Abstract:Biofloc Technology (BFT) has been widely used in tilapia rearing. However, the Total Suspended Solids (TSS) at the bottom of rearing tank will increase to high concentration due to biofloc sedimentation and accumulation. Therefore, it will be have negative effects on the feeding enthusiasm, gill and even survival of cultured species, and especially in the initial stages of larvae culture. The Recirculating Biofloc Technology (RBFT) would be one of the potential solution for the above concerns. To achieve an accurate TSS regulation, the biofloc distribution should be as homogenous as possible. The aim of this work is to specify the optimal bubble size and Hydraulic Retention Time (HRT) to the uniformity of biofloc distribution in a RBFT system through Computational Fluid Dynamics (CFD) method. For this, a three-dimensional and three-phase unsteady transient model was developed to simulate the hydrodynamics in a gas-liquid-solid tilapia rearing tank based on the commercial software Workbenching 15.0. Firstly, to achieve a more reliable prediction, the influence of the grid types and the computation turbulence model (Standard, Renormalization-Group (RNG), Realizable) to the simulation result were discussed by contrasting the simulations and experiments results of solid holdup at dimensionless radial position. Secondly, appropriate mesh size (181395 elements) and mixture standard k-e model were implemented to study the effect of bubble size and HRT on solid distribution uniformity. Simulations were performed by using three different mean bubble sizes (diameter = 1, 2, 3 mm) and three different HRTs (0.56, 1.13, and 2.25 h) to study the sensitivity of the results to the uniformity of the biofloc distribution, respectively. The results showed that to get a better biofloc distribution, the bubble size should be range in 1 mm and 2 mm, and as the HRT decreasing, the distribution of biofloc distribution will be more homogeneous (0.45 <= HRT <= 0.56 h). This paper provides an essential data set for determining the bubble size and HRT in production, as well as evaluating the accuracy of various CFD models for capturing the complex flow field in a BFT rearing tank. (C) 2016 Elsevier B.V. All rights reserved.

The Role of Mixing Hydrodynamics on Floc Growth in Unbaffled Square Stirred-Tank Reactors for Flocculation

Numerical Study of Dense Solid-Liquid Flow in Hydrodynamic Vortex Separator Applied in Recirculating Biofloc Technology System

Applications of Computational Fluid Dynamics to Modeling Hydrodynamics in Tilapia Rearing Tank of Recirculating Biofloc Technology System

Particle flocculation in a stirred tank: A microscopic test by coupled CFD-DEM approach

Experimental and numerical characterization of floc morphology: role of changing hydraulic retention time under flocculation mechanisms

Intensification of flocculation efficiency in multi-stage reactors by optimizing the multi-cone segment configuration

Optimization of Hydraulic Condition on Flocculation for Micro-polluted Water

Numerical Simulation on Fluid Mixing by Effects of Geometry in Staggered Oriented Ridges Micromixers

Numerical investigation on mixing behaviour in the contact zone of an industrial‐scale dissolved air flotation tank

Flocculation under combined effects of hydrodynamic and subaqueous biomass in the bottom boundary layer (BBL) of a microtidal estuary

Flocculation of suspended cohesive particles in homogeneous isotropic turbulence

A Quantitative Lab Examination of Floc Fractal Property Considering Influences of Turbulence, Salinity and Sediment Concentration

A multi-stage enhanced flocculation reactor for the treatment of simulated shale gas hydraulic fracturing flowback fluid: Effect of aspect ratios for the intense mixing section

Growth of Floc Structure and Subsequence Compaction into Smaller Granules through Breakup and Rearrangement of Aluminum Flocs in a Constant Laminar Shear Flow

Study on the effect of folded plate angle on flocculation

Modeling Flocculation Processes of Fine-Grained Particles Using a Size-Resolved Method: Comparison with Published Laboratory Experiments

Estimating the Temporal Evolution of the Median Floc Size During Flocculation in A Turbulent Flow: an Empirical Expression

On The Kaolinite Floc Size At The Steady State Of Flocculation In A Turbulent Flow

Characterization of the Flocculation Process from the Evolution of Particle Size Distributions

Study on the effects of turbulence on cohesive sediment flocculation and settling properties

Experimental Research on the Floculation Characteristics of Cohesive Sediment in Turbulent Flow