Abstract:In contrast to traditional 60 Hz transformer, solid state transformer (SST) offers power flow control, integration of renewables and maintaining grid stability in high renewable penetration scenario. Like a typical power converter, SST requires low voltage (24 V dc) power for its control and sensing circuits. In running condition, this power is derived from its low voltage dc bus at 400 V. But it is challenging to derive it during start-up, because the only source available during start-up is the distribution grid at 7.2 kV, 60 Hz. Due to high input voltage (7.2 kV, 60 Hz), deriving a control supply of about 150 W, even for just start-up duration of about 200 ms, presents a novel power electronics problem. In this paper, two solutions have been proposed to address this issue, by taking a 20 kVA, 6.5 kV Si IGBT and 15 kV SiC MOSFET based SSTs as the reference converters. The first solution is generic and is based on storing the required start-up energy in a dc capacitance. This is based on developing a cost-effective high voltage switch using low voltage IGBTs with self-driven functionality. The second solution, applicable only to SST topologies with high voltage ac capacitive filter, is to tap the energy from the capacitor itself. The fundamental constraints considered for both the solutions are practical feasibility at high voltage (7.2 kV ac or over 10 kV dc), power loss, size, weight and cost-effectiveness. Experimental validation of extracting continuous power for the IGBT gate driver ICs from the snubber is presented with 200 V input. And, the results of the auxiliary power derivation from the filter capacitor are shown with 5.7 kV ac input.

Voltage and power balance control for a cascaded multilevel solid state transformer

Research on Voltage and Power Balance Control for Cascaded Modular Solid-State Transformer

Voltage and Power Balance Control for a Cascaded H-Bridge Converter-Based Solid-State Transformer

Comparisons of different control strategies for 20kVA solid state transformer

3-D Space Modulation with Voltage Balancing Capability for A Cascaded Seven-Level Converter in A Solid-State Transformer

A Five-level AC/DC Converter for MV Solid-State Transformer

Voltage and power balance control strategy for three-phase modular cascaded solid stated transformer

Power and Voltage Balance Control of a Novel Three-Phase Solid-State Transformer Using Multilevel Cascaded H-Bridge Inverters for Microgrid Applications

500kva Hybrid Solid State Transformer (Hsst): Architecture, Functionality And Control

An Average Model of Solid State Transformer for Dynamic System Simulation

Auxiliary power supply for Solid State Transformers

A Coordinate and Distributed Control Scheme for Multilevel and Multi-Stage Medium Voltage Solid State Transformer

Design and Implementation of High Efficiency Control Scheme of Dual Active Bridge Based 10 Kv/1 MW Solid State Transformer for PV Application

Design And Demonstration Of A Sic-Based 800-V/10-Kv 1-Mw Solid-State Transformer For Grid-Connected Photovoltaic Systems

270 Kva Solid State Transformer Based on 10 Kv SiC Power Devices

Rectifier Stage Operation and Controller Design for A Medium Voltage Solid State Transformer with Lcl Filter

Adaptive Control Strategy of Solid State Transformer with Fast Dynamic Response and Enhanced Balance Performance

Active Thermal Control for Cascaded H-Bridges in Solid State Transformers

Current and Voltage-Balancing Control of A Grid-Connected Single-Stage Modular PV Plus Storage Solid State Transformer (PVS-SST)

High-Efficiency Control Strategy for 10-Kv/1-mw Solid-State Transformer in PV Application