Abstract:A flexible wing with a large aspect ratio emerges in many modern engineering applications (e.g. solar planes and super large wind turbine blades) and its interaction with incident flow differs markedly from conventional fluid-structure interactions (FSI), exhibiting frequently a large three-dimensional (3D) deformation. Yet, there is little information on how such deformation may change wing aerodynamics. This work investigates the aerodynamic performance of deformed and cantilever- supported NACA0012 rigid wings with an aspect ratio of 9, using ANSYS Fluent with the SST-kappa-w turbulence model at a chord-length-based Reynolds number Recof c of 1.5 x 105. 5 . Numerical simulation is validated experimentally. The wing tip bending displacement is up to 4.14c, and the maximum twisted angle is up to 7 degrees. degrees . The angle alpha of attack varies from 0 degrees degrees to 20 degrees degrees at mid span of the wing. It has been found that the torsional deformation can significantly advance the local flow separation, reattachment, bubble length, and transition from laminar to turbulence, resulting in a drop in the critical angle alpha cr of attack, at which the separation bubble size reaches the maximum. Accordingly, the lift and drag coefficients increase, as well as the bending and pitching-up moments, though the stall is advanced due to a change in local alpha. The tip vortex is also enhanced, inducing strong downwash postponing the separation bubble on the wing and resulting in redistributed force near the wing tip that increases markedly the local bending moment but decrease the local pitching-up moment. On the other hand, the bending deformation tends to produce an effect opposite to the torsion on the flow structure and causing little change in the lift coefficient, though reducing the induced drag and moments appreciably. With both deformations in place, the torsion overwhelms the bending in general in terms of its impact upon aerodynamics and flow structures, the latter acting to cancel at least partially the effect of the former.

The flow field characters of a two-dimensional deformable wing heaving in a viscous flow

Numerical Simulation on Flow and Thrust Around Fish-Like Undulating Wing

Computational study on the hovering mechanisms of a chordwise flexible wing

Computational fluid-structure interactions of a 3d flexible flapping wing

Numerical simulations of the flapping of a three-dimensional flexible plate in uniform flow

Numerical simulation and dynamic mode decomposition analysis of the flow past wings with spanwise waviness

NUMERICAL STUDY ON THE EFFECT OF FLEXIBLITY OF A FLAPPING WING ON ITS AERODYNAMIC PERFORMANCE

Effect of Wing Flexibility on the Lift Force Generated by a 2D Model Insect Wing Flapping in Hover Mode

Aerodynamics of a Three-Dimensionally Deformed Rigid Wing

NUMERICAL STUDIES ON THE PROPULSION AND WAKE STRUCTURES OF FINITE-SPAN FLAPPING WINGS WITH DIFFERENT ASPECT RATIOS

Simulations of dynamics of plunge and pitch of a three-dimensional flexible wing in a low Reynolds number flow

Computation of Unsteady Viscous Flow Around a Locally Flexible Airfoil at Low Reynolds Number

Fluid Structure Interaction of Unsteady Aerodynamics of Flapping Wing at Low Reynolds Number

Numerical Study of Two-Dimensional Heaving Airfoils in Ground Effect

Effect of flexibility on flapping wing characteristics under forward flight

The aerodynamic performance of flexible wing in plunge

Numerical Solution of NaVier-Stokes Equations for Flow over a Flapping Wing

The Effect of Torsional and Bending Stiffness on the Aerodynamic Performance of Flapping Wing

Flow Characteristic Study on Wake Flow of High-speed Vehicles

Three-dimensional Flow Visualization and Vorticity Dynamics in Revolving Wings

Analysis of nonlinear aerodynamic performance and passive deformation of a flexible flapping wing in hover flight