Abstract:Many approximate arithmetic circuits have been proposed for high-performance and low-power applications. However, most designs are either hardware-efficient with a low accuracy or very accurate with a limited hardware saving, mostly due to the use of a static approximation. In this paper, an adaptive approximation approach is proposed for the design of a divider. In this design, division is computed by using a reduced-width divider and a shifter by adaptively pruning the input bits. Specifically, for a 2n/n division 2k/k bits are selected starting from the most significant `1' in the dividend/divisor. At the same time, redundant least significant bits (LSBs) are truncated or if the number of remaining LSBs is smaller than 2k for the dividend or k for the divisor, `0's are appended to the LSBs of the input. To avoid overflow, a 2(k + 1)/(k + 1) divider is used to compute the division of the 2k-bit dividend and the k-bit divisor, both with the most significant bits being `0'. Thus, k <; n is a key variable that determines the size of the divider and the accuracy of the approximate design. Finally, an error correction circuit is proposed to recover the error caused by the shifter by using OR gates. The synthesis results in an industrial 28nm CMOS process show that the proposed 16/8 approximate divider using an 8/4 accurate divider is 2.5χ as fast and consumes 34.42% of the power of the accurate 16/8 design. Compared with the other approximate dividers, the proposed design is significantly more accurate at a similar power-delay product. Moreover, simulation results show that the proposed approximate divider outperforms the other designs in two image processing applications.

Bias-scalable Inner-Product Approximation Circuit Using Analog Margin Propagation.

Synthesis of Bias-Scalable CMOS Analog Computational Circuits Using Margin Propagation

A bias-scalable current-mode analog support vector machine based on margin propagation

Variation-aware gate sizing and clustering for post-silicon optimized circuits.

Design Time Body Bias Selection for Parametric Yield Improvement.

Optimally Approximated and Unbiased Floating-Point Multiplier with Runtime Configurability

An Accurate Db-Linear CMOS VGA Based on Double Duplicate Biasing Technique

Performance Bound Approximation for Bearing Estimation with Bias Correction

Design of Differential Variable-Gain Transimpedance Amplifier in 0.18 Μm SiGe BiCMOS

Process, Bias and Temperature Scalable CMOS Analog Computing Circuits for Machine Learning

PAM: A Piecewise-Linearly-Approximated Floating-Point Multiplier with Unbiasedness and Configurability

Variability-Aware Approximate Circuit Synthesis via Genetic Optimization

A 100 Pj/bit, (32,8) CMOS Analog Low-Density Parity-Check Decoder Based on Margin Propagation

An adaptive analog low-density parity-check decoder based on margin propagation

A 3.6V Rail-to-Rail Operational Amplifier with Constant G M

Adaptable Approximate Multiplier Design Based on Input Distribution and Polarity

Diagnosing Bias Runaway in Analog/mixed Signal Circuits

Robust Analog Circuit Sizing Using Ellipsoid Method and Affine Arithmetic

Accelerated Aging in Analog and Digital Circuits with Feedback

Adaptive Approximation in Arithmetic Circuits: A Low-Power Unsigned Divider Design

Approximate Arithmetic Circuits: A Survey, Characterization, and Recent Applications