Abstract:This article presents a Ka-band fourth-order slotted spherical resonator waveguide bandpass filter (BPF) with a wide spurious suppression stopband. It uses the first higher-order TM211 mode rather than the fundamental TM101 mode of the spherical resonator in order to obtain a higher unload quality factor (Q u ) for smaller in-band insertion loss, as well as a larger filter volume that gives better tolerance to fabrication errors in high frequency applications. By introducing slots that interrupt surface currents, the fundamental TM101 and two higher spurious modes (TE101 and TM311) can be suppressed without compromising the unloaded quality factor of the TM211 mode. In addition, the filter topology is optimized to further enhance the suppression level of the spurious passbands. AZ-shaped topology has been found effective in decreasing the coupling strength of the spurious TM311 mode. An analysis is performed to demonstrate the better tolerance of the Z-shaped filter over the conventional TM101-mode spherical resonator filter. For verification, a fourth-order slotted spherical resonator waveguide BPF with a center frequency of 31 GHz and bandwidth of 880 MHz is designed and manufactured using a selective laser melting (SLM) 3-D printing process. The measured results show an average in-band insertion loss of 1.53 dB, and a passband return loss better than 13.6 dB. The stopband of the filter is extended up to 40.9 GHz with a rejection level greater than 20 dB.

Design of WR5 Waveguide Bandpass Filter using Oversized Spherical Resonators

A triple-mode ring dielectric resonator band-pass filter using substrate integrated waveguide (SIW)

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

A 3-D Printed Bandpass Filter Using TM₂₁₁-Mode Slotted Spherical Resonators with Enhanced Spurious Suppression

A Class of Box-Like Bandpass Filters with Wide Stopband Based on New Dual-Mode Rectangular SIW Cavities

A Lightweight 3-D Printed X-Band Bandpass Filter Based on Spherical Dual-Mode Resonators

Substrate Integrated Waveguide (SIW) Filter with Hexagonal Resonator

WR‐1.5 (500–750 GHz) Waveguide Bandpass Filter Fabricated Using High Precision Computer Numerically Controlled Machining

A 3-D Printed X-Band Waveguide Folded Filter

WR-2.8 Band Pseudoelliptic Waveguide Filter Based on Singlet and Extracted Pole Resonator

3-D Printed Slotted Spherical Resonator Bandpass Filters with Spurious Suppression

Compact, Dual‐band, and Hybrid Filter Based on Combline and Substrate Integrated Waveguide Resonators

A Compact Fourth-order Bandpass Filter with High Selectivity and Out-of-band Suppression

Design of a $W$ -Band GaAs-Based SIW Chip Filter Using Higher Order Mode Resonances

An X-band Waveguide Bandpass Filter with Enhanced Stopband Using Offset Resonators

Low‐loss X‐band waveguide bandpass filter based on rectangular resonators

Monolithic 3D Printed Waveguide Filters with Wide Spurious‐free Stopbands Using Dimpled Spherical Resonators

A 3D Printed Waveguide Hybrid Bandpass Filter Integrated with Twisting and Bending Functionalities

A 3D Printed X-Band Waveguide Filter Based on Bowtie-Shaped Resonator

400 GHz Easy-Packaging Waveguide Filters Based on Mixed-Mode and Off-Axis Couplings

A 3-D Printed Ku-Band Waveguide Filter Based on Novel Rotary Coupling Structure