Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external Q factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

Design of Waveguide Bandpass Filter Based on Nonresonating 'T' Junctions

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

A Ka-band Waveguide Bandpass Filter Designed by Transmission Zero Resonator Pairs (Tzrps).

Compact Dual‐layer Substrate‐integrated Waveguide Bandpass Filters with Controllable Transmission Zeros

A Class of Box-Like Bandpass Filters with Wide Stopband Based on New Dual-Mode Rectangular SIW Cavities

Synthesis of wide-band bandpass filters with quarter-wavelength resonators

Design of Wide Stopband for Waveguide Low-Pass Filter Based on Circuit and Field Combined Analysis

Design of WR5 Waveguide Bandpass Filter using Oversized Spherical Resonators

DIMENSIONAL SYNTHESIS FOR WIDE-BAND BAND- PASS FILTERS WITH QUARTER-WAVELENGTH RES- ONATORS

W-Band Waveguide Filters and Diplexer Using Metal Stripline Resonators

A Compact Fourth-order Bandpass Filter with High Selectivity and Out-of-band Suppression

Compact and Wide Stopband Bandpass Filters Based on Dual-Mode Folded Circular Substrate Integrated Waveguide Cavities

W -Band E -Plane Waveguide Filter Using Compact Beeline Resonator

Design Of Wideband Bandpass Filter Using Short-Circuited Circular Patch Resonator Loaded With Slots

The Design of Coupled Resonator Bandpass Filter with Wide Stop-Band

WR-2.8 Band Pseudoelliptic Waveguide Filter Based on Singlet and Extracted Pole Resonator

A D-band Extracted Pole Waveguide Bandpass Filter Based on TE202 and TE301 Resonator

Compact Box-Section Bandpass Filter with Improved Frequency Selectivity

Compact Wideband Bandpass Filter Based on Double-T-shaped Stub Loaded Resonator and Loading Technique for Zero-Voltage Point

Coplanar Waveguide Bandpass Filters with Separated Electric and Magnetic Couplings