Abstract:The F317 fault, as a major tectonic zone in the Jianshan mine area, influences the geotectonic features and geomechanical properties of the mine area. Mining operations need to be conducted within these tectonic systems, so it is important to fully study and understand the characteristics and evolution of these tectonic systems to develop reasonable mining plans and safety measures. Aiming at the problem that the existence of the F317 fault affects the stability of the west road during the mining of the security pillar at The Jianshan underground mine in Panzhihua Iron Mine, the mechanical model of the fault surface was established through the theory of material mechanics. The mechanical criterion of fault slip during the security pillar retrieval process was obtained and combined with the contact surface theory in the numerical analysis software FLAC3D. Two numerical calculation models with and without the F317 fault were established to analyze the change characteristics of the maximum tensile stress and displacement of the road protection zone under different simulation scenarios. The influence of the fault’s presence on the surface road’s stability during the security pillar retrieval process was obtained. The study results show that changes in positive and shear stresses at the fault face caused by the security pillar retrieval process are the main factors influencing the fault slip. The upper side of the fault tends to slip along the fault face during the security pillar retrieval process, which theoretically prevents the transfer of subsidence displacement caused by underground mining to the roadside (foot side of the fault). The presence of the F317 fault has less effect on the tensile stresses at the road protection zone. Still, the fault allows the tensile stresses to be concentrated at the top and bottom of the quarry and at the isolated pillar, which is more likely to cause the rock to be stretched and squeezed. Without the F317 fault, the maximum subsidence displacement at the road protection zone is 30.59 mm, the maximum X-directional displacement is 42.17 mm (both of which are greater than the safe displacement limit by 20 mm), and the maximum Y-directional displacement is 19.75 mm, which is less than the safe displacement limit by 20 mm. Compared with the case without the F317 fault, the displacement at the road protection zone with the F317 fault is smaller, with a maximum subsidence displacement of 16.92 mm, a maximum X-directional displacement of 19.63 mm, and a maximum Y-directional displacement of 3.35 mm, all of which are less than the safe displacement limits. Therefore, the presence of the F317 fault provides some protection to the west side of the road from collapse due to underground mining.

Notice of Retraction Numerical Simulation of Time-Varying Effect to Induction Caving Roof Based on RFPA2D

Numerical Simulation of Surface Subsidence and Backfill Material Movement Induced by Underground Mining

On Danger-Area Forecast System of Working Face Opening Roof Caving

An Innovative Method of Gob-Side Entry Retaining to Control the Non-collapse Behaviors of Hard Roofs: a Case Study

Research and Application of Roof Cutting and Pressure Release Technology of Retracement Roadway in Large Height Mining Working Face

Failure mechanism of directional roof cutting and design method optimization

Using the Relaxation Test to Study Variation in the Time-Dependent Property of Rock and the Consequent Effect on Time-Dependent Roof Failure

Effect of the roof cutting technique on the overlying geotechnical structure in coal mining

Numerical modelling of loose top coal and roof mass movement for a re-mined seam using the top coal caving method

Analysis and Application of Hydraulic Fracturing to Control Hard and Stable Roof in Initial Mining Stage

Study on the characteristic of overburden rock structure and support system of the retraction channel in layered fully mechanized caving face

Numerical Simulation of Underground Mining-Induced Fault-Influenced Rock Movement and Its Application

Insight and Effectiveness of Working-Face Deep-Hole Blasting for Prevention of Strong Seismicity Induced by Deep Coal Mining

A Field Study Implementing New Monitoring Technology for Roof Caving and Systematic Monitoring for Gob-Side Entry Retaining via Roof Cutting in Underground Coal Mining

Multifield Environmental Analysis and Hazards Prevention of Steeply Inclined Deep Coal Mining

Numerical Study of the Mechanism of Dense Drillings for Weakening Hard Roofs and its Application in Roof Cutting

A Three-Dimensional Supporting Technology, Optimization and Inspiration from a Deep Coal Mine in China

Failure analysis and prediction of roof instability in end face under repeated mining using early warning system

Study on roof breaking mechanism and support stability of steeply dipping seam and large mining height

Study on the Spatiotemporal Dynamic Evolution Law of a Deep Thick Hard Roof and Coal Seam

Chamber roof deformation prediction and analysis of underground mining using experimental design methodologies