Abstract:A novel numerical analysis method based on the charge simulation method (CSM) is proposed. The distribution characteristics of three‐dimensional electric fields in the near‐field area were analysed. The electric field surrounding the antenna exhibited axial symmetry. The highest electric field strength was at the top of the antenna, and as the distance from the antenna increased, the electric field strength exponentially decreased. The comparisons are performed between the results of the CSM and those of commercial software, the average relative errors of CSM on two observation paths are very small, 2.20% and 2.21%, respectively. Additionally, the CSM shows considerable advantages in saving calculation resources and improving efficiency. To further verify the effectiveness of the proposed method, the comparison between CSM calculation and the measured data is carried out. The results show that this method can accurately calculate the electric field near VLF transmitting antenna and offer valuable insights and a new solution. Very‐low‐frequency (VLF) transmitting antennas have a crucial influence on the nearby electromagnetic environment. Commercial software packages, such as CST Studio Suite (CST) or Altair FEKO (FEKO), are always utilised to calculate the electric fields of VLF antennas, which consume considerable computing resources and time. The classical method of electric field calculation, the charge simulation method (CSM), is first applied to the calculation of electric field near the VLF transmitting antenna. The distribution characteristics of three‐dimensional electric fields were analysed. The electric field surrounding the antenna exhibited axial symmetry. The highest electric field strength was at the top of the antenna, and as the distance from the antenna increased, the electric field strength exponentially decreased. The comparisons are performed between the results of the CSM and those of commercial software, the average relative errors of CSM on two observation paths are very small, 2.20% and 2.21%, respectively. Meanwhile, the CSM shows considerable advantages in saving calculation resources and improving efficiency. Additionally, the comparison between CSM calculation and the measured data is carried out. The results show that this method can accurately calculate the electric field near VLF transmitting antenna and offer valuable insights and a new solution.

A novel near-field measurement method for predicting far-field monostatic RCS of targets

Target scattering coefficient measurement system and method

A Local RCS Diagnosis Method Based on Near Field Measurement

High-precision RCS Measurement of Aircraft's Weak Scattering Source

Analyzing The Scattering Near-Field From Complex Targets

Near-Field Measurements Based Source Reconstruction Approach for Radiated Emissions Prediction

Reactive Magnetic Near-Field to Far-Field Transformation Based on Plane Wave Spectrum at PCB Level

Research on Methods of Targets’ RCS Near-field-to-far-field Transformation Based on 3-D SAR Imaging

Far-field Prediction from Amplitude-Only Near-Field Measurements Using Equivalent Electric Currents

Simulation of 3-D SAR imaging based outdoor RCS measurement technique

Review of Near-Field EMI Measurement

Novel numerical analysis of electric fields in the near field of very‐low‐frequency antennas based on the charge simulation method

Prediction Computing Complex Targets Near-Field Electromagnetic Scattering Characteristics

Efficient Numerical Modeling of Monostation RCS for Electrically Extreme Large PEC Targets

Near‐field scattering centre modelling for complex targets

A Linear-Scan-Based Wideband Single-Cut Near-Field RCS Measurement Technique with Wide Effective Angle Coverage

Reactive Near-Field to Far-Field Transformation Based on Equivalent Dipoles

A Hybrid Schatten P -Norm and Lp -Norm with Plane Wave Expansion Method for Near–Near Field Transformation

The RCS Scaled-Measurement and Inversion Method for Metal Targets With Rough Surfaces Based on the Distribution of Surface Elements in the THz Band

An Effective Source Reconstruction Method of EMI Sources in Shielding Based on Phaseless Near-Field Scanning

An Effective and Efficient Approach for Radiated Emission Prediction Based on Amplitude-Only Near-Field Measurements