Abstract:A high-current vacuum arc subjected to an axial magnetic field is maintained in a diffuse status. With an increase in arc current, the energy carried by the arc column to the anode becomes larger and finally leads to the anode temperature exceeding the melting point of the anode material. When the anode melting pool is formed, and the rotational plasma of the arc column delivers its momentum to the melting pool, the anode melting pool starts to rotate and also flow outwards along the radial direction, which has been photographed by some researchers using high-speed cameras. In this paper, the anode temperature and melting status is calculated using the melting and solidification model. The swirl flow of the anode melting pool and deformation of the anode is calculated using the magneto-hydrodynamic (MHD) model with the volume of fraction (VOF) method. All the models are transient 2D axial-rotational symmetric models. The influence of the impaction force of the arc plasma, electromagnetic force, viscosity force, and surface tension of the liquid metal are all considered in the model. The heat flux density injected into the anode and the arc pressure are obtained from the 3D numerical simulation of the high-current vacuum arc using the MHD model, which gives more realistic parameters for the anode simulation. Simulation results show that the depth of the anode melting pool increases with an increase in the arc current. Some droplets sputter out from the anode surface, which is caused by the inertial centrifugal force of the rotational melting pool and strong plasma pressure. Compared with the previous anode melting model without consideration of anode deformation, when the deformation and swirl flow of the anode melting pool are considered, the anode temperature is relatively lower, and just a little more than the melting point of Cu. This is because of liquid droplets sputtering out of the anode surface taking much of the energy away from the anode surface. The azimuthal velocity of the anode melting pool for arc current 12.5 kA root-mean-square (rms) is larger than that for 17.5 kA (rms), which is likely to be caused by the thinner liquid layer, and also a smaller melting pool mass of 12.5 kA.

Simulation and Experimental Studies of Anode Activities in High-Current Vacuum Arcs

Anode Activity in a High-Current Vacuum Arc: Three-Dimensional Modeling and Simulation

A coupled simulation model of the heating process on an anode under high-current vacuum arcs

Modelling and simulation of anode activity in high-current vacuum arc

Investigation of the Swirl Flow on Anode Surface in High-Current Vacuum Arcs

Numerical simulation of anode activity under action of high-current vacuum arc

3d Numerical Simulation Of Vacuum Arc With Anode Vapor In Actual Magnetic Fields

Kinetic Numerical Simulation of Anode Sheath of Vacuum Arcs

Simulation of Surface Erosion of Anode under High-Current Vacuum Arcs

Experimental Investigation of Anode Activities in High-Current Vacuum Arcs

Simulation Of Heat Transfer And Fluid Flow In An Anode Melting Pool Under High-Current Vacuum Arcs

Simulation Researches on Influence of Different Axial Magnetic Fields on Anode Activity in High-current Vacuum Arcs

Investigation on Anode Plume in High-Current Vacuum Arc by Experiments and Simulations

3D Numerical Simulation of High Current Vacuum Arc in Realistic Magnetic Fields Considering Anode Evaporation

Experimental Study of Anode Activities in High Current Vacuum Arc Subjected to Axial Magnetic Fields under Different Conditions

Modeling and Simulation of the Interaction Between High-Current Vacuum Arc and Anode Vapor

Numerical simulation of swirl flow and deformation of the anode melting pool in high-current vacuum arcs subjected to axial magnetic field

Simulation of Anode Thermal Process in Vacuum Arc Under Axial Magnetic Field

Modeling of the anode surface deformation in high-current vacuum arcs with AMF contacts

Modeling and Simulation of Vacuum Arc Plasma Transport Properties Under the Influence of Anode Melting Pool

Research Progress of Model of Vacuum Arc and Anode Activity under Axial Magnetic Fields