type of lens (cylindrical or spherical) used to focus the laser pulse onto the sample, the focal length of the lens (75 or 150 mm), the lens-to-sample distance (LTSD), the angle-of-incidence of the laser pulse onto the sample, and the method used to collect the plasma light (lens or fiber-optic bundle). From these studies, it was found that atomic emission intensities, plasma temperature, and mass of ablated material depend strongly on the LTSD for both types of lenses. For laser pulse energies above the breakdown threshold for air, these quantities exhibit symmetric behavior about an LTSD approximately equal to the back focal length for cylindrical lenses and asymmetric behavior for spherical lenses. For pulse energies below the air breakdown threshold, results obtained for both lenses display symmetric behavior. Detection limits and measurement precision for the elements Be, Cr, Cu, Mn, Pb, and Sr, determined with the use of 14 certified reference soils and stream sediments, were found to be independent of the lens used. Time-resolved images of the laser plasma show that at times >5 μs after plasma formation a cloud of emitting atoms extends significantly beyond the centrally located, visibly white, intense plasma core present at early times (<0.3 μs). It was determined that, by collecting light from the edges of the emitting cloud, one can record spectra using an ungated detector (no time resolution) that resemble closely the spectra obtained from a gated detector providing time-resolved detection. This result has implications in the development of less expensive LIBS detection systems.

Characterization of a Tunable Optical Parametric Oscillator Laser System for Multielement Flame Laser Excited Atomic Fluorescence Spectrometry of Cobalt, Copper, Lead, Manganese, and Thallium in Buffalo River Sediment

Sensitivity improvement in the measurement of minor components by spatial confinement in fiber-optic laser-induced breakdown spectroscopy

Effect of Sampling Geometry on Elemental Emissions in Laser-Induced Breakdown Spectroscopy

Flame-assisted plasma modulation to improve the raw signal quality for laser-induced breakdown spectroscopy

Benchmark Evaluation of a Single Frequency Continuous Wave OPO Seeded Pulsed Dye Amplifier for High-Resolution Laser Spectroscopy

Multi-element signal enhancement mechanism investigation for laser ablation-assisted ultraviolet laser excited atomic fluorescence

Laser-induced Molecular Fluorescence Diagnosis of Aluminum Monoxide Evolution in Laser-Induced Plasma

Parametric Evaluation of Laser Ablation and Ionization Time-of-flight Mass Spectrometry with Ion Guide Cooling Cell

Evaluating Laser-Induced Breakdown Spectroscopy Sensor Technology for Rapid Source Characterization of Rare Earth Elements

Improvement of Spectral Intensity and Resolution with Fiber Laser for On-Stream Slurry Analysis in Laser-Induced Breakdown Spectroscopy

Sensitive Elemental Analysis of Aqueous Colloids by Laser-Induced Plasma Spectroscopy

On the Spectral Identification and Wavelength Dependence of Rare-Earth Ore Emission by Laser-Induced Breakdown Spectroscopy

Board of Medicine received 225 allegations last year.

Experimental Investigation of Laser-Induced Breakdown Spectroscopy Assisted with Laser-Induced Fluorescence for Trace Aluminum Detection in Steatite Ceramics.

Double-pulse neodymium YAG/Carbon dioxide laser-induced breakdown spectroscopy for excitation of bulk and trace analytes

Accuracy improvement of quantitative analysis in spatially resolved fiber-optic laser-induced breakdown spectroscopy

Tuning Excitation Laser Wavelength for Secondary Resonance in Low-Intensity Phase-Selective Laser-Induced Breakdown Spectroscopy for In-Situ Analytical Measurement of Nanoaerosols

AlO molecular spectral emission enhanced by delayed double-pulse laser ablation of aluminum target in air

Studies of 3 beta-hydroxysteroid dehydrogenase genes in infants and children manifesting premature pubarche and increased adrenocorticotropin-stimulated delta 5-steroid levels.

Calibration-free Analysis of Immersed Metal Alloys Using Long-Pulse-duration Laser-Induced Breakdown Spectroscopy

Improving signal stability and analysis accuracy in laser-induced breakdown spectroscopy by multi-directional collection