Abstract:The effect of liquid-level height (H) on floc growth during flocculation has been investigated in unbaffled square stirred tanks with a fixed bottom width (D). Firstly, flocculation tests were performed by using an in situ recognition system for floc morphology to evaluate flocculation performance within each tank at three typical shear rates of Gave=10, 30 and 70s−1. Then, turbulent flow fields generated under all flocculation-test conditions were predicted by computational fluid dynamics (CFD) simulations, followed by a detailed discussion based on experimental and numerical data. It was found that stirred tanks with different H values (characterized by H-to-D ratio) caused distinct turbulent flow fields at the same shear rates examined, reflected by different turbulent intensities in the impeller zone and different non-uniform nature of turbulence in the overall flocculating system. Accordingly, the evolution of floc size and structure was greatly affected due to various aggregation and breakage kinetics. Moreover, the effect of H-to-D ratio on floc growth appeared to be related to the predominant growth mechanism(s), i.e., for the shear rates of Gave=10 and 30s−1, little or no significant breakage occurred and more significant non-uniformity of turbulence generated in the stirred tank with a higher H-to-D ratio led to increasingly pronounced behavior of restructuring, forming aggregates with more compact structure caused by primary-particle rearrangement, whereas at Gave=70s−1, breakage dominated over aggregation and resultant aggregates became smaller and more compact with increasing H-to-D ratios, possibly due to the irreversibility of floc breakage. Therefore, an appropriate liquid-level height of tank should be designed to enhance floc formation and subsequent particle removal efficiency. The combined means of flocculation tests and CFD simulations may provide useful insights for optimizing the design and operation of stirred-tank reactors for flocculation.

[Flocculation Characteristics and Mechanism of a Conical Fluidized-Bed Reactor].

Flocculation Parameter and Fractal Dimension Model in a Conical Fluidized Bed

Suspended Solid Abatement in a Conical Fluidized Bed Flocculator

CFD Simulation of an Agitated Gas-Fluidized Bed: Effects of Particle–particle Restitution Coefficient on the Hydrodynamics

Abatement Efficiency and Controlling Strategy of a Cylindrical and a Conical Fluidized Bed Flocculator

Stable Operating Range and Solids Residence Time of Fine Fluorite Particles in the Two-Stage Fluidized Bed

Multi-scale Characteristics and Gas-Solid Interaction among Multiple Beds in a Dual Circulating Fluidized Bed Reactor System

Particle Agglomeration and Control of Gas-Solid Fluidized Bed Reactor with Liquid Bridge and Solid Bridge Coupling Actions

Particle Fluidization Characteristics and Transition in a Hot Gas-Solid Fluidized Bed with Liquid Injection

Set-up method of multi-velocity gradient in a fluidized flocculation bed and characterization of its impact on flocculation reaction

Effect of Double-Stage Velocity Gradients on Abatement and Morphology Characteristics of Flocs in A Conical Fluidized-Bed Flocculator

The Role of Mixing Hydrodynamics on Floc Growth in Unbaffled Square Stirred-Tank Reactors for Flocculation

Anti-shock Loading Capability of a Fluidized-Bed Flocculator

Effects of Interparticle Forces on Fluidization Characteristics in Liquid-Containing and High-Temperature Fluidized Beds

Study on Influence Factors in Flocculation Conditions of Bioflocculant

Analysis of Floc Morphology in a Continuous-Flow Flocculation and Sedimentation Reactor

Particle flocculation in a stirred tank: A microscopic test by coupled CFD-DEM approach

Comparative Analysis on Flocculation Performance in Unbaffled Square Stirred Tanks with Different Height-to-width Ratios: Experimental and CFD Investigations

Review of Mechanism of Bioflocculation and Settleability of Activated Sludge Bioflocs

Intensification of flocculation efficiency in multi-stage reactors by optimizing the multi-cone segment configuration

Bioflocculation of mesophilic and thermophilic activated sludge